Polygroup TG76M6010X00 User manual

TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from Polygroup®!
Carefully follow the instructions below on how to assemble your new tree quickly and at ease:
1. Choose your desired spot for assembling the tree.
2. Assemble the tree stand (Fig. A) and place on a level surface.
* For Indoor Use OnlyFig. B - Tree Assembly
Tree Top
Section 2
Section 1
MODEL #: TG76M6010X00 2020 TREE LETTER "D"
SKU # 5064498 & 911289
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Insert the pole of Section 1 into the assembled stand. Insert the pole of Section 2
into Section 1. Insert the pole of the tree top into Section 2. Ensure that all poles are firmly secured.
5. Shape the tree from the bottom to the top. Start with the branches farthest from the pole – fan out in a star shape (Fig. C), and
continue until the entire tree is shaped.
Top view Side view
Fig. C
NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com OR 1-888-919-0070
Fig. A - Tree Stand Assembly
Click
Pull apart tree stand legs until they
snap and form an ‘X’ shape.
To close the stand, press the metal
button and fold the legs together.
6. Slightly upsweep all tips for a fuller, uniform look. Shift branches to fill in any gaps.Your Christmas tree is now ready to be decorated.
1

STORAGE INSTRUCTIONS
1. Remove all ornaments and decorations.
2. Disassemble the tree from the top to the bottom. Gently lift the pole straight up to remove from the section below, and fold all
branches toward the pole.
NOTE: In case of difficulty separating the poles, apply a small amount of lubricant at the joint, rotate the upper pole in both
directions, and lift the upper pole again.
3. Carefully place all tree sections into the shipping box and tape it shut.
4. Store your tree in a cool, dry place away from sunlight.Exposure to excessive heat or humidity may damage your tree.
5. Keep out of reach of pets and children.
Fig. D
TROUBLESHOOTING TIPS
SPARE PARTS
This tree includes hinge pins/washers.
If extra parts are needed, please contact our customer service center.
Loose Hinge Pin
1. Extra hinge pins are included for repairing the hinges.
Place the branch into the slot of the bracket.
2. Insert a new hinge pin through the hole and secure
using the retainer washer. (See Fig. D)
Distributed by: Hobby Lobby Stores, Inc. • Oklahoma City, OK 73179 • www.hobbylobby.com
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact us at 1-888-919-0070
or visit our website at www.polygroupstore.com. One of our customer service representatives will be happy to assist you.
TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.
Customer Name:
Address:(No P.O. Boxes)
City & State:
Zip Code:
Day Phone:
Date Purchased:
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem:
2