POLTI VAPORETTO 1030 User manual

®
R

Vtt 1030 No-Volt - Cod. M0S05358 - Edizione 1H02
2
5
4
6
1
3
2A
RS
T
5
6
4
11
11
9
11 22
2244 44
22
2233 33
22
2222 22
22
2211 11
QQ
QQ
11
1188 88
11
1166 66
20
11
17
19
1116
15
13
12
11
119
108
9
117
E
I
B
D
C
G
F
A
H
14

ENGLISH Vaporetto 1030 NV
13) Cotton cloths
14) Filler funnel
15) Spare washers for accessory
connections
18) Window squeegee tool
19) Small blade for window tool
20) Large blade for window tool
ACCESSORIES SOLD SEPARATELY
Q) Iron
R) Steam request button
S) Temperature regulation control
T) Iron rest
16) 120° nozzle
17) Small round brush for 120° nozzle
21) High pressure lance
22) Triangular brush
23) Large round brush for 120° nozzle
24) Wallpaper stripper tool
GENERATOR
A) Patented Safety Cap
B) Main Generator on/off switch
C) Accessory on/off switch
D) Central connector block
with splash proof cover
E) Lock-in aperture for central connector
F) Power supply cable
G) Carrying handle
H) Rotating wheel
I) Steam regulation control
ACCESSORIES
1) Flexible hose
2) Steam gun
2A) Safety switch
3) Steam request lever
4) Connector assembly
5) Press down connector button
6) Locking tab
7) Extension tubes
8) Large brush
9) Cloth retaining clips
10) Replaceable bristles plate
11) Accessories locking button
12) Small brush
Polti S.p.A. reserves the right to change
equipment or accessory specification without
prior notice.

Vaporetto 1030 NV ENGLISH
Dear Customer,
Congratulations and thank you for purchasing this Polti product, con-
tributing to the conservation of our most precious natural resource, The Environment.
Vaporetto solves all cleaning and hygiene problems without the use of detergents -
all that’s needed is just normal tap water which our system transforms into steam at
a constant powerful pressure, allowing you to clean more thoroughly and in an
ecological way.
Our Technical Development team have added a range of sophisticated improvements
to make cleaning tasks both safer and more effective:
•The No Volt System - a unique Polti patent, designed so that there is no
electricity to the on/off switch on the handle, making it absolutely safe even if the
handle is accidentally brought into contact with liquids. The No Volt System offers
the additional safety feature of only being able to operate when the user is
present - the steam switches itself off immediately the handgrip is released.
•Splash Proof Design - splash proof design makes Vaporetto proof against the
machine being splashed or sprayed.
•Unique Polti Patented Safety Cap - prevents opening whilst any residual
pressure remains in the system.
• The Capacity Generator - is made of a special aluminium alloy, which guarantees
its long life and prevents limescale build up.
• The steam pressure is controlled by a pressostat and can be varied at will with
fingertip control.
• Vaporetto is equipped with a safety valve, two safety thermostats and an additional
protective thermostat which prevents operation of the machine when it is empty
and which maintains Vaporetto in an absolutely safe condition at all times.
The accessories and all the components are manufactured with highest quality
materials which are resistant to the high temperatures attained in the operation of this
machine.
This unit conforms with EC-directives 89/336 as amended by 93/68 (EMC)
and 73/23 as amended by 93/68 (low voltage).

ENGLISH Vaporetto 1030 NV
FOR YOUR OWN SAFETY READ FOLLOWING INSTRUCTIONS CAREFULLY
BEFORE ATTEMPTING TO CONNECT THIS UNIT TO THE MAINS.
MM
MMAA AAII IINN NNSS SS (( ((AA AACC CC)) )) OO OOPP PPEE EERR RRAA AATT TTII IIOO OONN NN
This unit is designed to operate on 240V, 50 Hz current only. Connecting it to other
power sources may damage the unit.
WARNING - This appliance must be earthed.
This appliance may be fitted with a non rewirable plug, if it is necessary to change the fuse
in a non rewirable plug the fuse cover must be refitted. If the fuse cover is lost or dam-
aged, the plug must not be used until a replacement, available from the appliance manu-
facturer, is obtained. It is important that the colour of the replacement fuse cover corre-
sponds with the colour marking on the base of the plug.
If the plug requires to be changed because it is not suitable for your socket, or becomes
damaged, it should be cut off and an appropriate plug fitted following the wiring instruc-
tion (below). The plug removed must be disposed of safely as insertion into a 13A
socket is likely to cause an electrical hazard.
As the colours of the wires in the mains leads of this appliance may not correspond with
the coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug
which is marked with the letter “E” or by the earth symbol or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with
the letter “N” or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with
the letter “L” or coloured red.
GREEN
&
YELLOW
(Earth)
BLUE
(Neutral)
FUSE
(13 amp)
BROWN
(Live)
IMPORTANT
These wires in this mains lead are coloured in accordance with the following code.
• Green-and-yellow: Earth • Blue: Neutral • Brown: Live

Vaporetto 1030 NV ENGLISH
PP
PPLL LLEE EEAA AASS SSEE EE RR RREE EEAA AADD DD TT TTHH HHEE EE FF FFOO OOLL LLLL LLOO OOWW WWII IINN NNGG GG BB BBEE EEFF FFOO OORR RREE EE UU UUSS SSEE EE
• Before using your VAPORETTO carefully read these usage instructions.
• Before connecting VAPORETTO to the mains make sure that the current is the same as
that indicated for the machine and that the plug is an earthed plug.
• Do not introduce any detergent or chemical substance into the generator tank.
Do not put any detergent or chemical substance in the tank.
Water by its nature contains magnesium, mineral salts and other deposits which in hard
water areas can contribute to limescale build up in the tank. To avoid these problems, it
is necessary to swill out with tapwater and empty the generator tank after every 3 or 4
uses. In very hard water areas we recommend the use of our KALSTOP FP 2003, a
special natural-base decalcifier which inhibits and breaks down limescale, making it easy
to remove just by swilling out the tank with a little tapwater. This is a preventive against
scale build-up and protects the metal walls of the steam generator tank. KALSTOP is
available from Polti dealers or by mail-order from your Polti Service Centre.
Do not use in any event distilled water or descaler.
• Do not refill the tank while it is still hot, allow it to cool down for a few minutes before
refilling.
• During filling and refilling we recommend you disconnect the machine from the mains
supply.
• Never empty VAPORETTO when the water inside the generator tank is still hot.
• Do not place the appliance or any of the tools whilst connected in water or in any
other liquids.
• Do not touch the appliance with wet hands and feet whilst the appliance is connected
to the mains.
• Never leave the appliance unattended whilst it is connected to the mains.
• Do not allow VAPORETTO to be used by children or by people who are not familiar with
the usage instructions.
• When REfilling the generator tank, use HOT rather than cold water, pour in gently at first
and keep your face away. Otherwise the still hot tank walls can spit drops of very hot
water or steam spray.
• When cleaning ovens, refrigerators and other electrical appliances, ALWAYS clean with
the electricity supply switched off to the appliance you are cleaning, and make sure you
keep the steam well away from the parts which will be live when the appliance is re-con-
nected.
• Do not leave the appliance exposed to wind or rain.
• Do not lay the hot appliance on surfaces sensitive to heat.
• Do not use electric extension leads that are not authorized by the manufacturer, as they
may cause damage or fire.
• In case of breakdown or malfunction switch off the appliance and never attempt to
disassemble it, but refer to an authorized service center.
• In case of accidental fall of the appliance it is necessary to have it checked
by an authorized service center as the internal safety features may have
been affected.
• Never direct the jet of steam towards small particles of debris without first
protecting the user’s eyes.
• Do not direct the steam jet at people or animals.
Danger of burns!
• Never place your hands inside the jet of steam.
Danger of burns!
• We recommend that the appliance is disconnected from the
mains whenever it is not in use.

ENGLISH Vaporetto 1030 NV
CC
CCOO OORR RRRR RREE EECC CCTT TTUU UUSS SSEE EEOO OOFF FFTT TTHH HHEE EEPP PPRR RROO OODD DDUU UUCC CCTT TT
This appliance is intended for use as a steam generator as described and in accordance
with the instructions provided in this manual. Please read these instructions carefully and
keep them, as you may find them useful in future.
II
IIMM MMPP PPOO OORR RRTT TTAA AANN NNTT TT
Before leaving our factory all our products are
rigorously tested. However, your VAPORETTO may
contain some residual water in the boiler.
SS
SSEE EETT TT UU UUPP PP
Before using VAPORETTO for the first time assemble the
pivoting wheels as indicated in the diagram.
PP
PPRR RREE EEPP PPAA AARR RRAA AATT TTII IIOO OONN NN FF FFOO OORR RR UU UUSS SSEE EE
1. Unscrew the patented safety cap (A) and fill the
generator with 1.3 litres of water, using the filler funnel
(14) (Fig. 1).
Normal tapwater can be used. However, as hard water
by its nature contains limestone, which may cause a
build-up of limescale in the tank, in hard water areas we
recommend the use of our natural-base decalcifier
KALSTOP FP 2003.
2. Carefully screw on the safety cap to hand tight (Fig. 2).
3. Connect the power supply cable (F) into an earthed
power supply of the correct voltage.
II
IINN NNSS SSTT TTRR RRUU UUCC CCTT TTII IIOO OONN NNSS SS FF FFOO OORR RR UU UUSS SSEE EE
1a. Press down the generator on/off switch (B) and the
accessories on/off switch (C).
2a. Open the cover of the central connector block (D) and
insert the central connector (4) pressing the connector
button (5) and taking care that the locking tab (6) is
correctly positioned in the lock-in aperture (E) on the
block (Fig. 3).
3a. Wait for the pressure warning light (K) (where available)
to go out. (Note: on some models where there is no
separate pressure indicator light, instead wait for the
light inside the generator on/off switch to go out).
VAPORETTO is now ready for use.
Fig. 1
Fig. 2
Fig. 3
➠
➠
➠

Vaporetto 1030 NV ENGLISH
4a. The steam gun (2) is equipped with a safety switch (2A)
which prevents the accidental start of the steam jet by
children or people who do not know how to operate the
appliance. With the switch 2A in the “OFF” position, the
lever controlling the steam jet is locked. Should the
hose be left unattended for a moment whilst the appli-
ance is connected to the mains, it is recommended to
put the safety switch in the “OFF” position.
To start the steam jet, move the 2A switch backwards
(ON) and activate the steam request lever (Fig. 4).
The first burst of steam may contain some water droplets, due to imperfect thermic
stabilisation inside the flexible hose. We would therefore advise that the first jet of
steam is played onto an old cloth until a constant pressure of steam is obtained.
Note: The on/off switch (B) may go on and off from time to time during use of
VAPORETTO. This indicates the machine maintaining the correct and constant pressure
and is quite normal.
SS
SSTT TTEE EEAA AAMM MM RR RREE EEGG GGUU UULL LLAA AATT TTII IIOO OONN NN FF FFEE EEAA AATT TTUU UURR RREE EE
Some VAPORETTO models come equipped with a steam reg-
ulator control (I) (Fig. 5). You can use this control to increase
the steam flow by turning in an anti-clockwise direction.
Turning the control in a clockwise direction reduces the
steam flow. Here are some suggestions for the choice of
steam flow level:
Strong steam: For encrusted dirt, stains, sanitising, grease
Normal steam: For carpets, rugs, glass, tiles etc.
Delicate steam: For vaporising plants and cleaning delicate
fabrics, upholstery, wallpaper etc. Please read separate
warning about use on draylon, velvet and other delicate
fabrics, or on sensitive wood surfaces.
CC
CCOO OONN NNNN NNEE EECC CCTT TTII IIOO OONN NN OO OOFF FF AA AACC CCCC CCEE EESS SSSS SSOO OORR RRII IIEE EESS SS
To connect the accessories tools to the hand gun proceed
as follows (Fig. 6)
1c. Move the connector button (11) on the accessory to the
“open” position.
2c. Attach the required tool to the hand gun.
3c. Move the connector button (11) back to the position
“closed”.
4c. Check that the connector button has engaged and the
accessory is fully connected.
Fig. 5
+–
Fig. 4
➠
OFF ON
Fig. 6
➠
➠
➠

ENGLISH Vaporetto 1030 NV
PP
PPAA AATT TTEE EENN NNTT TTEE EEDD DD SS SSAA AAFF FFEE EETT TTYY YY CC CCAA AAPP PP // // ’’ ’’WW WWAA AATT TTEE EERR RR OO OOUU UUTT TT’’ ’’
All POLTI machines are equipped with the unique Polti patented safety cap, which prevents
opening of the generator tank as long as there is any pressure remaining inside the tank.
This is an important and indispensable safety device, and it is necessary to follow certain
procedures when re-filling the tank.
According to model, ‘water out’ is indicated by a warning light (J), or by an audible alarm
signal from the machine, or on more basic models by the exhaustion of the steam output.
Whenever you have used up all the water in the tank, follow the following procedures:
1b. Switch off the machine at the generator on/off switch (B)
2b. Press the steam request lever (3) on the hand gun (2) or, if using the iron, the steam
request button (R) on the iron (Q) so as to fully exhaust the steam supply from the tank.
3b. Disconnect the power supply cable (F) from the mains.
4b. Unscrew anti-clockwise the patented safety cap (A)
5b. Wait for a few minutes to allow the generator tank to cool down.
6b. When cool proceed to carefully refill the tank as described in paragraph 1 of the
section “Preparation for Use” in the instructions. If refilling the generator when not
completely cooled, we recommend that you carefully pour only very small quantities
of water at each pouring into the tank, so as to avoid spitting from the tank and
cover exposed skin whilst filling.
UU
UUSS SSEE EE OO OOFF FF TT TTHH HHEE EE PP PPRR RROO OOFF FFEE EESS SSSS SSII IIOO OONN NNAA AALL LL SS SSTT TTRR RREE EENN NNGG GGTT TTHH HH PP PPRR RREE EESS SSSS SSII IINN NNGG GG II IIRR RROO OONN NN
(normally sold separately)
1d. Connect the connector block at the end of the iron hose (4) to the generator as shown
in point 2a of the section “Instruction for Use”.
2d. For all steam ironing, position the temperature indicator dial (F) to the position
“COTONE - LINO”. For dry ironing set the temperature control dial according to the
fabric to be ironed as indicated on the dial.
3d. Wait for a few minutes for the indicator (R) to go out indicating that the sole plate of
the iron has reached the correct temperature.
4d. Press the steam request button on the iron (R) to allow the steam to exit. Releasing
this button stops the steam flow. At first you may find that the steam contains some
water globules and we recommend that the first jet of steam is therefore played onto
an old cloth, and is not directed onto the garment to be ironed.
For dry ironing do not press the steam request button (R).
5d. The iron can also be used in a vertical position e.g. for removing creases from
curtain, clothing etc.
IMPORTANT
• Do not leave the iron unattended whilst connected to the mains.
• Iron only on heat resistant surfaces and on surfaces that allow the steam to escape
e.g. mesh ironing boards.
• ATTENTION: if you iron sitting down, do not place your legs under the ironing board,
the steam can cause burns.

Vaporetto 1030 NV ENGLISH
CC
CCAA AAUU UUTT TTII IIOO OONN NNSS SS
• For cleaning leather, wood or delicate fabrics especially dralon, velvet and other pile
surfaces, consult the manufacturers instructions. Clean only by using the hand gun at
a safe distance together with a soft cloth and always do a test on a non visible part of
the item first or on a sample. Allow the test area to dry completely before observing
results and effects on surface or colour before proceeding to clean further areas, ensur-
ing that exactly the same distance and technique are applied as for the test area. If in
doubt, and on sensitive surfaces like fabrics, leather and wood it is always better to
ask advice from your Steam Cleaner dealer.
• For cleaning wood surfaces (furniture, doors etc.) take great care as a too long
application of the steam could alter the waxed appearance, the shine or the colour of
the surfaces cleaned. We therefore recommend you apply the steam on such surfaces
only for brief periods or to clean these surfaces using a cloth first held in the steam.
• Please pay particular attention while cleaning brick floors: a too long application of
steam could damage wax, brightness or colour of these surfaces.
• Delicate surfaces (e.g. synthetic materials, lacquered surfaces etc.) we recommend
that the small brush should always be covered with a one cloth to reduce the intensi-
ty of the steam, and (on machines with steam variation control) with the steam set at
low level.
• If cleaning glass surfaces in particularly low temperatures preheat the glass using the
hand gun from about 50 centimetres distance from the surface to be cleaned.
• For care of your plants vaporise at a minimum distance of 50 centimetres.
TT
TTII IIPP PPSS SS FF FFOO OORR RR BB BBEE EETT TTTT TTEE EERR RR UU UUNN NNII IITT TT PP PPEE EERR RRFF FFOO OORR RRMM MMAA AANN NNCC CCEE EE
STEAM GUN (2)
The steam gun can be used directly on all spots requiring a stronger, closer treatment
without connecting the brushes. The more resistant the stain, the closer you should hold
the gun; the steam pressure and temperature being higher at the source. You should
however always wipe with a dry cloth (or a slightly abrasive sponge-if the spot is a
difficult one to remove) after using the gun.
The steam gun is particularly efficient at:
- breaking down rug and carpet stains before they are treated with the large brush;
- cleaning stainless steel surfaces, panes, mirrors, enamelled surfaces;
- cleaning hard-to-reach corners, such as stairs, window sills, door posts;
- cleaning window shutters, heaters, car interiors;
- spraying plants (from a distance);
- removing odours and creases from clothes.
To reach higher points, the steam gun can be connected to one or both extension tubes.

ENGLISH Vaporetto 1030 NV
LARGE BRUSH (8)
Use the large brush (8) with one or two extension tubes (7) on all large washable surfaces.
To wash floors, put a clean, dry kitchen cloth under the brush and swing back and forth
without applying any pressure. Use the other side of the cloth when the first one is impreg-
nated with dirt. Use the brush directly without the cloth on particularly dirty or incrusted areas
and in spaces between the tiles: swing the brush sideways to detach the dirt. Highly obsti-
nate stains may require a steam gun treatment before the brush and cloth are used (an old
bath towel is an ideal cloth) . The same procedures apply to ceilings and vertical surfaces,
like wallpaper: in this case the cloth can easily be fastened around the brush and held in
place by the 4 clips (9) on the brush itself. Smooth cotton cloths are suitable for the treat-
ment of glass surfaces: fasten the cloth around the brush then pass it over the window pane
(or mirror) to remove the greasy film. Finally, spray the surface with the steam gun and wipe
dry with a clean cloth. In cold weather, window panes will require pre-heating with the steam
gun (from a distance of 10/15 cm), prior to the actual cleaning with the brush. Vaporetto
Ecological System is ideal for both synthetic and wool rugs as well as for all types of car-
pets. Its use will ensure total hygiene, revive colours and restore the original brilliance of
the pile. The treatment can be repeated as frequently as you wish, with no damage what-
soever. Drying occurs practically at once. Fold a cotton cloth over 2 or 3 times (accord-
ing to the length and resistance of the pile) and fasten it onto the brush. Move the brush
rapidly in all directions without applying any pressure. You should avoid lingering in the same
place, as this may soak the area. Particularly dirty rugs may need several treatments. Obsti-
nate stains may require the use of the steam gun prior to treatment.
SMALL BRUSH (12)
The small brush is designed to perform the same operation as the large brush, only on small-
er surfaces. It can be connected to the steam gun with one or two extension tubes (7) .
For cleaning furniture spray the steam onto a dry cotton cloth then wipe with the cloth.
The warm moist cloth will pick up dirt and static, so that the furniture remains cleaner
longer thanks to the absence of sticky film from chemical cleaning products.
WINDOW SQUEEGEE TOOL (18,19,20)
The Window Squeegee Tool allows you to clean effectively and rapidly all glass surfaces
without using detergents. Your glass wilI remain cleaner longer thanks to the absence of
layers of film normally left behind by chemical cleaning products on which new dust and
grease can attach itself.
Cleaning glass is done in two stages:
- Spraying the steam onto the surface to be cleaned to loosen the dirt (not touching with
blade).
- Pulling the blade straight down the window surface from top to bottom without
applying the steam, to take away the dirt.
- To clean especially large glass surfaces, attach the Window Squeegee Tool to the
extension tubes.

Vaporetto 1030 NV ENGLISH
CC
CCAA AARR RREE EE OO OOFF FF YY YYOO OOUU UURR RR VV VVAA AAPP PPOO OORR RREE EETT TTTT TTOO OO
• Before attempting any maintenance operation, be sure to always disconnect the
appliance from the mains
• Normal tapwater can be used. However, as hard water by its nature contains limestone,
which may cause a build-up of limescale in the tank, in hard water areas we recom-
mend the use of our natural-base decalcifier KALSTOP FP 2003.
• We recommend that the bristles of the brushes are allowed to cool down in their
normal position after use, so as to avoid any mis-shaping.
•Check periodically the condition of the coloured washer connections on the
the central connector (4). If necessary, replace the washers with the spare
washers supplied (15).
Make the same check also on the connection washers of the extension tubes (7) and
of the steam gun (2).
• To clean the body of the appliance, simply use a moist cloth. Do not use solvents or
detergents which may harm the body material.
WW
WWAA AARR RRNN NNII IINN NNGG GG
•In the case of a breakdown or malfunction do not attempt to repair the
aplliance yourself but refer to your nearest authorised service Centre.
• If repairs or replacement parts are required, use only original Polti replacement parts.
• The appliance is fitted with a safety thermostat, which should only be replaced by an
authorised technician.
• If it is necessary to replace the power supply cable, please refer to the nearest Polti
authorised service centre, since the use of a special tool is necessary.
POLTI DECLINES LIABILITY FOR ANY DAMAGE OR ACCIDENT DERIVED FROM
ANY USE OF VAP0RETTO ECOLOGICAL SYSTEM WHICH IS NOT IN CONFORMI-
TY WITH THE INSTRUCTIONS CONTAINED IN THIS BOOKLET.

ENGLISH Vaporetto 1030 NV
II
IINN NNCC CCRR RREE EEAA AASS SSEE EE TT TTHH HHEE EE VV VVEE EERR RRSS SSAA AATT TTII IILL LLII IITT TTYY YY OO OOFF FF VV VVAA AAPP PPOO OORR RREE EETT TTTT TTOO OO
EE
EEVV VVEE EENN NN FF FFUU UURR RRTT TTHH HHEE EERR RR WW WWII IITT TTHH HH TT TTHH HHEE EE FF FFOO OOLL LLLL LLOO OOWW WWII IINN NNGG GG
OO
OOPP PPTT TTII IIOO OONN NNAA AALL LL AA AADD DDDD DDII IITT TTII IIOO OONN NNAA AALL LL AA AACC CCCC CCEE EESS SSSS SSOO OORR RRII IIEE EESS SS
PROFESSIONAL STRENGTH PRESSING IRON MODEL 1000
Stainless steel soleplate with 11 holes concentrated at the point. Indicator light to
indicate selected temperature has been reached. Heat resistant iron rest.
120° STEAM NOZZLE (16-17)
The 120° nozzle (which can be connected directly to the gun or together with the
extension tubes) allows you to concentrate a powerful jet of steam to otherwise
inaccessible locations, such as radiators, door posts, sills and shutters, as well as for
sterilising toilet bowls.
LONG STEAM LANCE (21) (OPTIONAL)
This accessory allows you to reach the most inaccessible places. Ideal for cleaning large
radiators or shutters etc.
TRIANGULAR BRUSH (22)
A new accessory whose shape allows access into the most difficult corners.
LARGE BRUSH FOR 120° ACCESSORY (23)
A very useful new accessory which allows the 120° steam nozzle to be used for cleaning
larger surfaces.
WALLPAPER STRIPPER TOOL (24)
Specially designed for easy removal of wallpaper without significant wetting.