Polygroup TV50P2819L01 User manual

Part
1
2
3
4
5
6
Description
Tree Body
Tree Top
Tree Body
Tree Body
Stand
Quantity
1
1
1
1
1
1
Tree Top
Congratulations on purchasing your new tree from Polygroup®!
Carefully follow the instructions below on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an
appropriate location near a wall outlet.
MODEL #: TV50P2819L01
TREE ASSEMBLY INSTRUCTIONS
*Electrical Rating For The Tree
(For Indoor and Outdoor Use)
Input: 120V, 60Hz, 0.16A
Output: 29V DC 0.28A
PACKAGE CONTENTS
1
1
4
5
6
3
2
2. For easy do-it-yourself assembly, the top trees and
pole sections are attached coded labels to complete
installation step by step. Before you start to
assemble your tree, assemble and place on a level
surface. (See Fig.A)
(1) Insert tree body 1into the top hole of the Stand 3.
(2) Insert the tree top 2into the top of tree body 1.
(3) Insert tree body 4into the top hole of the Stand 3.
(4) Insert the trunk section 5into the bottom trunk
section 4.
(5) Insert the tree top 6into the top of tree body 5.
3. Connect the adapter into the wall outlet. Your
entire tree should now be lit. If some bulbs do
not light or flickers, search for any bulbs loose,
missing or broken bulbs. Replace bulbs promptly
in order to maintain the performance of your
pre-lit tree.
4. Shape and shift tree branches to fill in any gaps.
Fig.A
NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com OR 1-888-919-0070
Fig.B
Adapter
To Be Plugged
Into Wall
Outlet
Insert Green
Label Extension
Cord into Adapter

STORAGE INSTRUCTIONS:
TROUBLESHOOTING TIPS
For pre-lit trees spare bulbs and fuses are also included.
If extra parts are needed, please contact our customer service center.
SPARE PARTS
For Pre-lit Trees, If The Tree Does Not Illuminate
1. Please check adapter is plugged into the wall outlet.
2. Check for loose connection between light string plugs and extension cords.
3. Please check for loose, broken or missing light bulbs and replace as needed.
1. Unplug adapter from the wall outlet and remove all ornaments and decorations.
2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section below.
3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint and rotate the upper pole in both
directions. Lift up the upper pole again.
4. Continue by gently lifting straight up each section(s) from the section below and fold all tips toward the pole until the bottom
section is removed from the tree stand.
5. Carefully place all tree sections into shipping box and tape it shut.
6. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to excessive heat or humidity
may damage your tree.
7. Keep out of reach of pets and children.
2
CAUTION:
1.To reduce the risk of fire and electric shock:
a) Use only the power supply that was provided with this product;
b) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal, and
c) Do not mount or support strings in a manner that can cut or damage wire insulation.
2. Use only the adapter supplied with this product. Using a different adapter will damage the lights and may cause fire, or
electrical shock hazards.
For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact us at 1-888-919-0070
or visit our website at www.polygroupstore.com. One of our customer service representatives will be happy to assist you.
CUSTOMER SERVICE FOR CHRISTMAS TREES
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem:
Customer Name:
Address(No P.O. Boxes):
City & State:
Zip Code:
Day Phone:
Date Purchased:
TREE ID# IS LOCATED ON END PANEL OF BOX. TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.