Pni Ip230t User manual

PNI IP230T 1080P

Wifi PTZ H264+ MicroSD slot

Night vision Tuya app P2P

Movement tracking surveillance camera

Quick Start Guide / Ръководство за бърз старт / Schnellstart Anleitung / Guía de inicio rápido / Quide de

Démarrage Rapide / Gyors

üzembe helyezési útmutató /Guida Rapida/ Skrócona instrukcja obsługi/Ghid rapid de congurare

EN User manual ............................................. 2

RO Manual de utilizare ................................... 9

1. ABOUT PNI IP230T 1080P CAMERA

Product introduction and main features:

PNI IP230T product is a 2MP IP camera intended for video/audio surveillance and remote monitoring

of desired locations. It connects to the Internet by cable of Wireless in order to remotely transmit realtime

video to dedicated app on your smartphone anytime and anywhere. It can save surveillance videos on local

microSD card or other compatible devices like PNI surveillance NVR. The camera also supports Motion

Tracking , White light at motion detection, alarm functions such as smartphone notications push and much

more other functions.

● High denition recording ● Wireless / wired conection

● Schedule Recording ● MicroSD TF card slot max 128 GB

● Motion detection Recording ● Infrared Night Vision

● Motion detection alarm push notication ● White light illumination at motion detection

● Tuya Smart iOS & Android App ● Video streaming

● Two way audio communication ● Remote camera movement: pan & tilt

● Remote audio monitoring ● Cloud storage ( optional for monthly fee)

2. CAMERA INSTALLATION

Important conditions:

- Connect camera to a 230V power supply , using power adapter from package;

- First configuration of camera should be made with camera close to the Internet source / Router device;

- If you need local recording, install a maximum 120 GB TF microSD card ( sold separately) in camera, by

removing back panel ( one screw).

Search for “Tuya Smart” app for iOS/Android Smartphones in App Store/Google Play store, or

scan the below QR code to download and install dedicated app:

3. REGISTER / LOG IN WITH EXISTING ACCOUNT

3.1 Register

If you don not have a Tuya App account yet, you can register an account or log in via personal e-mail

or personal phone number using a verication code procedure. Please read and follow next steps for the

description of registration process:

3.2 Register

If you have already registered an account, you can skip the creating a new account,click “Log in with

existing account”, enter the log in page.

(1) The system automatically select the current Country/Region, or you can manually select the Country/

Region.

(2) Enter your registered e-mail address or mobile number enter your password to log in the system.

If your phone has installed WeChat App or QQ App, click WeChat/QQ icon in the log in with social media

acount area. After accessing the authorization page, and lled in received code from your e-mail/phone log in

the system.

4. ADD DEVICE

4.1 QR code net-pairing (Recommended)

The product only support 2.4GHz Wi-Fi network. It does not support 5GHz Wi-Fi network. Before

conguring Wi-Fi, please set the router parameters. The Wi-Fi password should not contain special

characters of ~!@#$%^&*(). When conguring Wi-Fi, make sure your router, mobile and device are as close

as possible for a quick conguration of the device.

Connect smartphone to this Wi-Fi router with internet access. Activate location from phone if needed.

● App supports QR code net-pairing and Wi-Fi connection. You can choose to add device by other options.

● Power On the camera, and you can hear the broadcast “Wait for WiFi cong”, (if you heard nothing at all,

please click and hold “reset” button for 20 seconds to restore factory settings).

● When the mobile phone connecting to Wi-Fi, click “Add Device” or “+“ icon (gure 1) on the Home screen

of the App, select “Security & Sensor”(gure 2)→ “Smart Camera”, click “next step” (gure 3).

Enter Wi-Fi account and password, click “Conrm” (gure 4).

Figure 1 Figure 2

Figure 3 Figure 4

● Hold the mobile phone screen in the front of the camera (gure 5), the distance between the two should be

15 to 20 cm. (gure 6) Try not to shake the mobile phone during the scanning.

Figure 5 Figure 6

● When you hear “Connect Router”, click “Connect Internet”, and wait for connecting (gure 7).

● Device added successfully (gure 8), you can choose the device name and room scene.

Figure 7 Figure 8

4.2 QR WIFI Fast Connection Distribution Network can be connected according to the

above steps, skipping Fig. 5 and Fig. 6.

5. FUNCTION DESCRIPTION

Real-time preview interface

1. Setting & Management 2. Wi-Fi signal strength

3. Sound switch 4. SD/HD

5. Full screen 6. Screenshot

7. Voice chat 8. Record live view

9. Playback of video

10. PTZ control (The camera can be arbitrarily rotated to give you a different perspective. You can move it up

and down, capture any corner you want to view)

11. Motion detection alarm (abnormal report notication through intelligent detection of anomaly in home. You

can go out to work and play condently. To set the alarm level according to the camera’s led of view can

make the alarm more accurate)

6. CLICK “ 1 “ IN THE UPPER RIGHT CORNER OF THE CONTROL PAGE FOR THE MANAGEMENT

AND SETTING OF THE DEVICE.

● Device Name - can modify the device name and device location;

● Device Information - to view: Device ID, Wi-Fi signal strength, IP address, Mac address, Device time zone.

● Tap-to-Run and Automation - View automations and scenaries created for this device

● Third Party Supported - Compatible smart services

● Basic Settings - Basic settings of camera

● IR Night Vision - Settings for IR function

● Detection Alarm Settings - can set the motion detection switch, motion detection alarm sensitivity and

motion tracking function

● Storage settings - Shows microSD card informations, and settings for Local Recording mode.

● VAS - Value-added service : you can purchase separately video cloud storage service for this camera for

monthly fee (optional according to customer needs)

● Offline Notification - Activates an alarm is camera goes Offline

● Share Device - can share this device to other people, enter the people’s e-mail or mobile phone number;

(Note: the entered e-mail / mobile phone number should be registered with a Tuya App account).

● FAQ & Feedback - Questions and solutions for any problems with product behaviour.

● Firmware Information - Support OTA Remote Upgrade (Do not disconnect during upgrading).

7. CLICK “ME” ON THE HOME SCREEEN OF TUYA APP FOR MORE SERVICES

1. Home Management

2. Message Center

3. FAQ & Feedback

4. More Services

- Free Services: IFTTT , Google Assistant, Alexa, etc;

- Value-added Services : you can check the purchasing record of purchased value-added services: Cloud

Storage for Cameras, AI Filtered Notications etc;

5. Settings and informations for your Tuya app account: Sound, Notications, Network, Cache

8. FREQUENTLY ASKED QUESTIONS

Q:Fail to add device during net-pairing?

A:Please make sure the mobile phone and device are connected to 2.4GHz router. Make sure the correct

Wi-Fi password is entered.

Q:Still fail to add device after re-scanning?

A:If fail to add device, it is recommended to restart the device or power off the device, and try again.

Q: The device cannot preview?

A:Check for weak Wi-Fi signal. You can place the camera closer to the router. If it still doesn’t work, reset the

device, and add it again.

Q:Why the device is still on the list after resetting the device?

A:The device resetting only resets the camera’s network conguration and cannot change the conguration

on the App. You must log in the App to delete the camera from the list.

Q:How to connect the camera to another router?

A:First log in the App to delete and reset the device, and congure the device again through the App.

Q:Why the device cannot identify SD card?

A:It is recommended to insert and remove the SD card after power off the device. Check if the SD card is

under normal service conditions and the format is FAT32. The App shall suggest “”could not nd SD card””

under unstable network of the mobile phone or the device.

Q:The device is online and has an alarm event, but the mobile phone cannot receive the information?

A:First conrm that App allows notication in the settings of your mobile phone.

Under normal circumstances, when an anomaly is detected, a message will appear in the notication bar of

your mobile phone. Your should set a notication sound or vibration in your mobile phone.

In addition, when viewing real-time video in the App you cannot receive alarm from the camera being viewed.

Because the device default function the camera being viewed indicating that the user is focusing on the

monitoring video, and there is no need for an alarm.

Using the advanced intelligent alarm push algorithm to ensure that the alarm message will not be frequently,

but the camera will record all the alarm messages and videos.

9. PRODUCT SPECIFICATIONS

system

Main Processor GK7102

image sensor GC2033

Operation System Embedded LINUX OS system

Application TUYA Smart / Smart Life

Video

High Denition 1080P

Video Compression Smart H.264+

Rotation angle Horizontal:355° ; vertical: 90°

Object tracking Support

low illumination 0.1LUX/F1.2

picture Capture Support

Video Flip Support

Lens

Illumination

Camera lens 3.6MM xed lens

Lamp board 8 pcs (4pcs IR+4pcs White led)

Audio Coding standard G.711

Two-way Speech Support

Record

management

Video le size 2.5GB-4.5GB/Day

Record Mode Manual record, motion detection record, scheduled record, alarm

record

Video storage TF Card/Cloud

playback, back up Support

Alarm trigger Alarm recording, screen shot capture

Network

Network Interface 1*RJ45 , 10/100M10-100 Base-T, self-adaptable Ethernet port

WIFI 802.11b/g/n

Bitstream Three Stream

Network Protocol Support TCP/IP, RTSP, ONVIF, etc

transmission mode P2P, Smart Cloud Sever

WIFI connection Sweep QR code, Network Cable connection, AP Hotspot Addition

extend

TF Card Maximum support 128GB TF card

Reset key Support

power supply Power DC 12V 2A

Power consumption 12W

work environment

Weather proof protection degree IP66

Installation mode Vertical at wall installation

Working Temperature -20˚C ~+60˚C

Working humidity 10% - 90%

General Material ABS for outdoor use

Product weight 513 g

1. DESPRE CAMERA PNI IP230T 1080P

Introducere si functii principale:

Produsul Camera PNI IP230T este o camera IP de 2MP destinata supravegherii si monitorizarii video/

audio de la distanta a locatiilor dorite. Camera se conecteaza la internet prin cablu sau wireless pentru a

transmite imagini video in timp real catre aplicatia dedicata de pe smartphone-ul dvs. oricand si oriunde.

Poate salva videoclipuri local pe cardul microSD sau pe alte dispozitive compatibile cum ar  NVR-urile PNI.

Camera este echipata de asemenea cu functiile de urmarire a miscarii, lumina alba la detectarea miscarii,

alarma la detectie miscare si noticari pe smartphone.

● Inregistrare HD ● conexiune WiFi / cablu

● Inregistrare programata ● slot pentru card microSD TF max 128 GB

● Inregistrare la detectie miscare ● Vizualizare de noapte in infrarosu IR

● Noticari la alarma de detectie miscare ● Iluminare cu lumina alba noaptea la miscare

● Aplicatie dedicata Tuya Smart iOS si Android ● Transmitere video stream

● Comunicare audio bidirectionala ● Miscarea camerei la distanta: pan & tilt

● Monitorizare audio de la distanta ● stocare in cloud (optional pentru taxa lunara)

2. INSTALAREA CAMEREI

Conditii importante:

- Conectati camera la o sursa de alimentare de 230 V, folosind adaptorul din pachet;

- Prima configurare trebuie facuta in apropierea sursei de internet / router wireless;

- Daca aveti nevoie de inregistrari locale, instalati in camera un card TF microSD de maxim 120 GB (nu este

inclus ) indepartand panoul din spate (se desurubeaza un surub).

Cautati aplicatia „Tuya Smart” pentru smartphone iOS / Android in App Store / Google Play Store

sau scanati codul QR de mai jos pentru a descarca si instala aplicatia dedicata:

3. INREGISTRARE / CONECTATI-VA CU UN CONT EXISTENT

3.1 Inregistrare

Daca nu aveti inca un cont in aplicatia Tuya, puteti sa va inregistrati/creati un cont sau sa va autenticati

prin e-mail personal sau prin numarul de telefon personal, folosind o procedura cu cod de vericare. Cititi si

urmati pasii urmatori in care este descris procesul de inregistrare:

3.2 Inregistrare

Daca aveti deja un cont in aplicatia Tuya, puteti sari peste crearea unui cont nou si faceti clic pe „Log in

with existing account” pentru a accesa pagina de autenticare.

(1) Sistemul selecteaza automat Tara / Regiunea curenta sau puteti selecta manual Tara / Regiunea.

(2) Introduceti adresa dvs. de e-mail inregistrata sau numarul mobil si o parola pentru a va autentica in

sistem.

Daca telefonul dvs. are instalata aplicatia WeChat sau QQ App, faceti clic pe pictograma WeChat / QQ in

zona de logare cu un cont de social media. Dupa ce ati accesat pagina de autorizare si ati completat codul

primit pe e-mail / telefon puteti sa accesati contul dumneavoastra.

4. ADAUGARE DISPOZITIV

4.1 Procedura scanare QR-CODE (Recomandat)

Produsul accepta doar retele Wi-Fi de 2,4 GHz. Nu suporta retele Wi-Fi de 5 GHz. Inainte de a congura

camera cu Wi-Fi, va rugam sa setati/vericati parametrii routerului. Parola Wi-Fi nu trebuie sa contina

caractere speciale de tipul: ~! @ # $% ^ & * (). Cand congurati conexiunea Wi-Fi, asigurati-va ca routerul,

telefonul mobil si camera sunt cat mai aproape posibil pentru o congurare rapida a dispozitivelor.

Conectati smartphone-ul la routerul Wi-Fi cu acces la internet. Activati locatia de la telefon, daca functia

este disponibila.

● Aplicatia accepta configurare prin scanare cod QR sau configurare Wi-Fi. Puteti alege sa adaugati

dispozitivul si prin alte optiuni.

● Porniti camera si in cateva clipe veti auzi mesajul „Wait for WiFi config” (daca nu auziti nici un mesaj va

rugam sa apasati si sa mentineti apasat butonul „reset” timp de 20 de secunde pentru a restabili camera la

setarile din fabrica).

● Cu telefonul mobil conectat la Wi-Fi, porniti aplicatia Tuya si faceti clic pe „Adaugati dispozitiv” sau

pictograma „+” (figura 1) pe ecranul principal al aplicatiei, selectati „Security & sensors” (figura 2) → „Smart

Camera”, faceti clic pe „Next step” (figura 3).

Vericati Numele retelei WiFi si introduceti parola Wi-Fi, faceti clic pe „Conrmare” (gura 4).

Figura 1 Figura 2

Figura 3 Figura 4

● Tineti ecranul telefonului mobil in fata camerei (gura 5); distanta dintre cele doua ar trebui sa e intre 15 si

20 cm. (gura 6) Incercati sa nu miscati telefonul mobil in timpul scanarii.

Figure 5 Figure 6

● Cand auziti „Connect Router”, faceti clic pe „Am auzit sunetul” si asteptati conectarea (gura 7).

● Dispozitiv adaugat cu succes (gura 8) si puteti alege numele dispozitivului si numele camerei/locatiei.

Figura 7 Figura 8

4.2 Alte metode de conectare (daca sunt disponibile) pot  similare pasilor de mai sus, exceptand

Fig. 5 si Fig. 6.

5. DESCRIERE FUNCTII

Interfata de vizualizare in timp real

1. Setare si informatii 2. Putere semnal Wi-Fi

3. Activare difuzor 4. Rezolutie SD / HD

5. Ecran complet 6. Captura de ecran

7. Activare microfon 8. Inregistrare video live pe telefon

9. Redare inregistrari

10. Control Miscare/Directie (Camera poate  rotita in mod arbitrar pentru a va oferi o perspectiva diferita.

Puteti sa o mutati in sus si in jos ca sa capturati orice colt pe care doriti sa il vizualizati)

11. Alarma la detectie miscare (declanseaza o noticare prin detectarea inteligenta a miscarii. Puteti pleca

la munca, iesi in oras sau pleca de acasa oricand cu incredere. Puteti seta nivelul de alarma in functie de

imaginea inregistrata de camera pentru a face alarma mai precisa).

6. FACETI CLIC PE „1” IN COLTUL DIN DREAPTA SUS AL APLICATIEI PENTRU GESTIONAREA SI

SETAREA DISPOZITIVULUI.

● Device Name - poate modica numele dispozitivului si locatia dispozitivului;

● Device Information - pentru a vizualiza: ID dispozitiv, nivel semnal Wi-Fi, adresa IP, adresa MAC, fus orar.

● Tap-to-Run and Automation - Vizualizati automatizari si scenarii create pentru acest dispozitiv

● Third Party Supported - Servicii inteligente compatibile

● Basic Settings - Setari de baza ale camerei

● IR Night Vision - Setari pentru functia IR

● Detection Alarm Settings - puteti activa functia de detectie a miscarii, sensibilitatea detectiei si functia de

urmarire a miscarii

● Storage settings - Prezinta informatii despre cardul microSD si setari pentru modul de inregistrare locala.

● VAS - Serviciu cu valoare adaugata: puteti achizitiona separat serviciul de stocare video in cloud pentru

aceasta camera contra unei taxe lunare (optional si contracost in functie de nevoile clientilor)

● Offline Notification - Activeaza o alarma/notificare daca camera se deconecteaza

● Share Device - puteti partaja acest dispozitiv cu alte persoane; introduceti adresa de e-mail sau numarul

de telefon al persoanei; (Nota: adresa de e-mail / numarul de telefon introdus trebuie sa fie inregistrat cu un

cont Tuya App).

● FAQ & Feedback - Intrebari si solutii pentru orice situatie despre comportamentul produsului.

● Firmware Information - Asistenta actualizare firmware - OTA Remote Upgrade (Nu deconectati camera de

la curent si nu va deconectati de la camera in timpul actualizarii).

7. FACETI CLIC PE „ME” PE ECRANUL PRINCIPAL AL APLICATIEI TUYA PENTRU MAI MULTE

SERVICII

1. Home Management - Management familii

2. Message Center - Centru de mesaje si noticari

3. FAQ & Feedback - Intrebari si Raspunsuri

4. More Services - Alte servicii

- Free Services ( Servicii gratuite): IFTTT , Google Assistant, Alexa, etc;

- Value-added Services :puteti verica posibilitatea achizitiei de serviciilor cu valoare adaugata (contracost):

stocare in cloud, noticari ltrate inteligent AI etc;

5. Setari si informatii pentru contul dvs. in aplicatia Tuya: Sound, Notications, Network, Cache

8. INTREBARI FRECVENTE

I: Nu ati reusit adaugarea dispozitivului in timpul procedurii de imperechere ?

R: Va rugam sa va asigurati ca telefonul mobil si dispozitivul sunt conectate la routerul de 2,4 GHz. Asigurati-

va ca parola Wi-Fi este introdusa corect.

I: Nu reusiti sa adaugati dispozitivul dupa re-scanare cod QR?

R: Daca nu reusiti adaugarea, se recomanda sa reporniti dispozitivul sau sa il resetati si sa incercati din nou.

I: Dispozitivul nu poate asa imagini video?

R: Vericati daca exista semnal Wi-Fi sau daca are un nivel scazut. Puteti testa nivelul de semnal aducand

camera mai aproape de router. Daca inca nu functioneaza, resetati dispozitivul si adaugati-l din nou.

I: De ce dispozitivul este inca pe lista dupa resetarea dispozitivului?

R: Resetarea dispozitivului reseteaza doar setarile de retea ale camerei si nu poate modica conguratia din

aplicatia de mobil. Trebuie sa va conectati la aplicatie pentru a sterge camera din lista.

I: Cum conectati camera la un alt router?

R: Mai intai conectati-va la aplicatie pentru a sterge si reseta dispozitivul, resetati si camera si apoi

congurati-le din nou de la zero prin intermediul aplicatiei.

I: De ce camera nu recunoaste cardul microSD?

R: Se recomanda introducerea si scoaterea cardului microSD doar dupa oprirea dispozitivului. Vericati apoi

functionalitatea cardului intr-un PC/Laptop si daca formatul este FAT32. Aplicatia poate asa eroarea „nu a

putut gasi cardul SD” in caz de conexiune slaba a telefonului mobil sau chiar a camerei.

I: Dispozitivul este online si are un eveniment de tip alarma, dar telefonul mobil nu aseaza noticarea?

R: Mai intai, conrmati ca aplicatia are toate permisiunile de noticari activate in setarile telefonului mobil.

In circumstante normale, cand este declansata o alarma, un mesaj va aparea in bara de noticari a

telefonului mobil. Ar trebui sa setati un sunet sau o vibratie la noticare in telefonul dvs. mobil.

Atentie atunci cand vizionati video in timp real in aplicatie, nu veti primi alarme de la camera video

deoarece functia implicita a dispozitivului este vizualizarea camerei moment in care se considera ca

utilizatorul urmareste deja imaginile live, si nu mai sunt necesare noticari.

Datorita algoritmului avansat inteligent de trimitere a noticarilor veti primi mai putine mesajele de alarma,

desi camera va inregistra toate mesajele si pozele de alarma.

9. SPECIFICATII

Sistem

Procesor GK7102

Senzor de imagine GC2033

Sistem de operare Sistem incorporat LINUX OS

Aplicatii TUYA Smart / Smart Life

Video

Rezolutie 1080P 2MP

Compresie video Smart H.264+

Unghi rotatie Orizontal:355° ; vertical: 90°

Urmarirea obiectelor/miscarii Da

Iluminare redusa 0.1LUX/F1.2

Captura imagine Da

Imagine rasturnata Da

Lentile

Iluminare

Obiectiv 3.6MM lentina xa

Leduri 8 bucati (4bc IR+4bc led alb)

Audio Standard de compresie G.711

Comunicare bidirectionala Da

Management

inregistrare

Dimensiune sier video 2.5GB-4.5GB / Zi

Mod de inregistrare Inregistrare manuala, Inregistrare la detectie miscare/alarma,

Inregistrare programata

Stocare video TF Card / Cloud(contracost)

Redare, copie de rezerva Da

Declansare alarma Inregistrare la alarma,Captura ecran

Retea

Interfata retea 1*RJ45 , 10/100M10-100 Base-T, self-adaptable Ethernet port

WiFi 802.11b/g/n

Numar maxim de piste video 3 piste video ( stream)

Protocoale de retea Support TCP/IP, RTSP, ONVIF, etc

Mod de conectare/transmisie P2P, Smart Cloud Server(contracost)

Conexiune WiFi Adaugare cod QR, conexiunea prin cablu de retea

Auxiliar

Slot card Card TF microSD maxim 128GB ( nu este inclus )

Resetare cheie Da

Alimentare Parametri alimentator DC 12V 2A

Consum de energie 12W

Conditii de utilizare

Grad de protectie impotriva

intemperiilor

IP66

Mod de instalare Vertical pe perete

Temperatura de lucru -20˚C ~+60˚C

Umiditate admisa 10% - 90%

General Material ABS pentru exterior

Greutate produsului 513 g

BG:

Опростена декларация за съответствие на ЕС

SC ONLINESHOP SRL декларира, че Камера за наблюдение PNI IP230T 1080P спазва директивата EMC

2014/30/EU, директивата ROHS 2011/65/EU и RED 2014/53/UE. Пълният текст на ЕС декларацията за

съответствие е достъпен на следния интернет адрес: