Remote Control Features
Poly Studio uses a low-energy Bluetooth remote
control that automatically pairs to your system
when you turn it on for the first time.
In addition to basic remote control functions, it
also provides the following features:
Speaker tracking with group framing
Connect Poly Studio to a
Bluetooth Device
Pair Poly Studio with your Bluetooth device to use
it as an external microphone and speaker for your
device.
To pair Poly Studio with a Bluetooth device:
1 On the remote control, long press Bluetooth
to enable paring mode.
The LEDs blink blue in the middle.
2 On your device, enable Bluetooth and select
Poly Studio from the list of available devices.
The middle LEDs turn solid blue for three
seconds with a notification sound.
Set Poly Studio as the Default
Audio and Video Device
You must set Poly Studio as the default audio
and video device for the applications you use.
The following is a general procedure that you can
use. Your settings may be different.
To set Poly Studio as the default device:
1 Go to your software’s Settings.
2 Find Audio Device and Video Device.
3 Select Poly Studio as the device and click
Save.
Save Camera Presets
The two number buttons on the Poly Studio
remote control serve as camera presets.
To save a camera preset:
1 Turn off group framing and speaker tracking
mode.
2 Adjust the camera.
3 Long press the 1or 2button on the remote
control.
The middle LED lights stay white for three
seconds with a notification sound.
Call Camera Presets
When you turn off group framing and speaker-
tracking mode, you can use the remote control
camera presets.
To call a camera preset:
1 Turn off group framing and speaker-tracking
mode.
2 Press the 1or 2button on the remote control
to use the preset angle.
Pair the Bluetooth Remote
Control with Poly Studio
If you reset your Poly Studio USB video bar or
replace the remote control, you must pair the
remote control to the USB video bar.
To pair the remote control with Poly Studio:
1 Long press the Remote Control Pairing
button on the bottom of the USB video bar
until the LEDs blink blue in the middle with a
notification sound.
2 Long press Mute on the remote control
until you hear a notification sound.
When paired, the middle LEDs remain solid blue
for three seconds with a notification sound.
