STEAMONE UNILYS User manual

Thank you for choosing this SteamOne product.
Please read this manual in its entirety before operating this appliance.
EN
Garment steamer
User Guide
UNILYS

Safety Instructions
Unpacking
Before Use
Garment steamer assembly
lling the water tank
Use
Start
proper use
Clothes placement
Accessories
Brush
Mini Pressing Board
Protective glove
After use
Transport
Maintenance
Troubleshooting
Models & Specications
Warranty
TABLE OF CONTENTS
1
4
5
5
6
7
7
8
9
11
11
12
12
13
13
13
15
16
16

1
Safety Instructions
ALWAYS FOLLOW THESE IMPORTANT SAFETY
INSTRUCTIONS BEFORE USING:
This product is listed by CE. Representative samples of this product have
been evaluated by CE and meet applicable safety standards.
Do not use this appliance for purposes other than what it was intended
for.
To reduce the risk of burns from hot water or steam, always hold the
steam head away from your body during operation.
To avoid electric shock, never immerse the appliance in water or any
other liquid.
Always turn the appliance «OFF» before plugging it in to, or removing
it from the outlet. Grasp the plug and pull to remove it from the outlet;
never pull on the cord. Do not operate the appliance if the power cord is
damaged.
Disconnect the appliance from the electrical outlet when lling the water
tank, emptying or when not in use. Fill only the water tank with water; do
not pour directly into the water reservoir.
Never point the steam head at people or animals, or steam the garment
while wearing.
Use caution when using the appliance near children; never leave children
unattended near the appliance.
Let the appliance cool completely before storage and do not allow the
power cord to touch hot surfaces.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
The voltage of your electrical installation must correspond
to that of the appliance. Connecting to the wrong voltage
may cause irreversible damage to the appliance and will
invalidate the guarantee.

2
This appliance can be used by children
aged from 8 years old and above and
persons with reduced physical, sensory
or mental capabilities or lack of experi-
ence and knowledge if they have been
given supervision or instruction concern-
ing use of the appliance in a safe way and
understand the hazards involved.
Children shall not be play with the
appliance.
Cleaning and user maintenance shall not
be made by children without supervision.
See “Maintenance” for user maintenance
instruction.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualied persons in
order to avoid a hazard.
Care should be taken when using the
appliance due to the emission of steam.
Unplug the appliance during lling and
cleaning

3
Do not operate the appliance if it has been dropped or damaged.
To avoid the risk of injury, re or electric shock, do not attempt to disas-
semble or repair the appliance; take it to a qualied service center for
repair.
Use caution when emptying the water tank after use; water in the tank
may be hot. Do not touch metal parts until the unit has cooled to avoid
the risk of burns; use caution when changing attachments, they may be
hot or contain hot water.
Always keep the hose and nozzle elevated above the water tank.
Steam in an up and down vertical motion. Using the steamer in a horizon-
tal position or tilting it back may result in hot water discharge.
Always hang the steam head on the head support/hook. Never place the
steam head on the oor, furniture or lay it on the power cord while it is
hot or plugged in as this may result in re or electric shock.
Never drop or insert objects into the hose or any of the openings.
The use of accessories and attachments other than those provided by
SteamOne is not recommended and may result in re, electric shock or
personal injury.
This unit is for indoor use only.
Do not cut or attempt to extend the steaming hose.
To prevent overheating of the appliance, please be sure that the tele-
scopic rod is extended to its highest position before hanging clothes on
the garment hook for steaming.
Do not allow the steamer to run dry.
To avoid a circuit overload, do not operate another high wattage appliance
on the same circuit.
If necessary, use an extension cord specically designed for appliances,
lesser cords may overheat.
SPECIAL INSTRUCTIONS:
To avoid a circuit overload, do not operate another high wattage appliance
on the same circuit.
If necessary, use an extension cord specically designed for appliances,
lesser cords may overheat.

4
Unpacking
As you unpack your garment steamer, check to make sure that all
items shown below are included.
Accessories
- Your appliance contains materials that can be
recovered or recycled.
- When disposing of it, take it to a recycling center
or approved service center.
SAVE THESE INSTRUCTIONS:
Environmental Responsibility
i
j
h
g
k
n
o
p
l
a
g.1 g.2
b
m
f
e
c
d
j
i

5
Description:
Before Use
Garment steamer assembly
Preparation
Pole assembly
Attach the upper pant clamp to the folding hanger
and set aside. (g.3)
Place the base on the oor and
remove the water tank. (g.4)
1.
2.
3.
4.
Unscrew and remove the fastening
lock from the base of the steamer.
(g.5)
Insert the pole into the fastening
lock, place the pole into the base
and turn in a clockwise direction
until the pole is securely in place.
(g.6)
Tighten the pole’s fastening lock by
turning in a clockwise direction un-
til the fastener is securely in place.
(g.7)
Base
ON:OFF Switch
Removable water tank
Pole Fastening Lock
Pole Fastening Clip
Telescopic Pole
Handle
Steam Head
Head Support
Folding Hanger
Upper Pant Clamp
Hose
Hose Connector
Fabric Brush
Mini Pressing Board
Protective Glove
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
g.3
g.4
g.5
g.6
g.7

6
Locking the pole
Hose & Steam head assembly
Filling the water tank
Never use water that contains additives (starch, perfume,
aromatic substances, softener...) in the steamer. Additives can
aect the properties of steam, corrode internal parts and lead
to the formation of deposits.
The steamer can be used with tap water. If the water in your
area is hard, Steamone recommends you that use distilled or
demineralized water to reduce scaling.
Adjust the pole to its maximum
height by sliding it upwards then
locking the 3 clips. (g.8)
Slide the hanger on to the pole and
tighten the hanger base by turning
in a counter clockwise direction.
(g.10)
Place the head support/hook on top
of the pole and push down to se-
cure. (g.9)
Insert the hose connector into the
base until resistance is felt. Lock
the connector by turning clockwise.
(g.10 & g.11)
Ensure that the steamer is unplugged. Remove the wa-
ter tank from the base of the appliance by pulling the
handle upwards. (g.12)
Hang the steam head on the head
support/hook. (g.1)
1.
2.
3.
1.
1.
2.
g.8
g.10 g.11
g.9
g.12

7
Replace the cap and place the water
tank back on to the base (g.14)
3.
2.
Always check to be sure that the water tank is full before
using your garment steamer.
Never steam a garment while it is being worn. The hose and
steam head may become hot during use. This is perfectly
normal. Be careful to avoid contact with the steam head to
avoid burns.
Operate the steamer on a at surface clear of materials that
may obstruct openings at the base of the steamer.
Lift the water tank to
make sure there is water
in the reservoir. (g.15)
After checking the
reservoir, replace the water
tank on the base.
Unscrew the cap located at the
bottom of the tank and ll with
water. (g.13)
Start
Use
g.13 g.14
g.15

8
Plug in the power cord and switch on
the power button. The power light
will illuminate. The steamer is
operating. (g.16)
The unit will produce steam in 60
seconds at maximum wattage.
(g.17)
Put garment into the folding
hanger. (g.18-a)
For quick steaming, you can also
use your own hanger on the hook.
(g.18-b)
Put garment like dress or pants, into the Upper
Pant Clamp (g. 19)
1.
2.
-
-
-
g.16
g.18-a
g.19
g.18-b
g.19
g.17
Steamone recommends that you wait 2 minutes to reduce
condensation on the steam head and get the best
performance from your steamer. (g.17)
Clothes placement
- If necessary, expand the pole to the desired height by unlocking it, pulling
it gently and locking it again
2min

9
Start steaming by touching material lightly
with steaming head and moving in an up/
down vertical motion.(g.20)
The steam head must be in contact with the garment. (g.21)
The garment must be stretched while steaming (g.22)
Use your free hand to stretch the garment
-
-
-
g.21
Grasp the steam head with the steam vents pointing away from you.
Proper Use
g.20
g.22

10
Tips for better performances with your garment steamer
We recommend checking the garment care label for manu-
facturer recommendations before steaming. We also recom-
mend testing the eect on the garment on an unobtrusive
area such as an inner seam.
Button up the shirt’s collar to prevent from slipping on the
hanger during steaming.
Heavy fabrics may need to be steamed longer.
If you are using the steam head at a position close to the
ground, raise the hose frequently in order to avoid the
formation of condensation. A gurgling noise may be heard if
the exible pipe is pinched.
If no steam is produced, if a gurgling sound is heard or if
water is dripping through the holes of the steam head, raise
the steam hose occasionally to remove condensation inside.
Use caution to avoid burns.
During use, the hose may make a gurgling noise. This is
a normal occurrence due to condensation. If you hear the
gurgling noise, hold the hose up to direct the condensa-
tion back into the appliance.
-Never try to steam the garment in a
horizontal position (g.23)
g.23

11
Fasten the brush to the steam head
(g 25)
The fabric brush can pick up the lint on your garment. It can also be extreme-
ly eective on sofas, bedding, curtains, stued animals, rugs and carpets.
Fabric Brush Use:
Gently brush the area to be steamed with the
grain or nap of the fabric (g.26)
1.
2.
g.25 g.26
Remove the fabric brush once unit is unplugged and
completely cool. Remove it by gently pulling down on the
handle of the fabric brush until it comes o of the steam
head.
Fabric Brush
Be sure unit is unplugged and completely cool before
attaching the fabric brush & creasing tool.
Accessories
Before using the accessories, please read the instructions below.

12
Insert the mini board under the collar
of the garment and steam it vertically
(g.27)
Insert the mini board into the cu of the
garment and steam it vertically. (g.28)
1.
2.
g.27
g.28
Never touch the steam or the operating steam head even
with your protective glove.
Protective glove
Steamone recommends that you use the protective glove when steaming
the garment.
The mini board is designed to deal with the cu and the collar of the garment.
Before steaming the cu and the collar of the garment, adjust the power to
minimum
Mini pressing use :
When using the mini board, always steam in a vertical
position.
Mini Pressing Board

13
Your device has four wheels for ease of transport. Grasp the pole and pull
gently to move the device.
You can also lift up the device in order to move it, again holding the device
at the base of the pole.
To maintain maximum performance, your steamer must be descaled occa-
sionally. The time between descaling operations depends on the quality of
the water and the frequency with which you use the appliance. On average,
the appliance must be descaled after 30 hours of use.
-
-
-
Maintenance
It’s preferable to use distilled or demineralized water to
reduce scaling.
Never touch the steam head until it has cooled down
completely.
Always make sure the pole is rmly attached to the base
unit before lifting up the device (see assembly
instructions).
After use
Transport
After using the garment steamer, switch the power o. The power indicator
light will go o, and you can then unplug the device.
Wrap the cord around the power cord storage area under the base of the
steamer
Always empty the water tank before storage
Do not carry the steamer by the water tank handle, this will only remove
the tank and the unit will fall to the oor
Hang the steam head in an upright position on the hook when not in use.
(g.1)
-
-
-
-
-

14
The water will ow out with the
calcium residue. (g.31)
Maintenance is complete. (g.32)
Replace the drain plug.
4.
5.
6.
g.31 g.32
Don’t ll the boiler by the steam head holes! Never
immerse the steam head in water.
Drain:
Unplug the unit and remove the steam hose from
main unit. Collapse the telescopic poles.
Make sure the base is above a water container. Fill the
water tank with tap water, replace the water tank cap
and put the water tank back on the base.
(g.30)
Lay the base on its right side. Unscrew and remove
the drain plug (g.29)
1.
3.
2.
g.29
g.30
Ensure that the appliance has cooled down completely (2
hours minimum).

15
Problem Possible Cause Solution
The appliance is not turned
on.
Be sure the appliance is
plu
gg
ed in correctly. Next, turn
the power button, the power
indicator light will come on.
There is an obstruction in the
hose.
Check the hose to be sure that
there is nothin
g
in it and that it
is not damaged, twisted or
bent in any way.
The water tank is empty.
Turn off and unplug the
appliance; fill the water tank
with water.
Scale build-up. Descale the appliance usin
g
the
instructions above.
There is an obstruction in the
hose.
Check the hose to be sure that
there is nothin
g
in it and that it
is not damaged, twisted or
bent in any way.
Water running from
the steam head. Condensation in the hose.
Hold the hose vertically to
allow the water to run back in
to the appliance. Do not use
the steam head in a horizontal
position.
The steamer takes a
long time to heat up. Scale build-up. Descale the appliance usin
g
the
instructions above.
There is no steam.
Low steam flow.
Troubleshooting
If you cannot resolve the problem using the steps above, please contact us
by email or phone.
Tel: +33 (0) 826 102 861
Website: www.steam-one.com

16
Modèles & Spécications
Warranty
Model Voltage Frequency power max. Water tank
capacity
Steam
Output
Net
weight
Gross
weight Measures
UNILYS 230V 50Hz 2000W 1.2L 42g/min 8.5 kg 9 kg 308x260x426mm
SteamOne warranty
This product is covered during the warranty period by SteamOne (contact
details page 17) against any manufacturing defect. The warranty is valid for 2
years from the date of purchase and in the country specied.
This SteamOne warranty is in addition to your consumer rights.
All repair costs for a product recognized as having a defect are covered by
the SteamOne warranty, in order to return it to a state of compliance with its
original specications, either through repair, or possible replacement, of the
defective parts. SteamOne may decide to oer a replacement product instead
of repairing the defective one, depending on the situation.
SteamOne’s obligations dened under the terms of this warranty are limited
exclusively to repair or replacement, as stipulated above.
Warranty terms and exclusions
- The warranty period is that of the country of use of the product, even if the
warranty period in the country of purchase is dierent.
- The SteamOne warranty is only valid if local standards (voltage, electrical
frequency, type of electric socket and all other local specications) are com-
patible with the product.
- The application of the SteamOne warranty may take longer if the model in
question is not marketed in the country of use.
- If the product covered by the warranty cannot be repaired in the country
of use, the product may be replaced by an equivalent product or by another
product of the same value wherever possible.
- The SteamOne warranty is only valid upon presentation of proof of purchase
and the warranty card (page 18), duly completed. The defective product must
be either sent by registered mail to SteamOne, suitably packaged, or deliv-
ered directly to SteamOne.
- SteamOne is under no obligation to repair or replace a product that is not
accompanied by proof of purchase and the warranty card.

17
The SteamOne warranty is not applicable in the following cases:
- Damage caused by incorrect use, non-compliance with the instruction and
maintenance manual or use of an electrical power supply that is not compat-
ible with that specied in the manual or on the product is not covered by the
SteamOne warranty.
- Nor does the SteamOne warranty cover damage that is the result of negli-
gence or unauthorized repair or modication of the product.
- Normal wear and tear of the product, maintenance or replacement of certain
parts are not included under the terms of the SteamOne warranty
- Use of unsuitable water or water that contains additives (such as starch,
perfumes, aromatic substances, softeners…).
- Entry of water, dust or foreign bodies in the product.
- Scaling (it is essential that you follow the maintenance instructions de-
scribed in this instruction manual).
- Damage due to overload or impact.
- Damage or accidents linked to re, ood, lightning…
- Incorrect use of the device.
- The warranty is not applicable in case of problems linked to packaging or
transport of the product during shipping by its owner.
Consumer rights
The SteamOne warranty does not aect the legal rights that consumers enjoy
locally or the legal rights towards distributors from whom the product was
purchased. The rights granted by this warranty are specic and do not inter-
fere with other special rights (depending on the country, state, province…),
which the consumer may also enjoy. The consumer may, by his own means,
exercise these rights.
Replaceable parts
Accessories or other parts that can be replaced directly by the user can be
purchased locally, if available. You can contact us at:
Address Email Telephone Warranty
p
eriod
SteamOne
22 rue de Courcelles
75008 Paris
France
STEAMONE WARRANTY CONTACT

18
STEAMONE WARRANTY CARD
Client
Purchasing Date:
Nane/ Company Name
Phone
Adresse
E-mail
Purchasing City
Purchasing Country
Machine model
Machine Nummer
Record
Warranty Card
Table of contents
Other STEAMONE Steam Cleaner manuals