Polanik CS-241 User manual

TECHNICAL SPECIFICATION / INSTRUCTION MANUAL
Chalk stand CS-241
I. G n ral d scription
CS-241 is designed for storing chalk during athletics competitions or other competitions and training, when
competitors should have the access to chalk.
II. T chnical data
Cod CS-241
Contain r made of fibreglass, closable
Pol steel, powder painted
Bas steel, powder painted
N t w ight [kg] ~12

Technical specification Instruction manual CS-241 2/3
imensions [mm]

Technical specification Instruction manual CS-241 3/3
III. Ass mbly
The product is delivered in parts. To assemble the stand: screw the fibreglass container and the steel base to the steel
pole. Metric wrench no. 13, hex key no. 5 and no. 6 are used to assemble the stand.
IV. Op ration and maint nanc
Place the stand to a roofed place after every training and competition. Clean using a moist cloth with addition of a
delicate detergent. ry it with a soft cloth.
V. Packing and transport
The pole is wrapped with foil. The container and the base are packed into a cardboard box (dim. 450 x 450 x 250
[mm]).
Even the best technical solutions cannot substitute for common sense. The usage of the product must take place under the supervision of qualified
coaches. The producer shall not be liable for any incidents caused by the improper assembly or its misuse. The producer reserves the right to
introduce without warning changes in product constructions and colours.
PRO UCT SUPPORT: Paweł Ciechanowski [e-mail]
File: 2014-07-21 © 20124Polanik