Please read the instruction manual before using
the products. This Documentation has been
prepared for you to fully enjoy all the features
this unit has to offer. Please save the manual for
future reference.
WIFI Connection Instructions:
1.Search for WIFI controller “LED net*****” in your
phone’s WIFI network. Usually a password is not
required however the default password is
‘88888888’.
Open ‘Magic Home’ App and wait while your phone
scans for the WIFI controller.
Once connected to the controller open the app to
discover a huge array of fun and interesting options.
It is a great idea to regularly check for App updates
as we are always upgrading and improving.
F.A.Q.
Q.My phone cannot connect to WIFI controller?
A.Connect WIFI controller correctly.
Power supply-Wifi controller-LED lighting. Ensure
phone’s Wifi network works normally. Then
connect your phones wifi network to wifi controller
LED Net********
Q.I forgot my Wifi controllers Password?
A.The default password is ‘88888888’. If you have
changed the password you can reset by holding
down the ‘RESET’ button for ten seconds. You will
need to open the plastic case at the back to find the
RESET button.
It is possible to use eight phones to control one WIFI
controller.
Important Specifications.
Working Voltage: AC/DC 12V
Output Channel : Can be used 3 channel
Output Current: RGB, 5Ax3
Connect Method: Waterproof Common Anode
Dimension:L130x5W95xH40MM
Remote Control Distance:20 Metres outdoors
