PLUG'N'GROW PNG-030 User manual

Controller specications
Controller specs
-Size : 53/4’’x51/2’’x11/2’’
-Weight : 1,6 lbs
-Digital display : Yes
-Day/night detection : Photocell
-Day/night setpoints : Yes
How to get started
Error code
1- Plug the PNG-030 piggyback in the AC 120 outlet you want to use to
supply your equipment.
2- Plug in the piggyback the equipement (max load 15 amps) you wish to
control the humidity with.
3- Set day setpoint (upper knob) and night setpoint (lower knob).
4 - Set the operating mode to humidier of dehumidier (with the mode
button).
5- Use preset or automatic dierentials by pushing the lower button.
Auxiliary device control
-Controlled actions : humidica-
tion or dehumication
-Controlled auxiliary outputs: 1
-Simultaneously controlled
equipment :1
Humidity control
-Sensor accuracy : ± 2%
-Adjustable humidity setpoint : 20 to 90%
-Controlled equipment : humidier, dehumidier, fogging de-
vice or intake/exhaust fans
Electrical specication
-Power supply : 120V - 20A - 60Hz
-Output maximum current: 120V-
15A - 1HP
-Operating conditions : 0 to 60 °C,
0 to 95 % non-condensing RH
Manufacturer
-Warranty : 3 years
-Technical support : Free
support, 5AM to 19PM,
Monday-Friday, Eastern time
-Country of origin : Canada
= Ready to go
= Calibrating
= Error
Error 4 : bad readings from the humidity sensor.
Consequence : the controlled output is off as
long as the error persist.
Action : Remove the power for 5 secondes and
put it back on.
Quick feature:
- Press and hold the mode button 6 secondes to activate or deactivate lock
mode (lock mode = setpoints locked)
www.plugngrowcontrollers.com 1-888-577-6274