Polygroup TGF0M3P07C00 User manual

Christmas Tree
Model: TGF0M3P07C00
Sku # 619 379
Package Contents
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a. READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b.This product is for indoor use only.
c. This seasonal product is not intended for permanent
installation or use.
d.Do not mount or place the product near gas or
electric heaters, fireplaces,candles, or other similar
sources of heat.
e. Do not secure the wiring of the product with staples
or nails,or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any
wire.
g.Unplug the product when leaving the house,when
retiring for the night,or if left unattended.
h. This is an electric product and not a toy! To avoid risk
of fire,burns,personal injury and electric shock it
should not be played with or placed where small
children can reach it.
i. Do not use this product for other than its intended
use.
j. Do not hang ornaments or other objects from cord,
wire, or light string.
k. Do not close doors or windows on the product or
extensions cords as this may damage the wire
insulation.
l. Do not cover the product with cloth, paper, or any
material that is not a part of the product when in use.
m.Read and follow all instructions that are on the
product or provided with the product.
n. SAVE THESE INSTRUCTIONS
Pre-Assembly
Assembling the tree stand
Assembly
When using electrical products, basic precautions
should always be followed,including the following:
Choose a location near a wall outlet,begin to assemble
the tree.
Follow below steps:
Step 1.
Connect part 1 to 2, then screw part 7(Bolt).
Step 2. Connect part 2 to 3, then screw part 8(Bolt)
Step 3. Insert tree section 9 (I) to bottom cross frame(J),
and then insert tree section 8 (H) to section 9 (I),
section 7(G) to section 8 (H), then section 6(F) to
section 7 (G).
Step 4. Connect part 3 to part 4, then screw part 7(Bolt).
Step 5. Connect part 4 to part 6, then screw part 8(Bolt).
Part Description Quantity
A Tree top, tag 9 1
B Tree section 2,tag 8 1
C Tree section 3,tag 7 1
D Tree section 4,tag 6 1
H Tree section 8,tag 2 1
E Tree section 5,tag 5 1
F Tree section 6,tag 4 1
G Tree section 7,tag 3 1
I Tree section 9,tag 1 1
J Tree stand 1
Bottom Cross Frame
Horizontal Connection Frame
Vertical Connection Tube
“L” Shape VerticalTube
Tube For Hooking Branches
Top Cross Flame
Bolt - Spec M8*16mm
Bolt - Spec M8*50mm
Nut - Spec M8
Triangle Bolt - Spec M6*18mm
Tree Stand Part List
No. Name Qty
1
1 PC
1 PC
1 PC
4 PCS
4 PCS
4 PCS
8 PCS
8 PCS
8 PCS
6 PCS
2
3
4
5
6
7
8
9
10

Step 1.Remove the protective caps, and insert the
section 5 (E) into the section 6 (F).
Step 2. Insert the section 4 (D) into the section 5 (E),
and insert the section 5 (E) into the section 6 (F),
Step 3. Insert the section 2 (B) into the section 3 (C),
insert the tree top (A) into the section 2 (B).
Step 4. Shape the branches to your preference by
working from the bottom to the top. When
adjusting branches, ensure that all wires are
free of branch hinges.
Step 5. Connect the plug(s) securely to the extension
cord(s) as per the color labels indicated in
attached photo and insert the green label
extension cord plug into the wall outlet.
Step 6. When finished shaping the branches, slightly
upsweep all branch tips for a uniform look.
Catuion:to avoid over current, please connect
lighting string accrding to the strings layout for the
tree. (see diagram below)
Maintenance
Care and Cleaning
Troubleshooting
Spare parts
Repairing Loose Hinges
Problem Solution
The tree
does not
light
Ensure that all tree sections are plugged
into each other and that the tree is
plugged into the wall.If your tree came
with a foot pedal,step on the On/Off
button.
Check for blown fuses at the power cord
plug.Replace as needed with the
replacement fuses provided.
Check for loose,broken,or missing bulbs
and replace as needed with the
replacement bulbs provided
This tree package includes hinge pins,washers,bulbs
and fuses for any replacement or repair that you need
to perform on your tree.If extra parts are needed,
contact the Customer Service Team at 1-877-527-0313
between the hours of 8 am and 5 pm EST,Monday
through Friday.
Step 1.Remove all ornaments and decorations.
Step 2.Unplug the cord from the wall and then unplug
each section of the tree.
Step 3.Gently lift the tree top straight up to remove
from the center sections and fold all branches
towards the pole.
Step 4.Repeat this step for the bottom tree section.
Step 5.Carefully place all tree sections into a shipping
box and tape it shut.
Step 6.Store your tree in a cool,dry place away from
sunlight.
Step 1.Place the branch into the slot of the bracket.
Step 2.Insert a new hinge pin through the holes of the
bracket and secure with a washer.
Assembling the tree
Christmas Tree
Model: TGF0M3P07C00
Sku # 619 379
Operation
Turning on the tree
NOTE:If some bulbs do not light or flicker,search for
any loose plugs and/or broken,loose,or missing bulbs.
Replace bulbs promptly with the replacement bulbs
provided in order to maintain the performance and life
expectancy of your tree.
Step 1.Connect the light strings of the tree together
and plug the power cord into a wall outlet.
Step 2.If the tree comes with a foot pedal,step on the
On/Off button.
1
2
3
4
5
6
7
8
9
50Lights+100 Lights
100Lights+100 Lights
100Lights+100 Lights
100Lights
50Lights+100 Lights
100Lights+100 Lights
50Lights+100 Lights
+100Lights
50Lights+100 Lights
+100Lights+100 Lights
100Lights+100 Lights
+100Lights
100Lights+100 Lights
+100Lights+100 Lights
100Lights+100 Lights
50Lights+100 Lights
50Lights+100 Lights
Insert
Green Label
Plug Into Wall
Outlet
Electrical Rating for the tree: 4.42A 120V 60Hz
Extension Cord to Wall Outlet
Electrical Rating for the tree: 5.10A 120V 60Hz
Extension Cord to Wall Outlet
Foot Pedal
on/off Switch
InsertRed Label
PlugsInto Red
LabeledExtension Cord
InsertYellow Label
PlugsInto Yellow
LabeledExtension Cord
InsertBlue Label
PlugsInto Blue
LabeledExtension Cord
InsertPurple Label
PlugsInto Purple
LabeledExtension Cord
InsertOrange Label
PlugsInto Orange
LabeledExtension Cord