Polygroup TZ76M3O25X00 User manual

Fig. B
TREE ASSEMBLY INSTRUCTIONS
MODEL #: TZ76M3O25X00
C
D
B
E
G
I
H
TREE TOP
ROW
WITHOUT COLOR
COLOR CODED
RED
B
RED
YELLOW
GREY
DARK BLUE
F
LIGHT BLUE
DARK PURPLE
GREEN
H
GREEN
ORANGE
1
NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com OR 1-888-919-0070
1. Shape each branch by either placing the branch in a bracket which is at a comfortable level to work (Fig. 1), or holding the
branch in your hand with the hooked end pointing down. (Fig.2) BEGIN WITH THE BRANCHES AT THE BOTTOM OF THE TREE
AND WORK UP TOWARDS THE TOP.
2. When shaping each branch, work from the branch hook and move outwards to the end tip of the branch. Start by wrapping the
back tip around the end of the branch stem to cover the branch wire. (Fig. 3)
3. Working from the branch's hook moving outwards, fan each tip out using this pattern: one tip to the right of the branch's center
wire, one tip to the left of the branch's center wire, one tip parallel to the branch's center wire. (Fig. 4) Tips should be slightly
offset from each other so that they do not line up exactly one behind the other. All tips should be curved upwards when looked
at from the side. (Fig. 5)
4. As each branch is shaped, place the color coded branch securely into the matching color coded bracket. (Fig. 6) As you finish
each level of branches, make sure the rows look evenly distributed to the levels above and below it. Adjust tips as needed to
even appearance. (If your tree includes branches with side wings, arrange these branches so that the wings are on every other
branch if necessary.)
5. When all the branches are shaped and put into their color coded matching brackets, shape the top section. Do this by pulling
down each row of tips in an even, circular pattern. (Fig. 7)
6. Start from the bottom layer of the tree topper and work upwards to the top tip.
7. Carefully curve each tip upwards for a natural look.
8. Insert top securely into tree's center pole. (Fig. 8)
9. Step back and take an overall look at the tree. Shift tips as needed to fill in any gaps. Slightly upsweep all branch tips for a
uniform look. Your Christmas tree is now complete and ready to be decorated. (Fig. 9)
SHAPING AND ADDING BRANCHES
Fig. A - Tree Stand Assembly
Unfold the legs and lay the
stand in a flat area. Then slide
the locking disc downward and
snap into place.
1. Before you start to assemble your tree, choose an appropriate location .
2. Assemble the tree stand and place on a level surface. (See Fig. A) Then insert the tree pole tightly into the stand.
3. Sort all branches according to color codes marked on the end of each branch. Below is a list of the color codes for your tree.
(See Fig. B) (Please note: the number of rows may vary with different tree sizes.)
Congratulations on purchasing your new tree from Polygroup®! Carefully follow the instructions below on how to quickly
and easily set up your new tree.

Fig. 3
Fig. 6 Fig. 8
Fig. 4
Branch
Fig. 5
Side view
Fig. 2Fig. 1
Fig. 9Fig. 7
STORAGE TIPS
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact us at 1-888-919-0070
or visit our website at www.polygroupstore.com. One of our customer service representatives will be happy to assist you.
TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.
Customer Name:
Address(No P.O. Boxes):
City & State:
Zip Code:
Day Phone:
Date Purchased:
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem:
2
1. Remove all ornaments and decorations.
2. Start by removing the tree top and then removing each layer of branches going from top to bottom of the tree.
3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint and rotate the upper pole in
both directions. Lift up the upper pole again.
4. Press tips neatly back to the center of branch wire.
5. Carefully place all tree sections and branches into shipping box and tape it shut.
6. When not in use, please store the tree in a cool, dry place away from sunlight.
7. Keep out of reach of pets and children.