Poltronova Plasma Armchair User manual

english
Plasma instructions
about
use indoor /outdoor
typology armchair and footrest
year 2011
dimension armchair
85 x 108 x 84[h] cm
footrest
85 x 54 x 45[h] cm
weight armchair
22 kg
footrest
11 kg
materials frame in
powder–coated
metal, cushions
in polyurethane
with covering
in polyamide and
elastane fabric
with polyurethane
mid layer
Centro Studi Poltronova
per il desin srl
via Lorenzo Bartolini 2,
50124 Firenze — Italy
www.poltronova.it
[e-mail]
warning
 When sitting on pillows, care should
be taken not to wear studs or buttons that
can scratch the coating.
Dust should be removed from
the cushions by passing a soft cloth, as
clothes beaters and vacuum cleaners could
damage the padding and the coating.
Stains should be treated as soon
as possible with a clean white cloth,
moistened with warm water and, if
necessary, with a specific detergent.
Never apply the detergent directly
to the fabric. It is essential to proceed
manually from the edges to the inside.
Let dry in the open air, without ironing
or vaporizing.
To pull off and wash the cushions,
remove the belt by opening the
snap buttons.
To remove and reinsert the cushions
into the covers, pay special attention not
to force the zip, folding the larger pillows
on themselves.
Before removing it from the cover, pay
attention to the direction of the cushion
and the position of the zip, so to be able
to reinsert the cushion properly later.
The fabrics must be dry cleaned by
a specialist.
Care should be taken to turn the
covers inside out before washing them.
Soap must be neutral and free of
optical bleaches, as common detergents
contain whiteners that can cause
colour alteration.
The covering is designed for outdoor
use, but it is recommended to remove it if
the armchair is exposed for a long time to
the sun or rain.
Clean the structure with a soft
damp cloth, without using solvents or
aggressive substances.
Poltronova will not be liable
for products that are modified or
used improperly.
Poltronova will replace merchandise
with manufacturing defects only if
the product is intact in all its parts
and provided with the original or
equivalent packaging.

c.
b.
b.
a.
a.
c.
3
You’re ready to enjoy your new Plasma!
1
Open the cushions and place them
on the structure of the armchair.
components
a. frame
b. cushions
c. belt
installation &
maintenance
To pull off and wash the cushions,
remove the belt by opening the snap
buttons. To remove and reinsert the
cushions into the covers, pay special
attention not to force the zip, folding
the larger pillows on themselves.
Before removing it from the cover,
pay attention to the direction of the
cushion and the position of the zip,
so to be able to reinsert the cushion
properly later. The fabrics must be
dry cleaned by a specialist, turning
the covers inside out before washing.
2
Add the footrest cushions.
footrest
armchair