Ponilion A500 User manual

Portable Energy Storage
Where You Are, Where Power Is
Product Manual
（A500&A1000）
※It Is A Portable Energy Storage Power Supply, Not A Toy, Please Do Not Play For Children.
※Please Read The Product Instructions Carefully Before Using.
※If It Is Stored For A Long Time (More Than A Month), Please Charge The Product To About
70% Of The Electricity.
※Do Not Charge, Use Or Place The Product Near The Source Of Fire Or Overheating.
※Products And Accessories Are Subject To Change Without Notice.

1
Catalog
1. English Directory---------------------------------------------------2~15
2. 中文说明书----------------------------------------------------------16-32
English Directory
(1) Spare Parts List---------------------------------------------------------------------------------2
(2) Product Introduction-------------------------------------------------------------------------2~3
(3) Product Diagram-----------------------------------------------------------------------------4~5
(4) Product Parameters-------------------------------------------------------------------------6~7
(5) Product Protection Function---------------------------------------------------------------8
(6) Operating Instruction For The Products-------------------------------------------------9~11
(7) Precaution------------------------------------------------------------------------------------12~13
(8) Solution For The Common Problems--------------------------------------------------13~14
(9) Trouble Removal--------------------------------------------------------------------------14~15
(10) After-Sales Service-----------------------------------------------------------------------15

2
1. Spare Parts List
No.
Name
Accessories Description
1
Mainframe
A500&A1000 There Are Differences In
Appearance, As Shown In The Figure
：
A500
2
Adapter
Charging Products With Municipal Electricity
3
Power Cord
Adapter To Connect To City Power
4
M To M Car
Charging Cable
Charging In The Car, Car Jump Starter
(Start The Car After Charging The Car Battery)
5
Instructions
Operational Guidance And Warranty Card
2. Product Introduction
This Product Is A Portable Multi-Functional Power Source That Can Store Energy,
And It Is Equipped With High-Efficiency Power Lithium-Ion Battery, Safe Lithium
Battery Management System (BMS), High-Efficiency Energy Conversion Circuit, And
It Is Wrapped By High-Strength Aluminum Alloy. After Being Repeatedly Tested And
Verified For A Long Time By R&D Team Of Company, The Product Has Obtained
International Certifications Such As CE\FCC\Rosh\PSE\UN38.3. The Top Design And
Mature Production Control, The Products Are Safe And Reliable, Which Can Be
Powered By Solar Power, Vehicle Power Generation, And Electric Supply Charging.
The Product Has The Characteristics Of Light Weight, Small Volume And Large
Power, Which Can Provide Customers With Convenient Mobile Energy. The Main
Features Of The Product Are:
AC100~240V/50~60Hz Pure Sine Wave Output(Setting According To National Or Regional Power Standards）
Solar Energy MPPT Charging System.(Maximum Power Point Tracking)
Automatic Adaptive Adapter For Electric Charging

3
On-Board Charging
12V12A Cigarette Lighter Output
12V5A DC5.5 Output Port*2
USB-C Pd 60W/5~20V Output
USB -A QC3.0 18W/5~12VOutput
USB -A 2.4A Intelligent Recognition Output Port*2
Charging The Start Battery Of A Vehicle, Auxiliary Start-Up Vehicle
90%-97%High Conversion Efficiency（Reduce Heat，Increase Actual Output Energy）
Led High-Brightness Display Screen（Real-Time Power, Power, Residual Time, Etc.）
Led High-Brightness Lighting Lamp（Low Bright, High Bright, SOS, Flash）
BMS Multilevel Protection System
Intelligent Identification Device Power, Accurate Display Of Remaining Usage Time
Ultra-Long Cycle Life, Greater Than 800 Cycles
Fanless Design, Product Silence, Safer
Sandblasting Oxidation Treatment Of Industrial Aluminium Alloy Shell
Products Can Meet The Demand Of Power Supply For Most Household
Appliances, Such As Rice Cookers, Mini- Refrigerators, Speakers, Televisions,
Mobile Phones, Computers, Digital Cameras, Tablet Pc, Led Lights, Emergency
Lights, Outdoor Lighting, Outdoor Construction, Electric Tools, Pumps , Medical
Equipment, Etc. It Includes A Wide Range Of Applications, Such As Rescue And
Relief Work, Emergency Rescue, First Aid, Excavation, Decoration, Construction,
Tourism, Camping, Solar Power Generation And Other Fields.

4
3. Product Diagram
3. 1 Introduction Of Product Panel Function
No. Function Description
1
Display Screen
7
QC3.0 Output Port
2
DC Switch
8
USB-C PD3.0 60W Output Port
3
DC 5.5 12V Output Port
9
USB 5V2.4A Output Port
4
Led Floodlight
10
AC Switch
5
Cigarette Lighter Port
11
AC Output Port
6
DC Input Port
12
Led Switch

5
3.2 Introduction Of Display Screen
No.
Name
Function
1 Charge Indicator Respectively “DC->”/“Car->”/“PV->”,Represents Different Charging Modes.
2 Electricity Icon
The Battery Power Is Displayed In Six Cells, And The Charging Will
Indicate The Battery Power By Running Horse.
3 Battery Indicator According To The Percentage, The Battery Power Is 0%-100%.
4 Residual Time Indication “Time To Full” Display Full Remaining Time，“Time To Empty” Display The
Remaining Time Of Emptying, The Corresponding Number Will Be Below
+H Or M Represents The Remaining Hours And Minutes.
5 Voltage Indication Number +V Combination，Display The Built-In Battery Voltage.
6 Total Power Indication Number +W Combination，Polling Shows The Total Power Of Charging
And Discharging, Flickering Represents The Total Power Of Charging,
Non-Flickering Represents The Total Power Of Discharging.
7 Interface Status Indication DC, Car, USB-A, USB-C, AC, Light, R
epresents The Corresponding
Interface State.
8 Car Start State Indicator The Three Right-Most Display Combinations, Car-Start/Car-Start
Failed/Car-
Start Completed, Represent That The Car Is Starting And
Charging, Starting And Charging Fails, Starting And
Charging Is
Completed.

6
4. Product Parameters
Project Parameter A500 A1000
Battery
Battery Type Lithium Ion Battery
Battery Power 500Wh 1000Wh
Total Capacity 135200mAh 270,000mAh
Voltage 14.8V 14.8V
Ampere-Hour 33.8Ah 67.5Ah
Cycle Life 800 Cycles 800 Cycles
BMS Over Voltage, Low Voltage, High & Low Temperature, Three-Stage Overcurrent, Short Circuit Protection
AC Output
Output Voltage 100-240V（Depending On The Factory Settings In Different Countries And Regions）
Output Frequency 50-60Hz（Depending On The Factory Settings In Different Countries And Regions）
Output Power
AC500w About 30 Minutes AC1000w About 5 Minutes
AC400w About 65 Minutes AC800w About 60 Minutes
AC300w About 85 Minutes AC500w About 100 Minutes
AC200w About 130 Minutes AC300w About 160 Minutes
AC100w About 270 Minute AC100w About 540 Minute
Waveform Pure Sine Wave Pure Sine Wave
Efficiency 70%Load：＞90%
DC Output
DC5.5 Port DC12V5A
Cigarette Lighter Port DC12V12A
Efficiency 70%Load：＞93%
USB Output
USB 1 5V2.4A
USB 2 5V2.4A
USB 3 Qc3.0, 5-12V，18W（Max）
USB -C Output PD3.0 5-20V，60W（Max）
Led Lighting
Low Bright 5W（Max）
High Bright 10W（Max）
SOS YES
Flash YES
Charge
Adapter 19V5A About 6h 19V5A About 12h
Car 13V8A About 6h 13V8A About 12h
PV 24V5A About 7h 24V5A About 13h
Power Consumption Quiescent Current ＜100uA ＜100uA
Product Weight Net Weight 5.9Kg 9.9Kg
Gross Weight 7.6Kg 12Kg
Product Volume Host 200*176*146 200*294*146
Packing 340*295*250mm 450*355*300mm
Temperature
Charge 0~40℃（32~104℉）
Discharge -20~50℃（-4~122℉）
Storage -20~45℃（-4~113℉）

7
5. Product Protection Function
No. Model
Protection Project A500 A1000
1. Over Voltage Protection 16.8V±0.2V 16.8V±0.2V
2. Low Voltage Protection 12V±0.5V 12V±0.5V
3. Battery Cryogenic Protection Charge:0℃，Discharge:-10℃
4. Battery High Temperature Protection 1 Charge:45℃
5. Battery High Temperature Protection 2 Discharge:60℃
6. Battery Overcurrent Protection 1 60A,2s 100A,2s
7. Battery Overcurrent Protection 2 100A30ms 150A,30ms
8. Battery Short Circuit Protection <1Ms
9. AC Short Circuit <50Ms
10. AC Overload 600W,5-10s 1100W,5-10s
11. USB-C Over Current 3.3±0.2A
12. USB-A over Current 2.6±0.15A
13. Cigarette Lighter Over Current 12A±1A
14. DC5.5 Over Current 6A±0.5A

8
6. Operating Instruction For The Products
6.1 How To Charge
The Product Has A Charging Protection Function, And It Will Automatically Stop
Charging, After The Product Is Fully Charged According To The Normal Charging Operation.
In Order To Avoid Other Unexpected Events, It Is Recommended To Disconnect The
Charging Connection In Time After The Product Shows It Is Fully Charged. While It Is Used, It
Needs To Be Charged, If The Output Power Is Less Than 100W, The Product Will Be Fully
Charged Gradually According To The Internal Battery Cell Capacity, If The Output Power Is
Greater Than 100w, The Product Will Slowly Run Out The Internal Battery Capacity, And The
Product Can Be Used Normally After The Full Charge.
The Product Designs Two Charging Interfaces, The Leftmost Input Interface And The
Cigar Lighter Interface Of The Dc Area. The Input Interface Supports Adapter Charging Or
Solar Panel Charging That Meets Voltage Requirements (17-25V). The Interface Of Cigar
Lighter On The Left Side Supports Vehicle Power Supply Charging With 12.5-16V (This
Interface Is Also The Discharging Interface Of Cigar Light In The Dc Area). After Any
Charging Mode Is Activated, The Display Area Of Charging Mode In The Display Screen Will
Flash The Icon Corresponding To The Charging Mode, And They Are “DC->”, “Car->”, “PV->”,
Which Means The Adapter Charging, Vehicle Power Supply Charging, And The Solar Panel
Charging. At The Same Time, The Power Of Battery Will Be Indicated In The Form Of The
Horse Race.
6.1.1 Solar Power Charging
Insert The Plug Of The Unfolded Solar Panel Into The “Input” Interface, The Screen Displays
“PV->” Flashing, The Icon Of Battery Scrolling Displays And The Remaining Time Of Fully
Charging Is Displayed. The Solar Panel Power Is Greatly Affected By The Light, And The
Generated Power Will Change, So It Can Result In The Remaining Time Dynamically
Changes, Which Is Normal.
6.1.2 Adaptor Charging
Step1. Insert The Adapter Ac Input Plug Into The Electric Supply, Step2. Insert The Adapter
Dc Output Plug Into The “Input” Interface, The Screen Displays “DC->” Flashing, The Icon Of
Battery Is Scrolling Displayed, And The Remaining Time Of Fully Charging Is Displayed.
When Charging Is Started, The System Will Automatically Detect The Input Power, The
Remaining Time Will Change Dynamically, Which Is Normal.

9
6.1.3 Vehicle Power Supply Charging
Step1. Start The Car, Step2. Insert The Accessory "Car To The Male To The Male Line" Into
The Car Cigar Lighter, Step3. Insert The Another End To The "Cigar Light" Interface Of The
Product, The Screen Displays "Car->" Flashing, The Battery The Icon Of Batter Is Scrolling
Displayed And Displays The Remaining Time Of Fully Charging Is Displayed.
6.2 Product Output (Electricity Consumption)
The Product Has High Low Voltage, High Low Temperature, Multiple Over-Current, Short
Circuit And Other Protection Circuits. If The Output Is Suddenly Interrupted, First Check
Whether The Peripheral Electrical Equipment Exceeds The Power Or Happens Short Circuit,
And Then Restart The Machine To Check Whether There Is Power. After The End Of Power
Consumption, In Order To Save The Power, Please Manually Shut Down The Machine After
Using, If There Is Any Abnormal Phenomenon, Please Contact The Manufacturer Or Dealer.
This Product Is Designed With 4 Regional Function Outputs, Which Are Dc Area, USB
Area, Ac Area And Light Area. Each Area Is Provided With A Corresponding Button For
Turning On Or Off The Function Output And All Interfaces Of The Corresponding Area. Press
And Hold The Button Of The Corresponding Area For About 1 Second To Open All The
Interfaces Of The Corresponding Area, And The Corresponding Button Will Be Lit And It Is
Blue, And Press The Button Again For About 1 Second To Close All Interfaces In The
Corresponding Area. If The Button Is Pressed For More Than 3 Seconds During The
Shutdown Process, The Entire System Will Be Shut Down.
6.2.1 AC Output
Press And Hold The AC Button In The AC Area For About 1 Second, The AC Output Will
Be Turned On, And The Ac Icon Will Be Displayed On The Interface Discharging Icon On
Display. In This Case, Long Press The AC Button For About 1 Second, The Ac Output Will Be
Turned Off. If The Button Is Pressed For More Than 3s During The Shutdown Process, The
Whole System Will Be Shut Down.

10
6.2.2 DC Area Output
Press And Hold The Dc Button In The DC Area For About 1 Second To Turn On The
DC5521 And Cigar Light Output. The Interface Discharging Icon Will Display The DC And Car
Icons On The Display. In This Case, Long Press The DC Button For About 1 Second, The DC
5521 And Cigar Light Output Will Be Turned Off. If The Button Is Pressed For More Than 3s
During The Shutdown Process, The Whole System Will Be Shut Down.
6.2.3 USB Area Output
Press And Hold The USB Button In The USB Area For About 1 Second To Turn On The
USB -A And USB -C Output. The Interface Discharging Icon Will Display The USB -A And
USB -C Icons On The Display. In This Case, Long Press The USB Button For About 1
Second, The USB -A And USB -C Output Will Be Turned Off. If The Button Is Pressed For
More Than 3s During The Shutdown Process, The Whole System Will Be Shut Down.
6.2.4 Led Lighting
Press And Hold The Light Button In The Light Area For About 1 Second To Turn On The
Light Lighting To Enter The Low Light-Level Mode. The Interface Discharging Icon On The
Display Will Display The Light Icon. Successively Clicking The Button Will Enter The High
Light-Level Mode, SOS Mode, And Flash Mode. When The Light Is Working, Press And Hold
The Light Button For About 1 Second, The Light Lighting Will Be Turned Off. If The Button Is
Pressed For More Than 3s During The Shutdown Process, The Whole System Will Be Shut
Down.
6.2.5 The Function Of Car Starting
Step1. For The Key-Started Car, First Rotate Gear Of The Key To The On Position. For
The One-Key Starting Car, Press The Start Button Until The Cigar Lighter Power Is Turned
On. (There Are Individual Vehicle Models That Do Not Support The Cigar Lighter Interface
Input And Cannot Use This Starting Function, Please Use Other Professional Starting Power
Supply).
Step2. Then Use A Male-To-Male Car Cigarette Lighter To Connect The Cigar Lighter
Interface Of The Product Or The Cigar Lighter Interface Of The Started Car.
Step3. Double-Click The Leftmost Button On The Panel To Activate The Car Starting
Function. This Product Charges The Starting Battery Of Car, And The Display Will Flash
Car-Start For 5-30 Minutes (Depending On The Vehicle Models And The Degree Of
Consuming Power). The Display Shows Car-Start Completed, Indicating That Charging Is
Complete And The Car Can Be Started With A Key Or Button. If The Display Shows Car-Start
Failed, The Charging Has Failed And May Not Be Activated This Time. The Cause Of The
Failure May Be Due To Insufficient Power Of Product , Improper Operation, Or Poor Contact,
Or Failure Of The Auxiliary Battery Of Car.
Step4. If The Above Operation Shows That The Charging Is Completed, The Car Can Be
Started Normally. If It Still Can’t Be Started, It Can’t Be Charged From External Power Supply
Due To The Serious Failure Of The Auxiliary Battery Of Car.
7. Precaution
Please Read The Precaution That Is Divide It Into “Danger”, “Warning” And “Caution” Levels.

11
“Danger” Means Will Cause The Personal Injury.
“Warning” Means Will Happen The Dangerous Things.
“Caution” Means Will Cause The Damage To The Product Or Shorten The Service Life.
The Product Outputs High-Voltage Ac. Please Do Not Insert The Hand Or Hand-Held
Metal Conductor Into The Ac Socket.
Non-Professionals Should Not Open The Product Without Permission To Avoid
Dangerous Things Such As Electric Shock Or Short Circuit.
Do Not Place The Product In A High Temperature Environment (Over 50 Degrees
Celsius) Or Near A Fire Source.
The Product Is Not A Toy, Please Do Not Let Children Play It.
Do Not Use It In A Humid Environment.
Do Not Hit Or Strike The Product.
Please Read The Specific Battery Charger Manual Before Use.
Do Not Disassemble The Product
Do Not Use The Obvious Broken Product
Please Use The Original Adapter To Charge Or The Adaptor That Meets The
Manufacturer's Specified Electrical Parameters.
Please Select The Solar Panel According To The Electrical Parameters Specified By The
Manufacturer. It Is Forbidden To Charge With Solar Panels That Are Higher Than 25v.
Charge The Battery Cell Within The Temperature Range Of 0 To 45 °C, Under Too Low
Temperature Conditions, It Will Shorten The Cycle Life Of The Battery Cell.
On The Condition Of Long-Term Storage (More Than 3 Months), It Should Be Stored In A
Low-Humidity Environment Without Corrosive Gas In A Half-Electrical State At A
Temperature Of -10 To 35 °C.
If The Product Emits Off-Flavor And Heating During Charging Or Storage, Stop Charging
Immediately And Place It In An Open Place For Long-Distance Observation. After
Confirming The Safety, Contact The Manufacturer Or Dealer.

12
This Product Is A Power Supply. Please Select The Corresponding Model According To
The Power Equipment. It Is Forbidden To Use This Product With Over Power And Over
Load.
Do Not Output The Short Circuit.
This Product Is Set At The Factory According To The Voltage Standards Of Different
Countries.
Before Purchasing And Using, Please Consult The Dealer Or Use The Product
Operating Guide Book.
When The Power Of Product Is Run Out, Please Charge It In Time.
Product Parts Are Environmental Friendly And Recyclable. Please Recycle It According
To Local Regulations.
In Order To Save The Power Of The Product, Please Turn Off The Power When The
Product Is Used Up, And Turn It On Again When You Use It Next Time.
If The Battery Is Stored For More Than 6 Months, Please Charge And Discharge The
Product 1-2 Times In Order To Extend The Service Life Of Battery.
8. Solution For The Common Problems
Q：If The Product Is No Fan For Cooling, Will It Be Safe?
A：The Products Are Designed By Top Designers And Use High-Performance
Components. The Products Without Fan Are Quieter And Safer.
Q：How Long Can The Product Be Stored?
A：Half Or Above Of The Battery, It Can Be Generally Stored For 6-12 Months. It Is
Recommended To Charge It Every Three Months.
Q：How Long Does It Take To Fully Charge The Product?
A：A500 Can Be Charged To 80% In 4 Hours With The Standard Adapter, And It Can Be
Fully Charged In About 6 Hours; The A1000 Can Be Charged To 80% In 8 Hours With
The Standard Adapter, And It Can Be Fully Charged In About 12 Hours.
Q：Can It Be Charged With Both Solar Energy And Vehicle Power Supply At The Same
Time?
A：It Can Be Charged Together At The Same Time, And The Charging Time Will Be
Greatly Shortened.
Q：Can The Product Be Discharged While Being Charged (Output Used)?
A：This Product Supports Discharging While Charging, And It Can Be Used At The Same

13
Time. When The Output Power Is Greater Than The Input Power, The Battery Power Is
Slowly Reduced, And When It Is Reduced To The Low Battery State, The Output Is
Turned Off.
Q：Does The Product Have Temperature Protection？
A：When It Is Used In A High Temperature Environment, If The Internal Temperature Is
Higher Than 50 °C, The Circuit Will Be Turned Off For Battery Safety.
Q：Will The Product Automatically Shut Down?
A：After The Product Is Deeply Discharged, It Will Automatically Shut Down, But Under
Normal Circumstances, After Turning On It, It Will Not Automatically Sleep For
Continuous Power Supply.
Q：How Much Discharging Capacity Of Car Can Be Started With This Starting Function
Of Product?
A：The Product Is Used To Charge The Car Battery, And Then Use The Original Battery
To Start The Car. If The Battery Is Broken Or The Circuit Is Faulty, The Car Starting
Function Cannot Be Used. If You Mind, Please Purchase A Professional Starting Power
Supply Of Car.
9.Trouble Removal
9.1there Is No Response When The Product Is Turned On, And Output Is Non-Available
For DC, USB, AC, And Light.
Solution：
(1) Remove The Product Load, Then Charge It For 5-10 Minutes And Re-Turn It On.
(2) Please Ensure That The Product Is Currently Used In The Normal Temperature.
9.2the Product Can Be Turned On, But The Corresponding Output Interface Has No
Output (DC, USB, AC).
Solution：
1) Check If The Power Of Product Is Too Low, If So, Please Charge It In Time.
2) Check If The Power Equipment Is Higher Than The Output Power Of The Product, Which
Result In The Protection, Please Remove The Load, And Turn It On Again.
3) Confirm Whether The Output Of This Product Meets The Power Requirements Of The
Electric Device.
4) Check If There Is A Short Circuit Between The Output Port And The Electric Device, And
Then Restart The Device After Removing The Device.
5) Check If The Device Is Used Normally On Other Power Sources, If It Is Used Abnormally,
Which Is Caused By Incompatibility Of Certain Devices.
9.3 Accidentally Shutdown During Using Product.
Solution：

14
This Product Has A Built-In Real-Time Monitoring System, Which May Cause The Shut
Down Product Due To Starting Internal Protection System. The Events That May Cause
The Protection System To Start May Be Overcharge, Over Discharge, High Temperature,
Low Temperature, Over Current, And Short Circuit. In Order To Solve The Problem
Quickly, Please Remove All The Electrical Equipment, Keep The Temperature Of
Product Standing Within The Normal Temperature, And Charge The Product For 5-10
Minutes, Also Check If There Is Any Fault In The Electrical Equipment. Then Re-Start
The Product.
9.4 The Product Cannot Be Charged.
Solution：
(1) Check If The Electrical Parameter Of Charging Are Within The Charging Range Of This
Product.
(2) Check If The Current Device Has Started Temperature Protection Because The
Temperature Is Too High Or Too Low.
10. After-Sales Service
The Guideline For The Warranty:
If The Product Happens Failure, Please Follow The Instructions. If You Still Can't Solve
The Problem, Please Contact Our After-Sales Service Personnel. When Contacting The
After-Sales Service Personnel, Please Provide The Following Information: Product
Model, Date Of Purchasing, Contact Number, Detailed Address, Description For Product
Failure. Please Cooperate With And Answer The Detailed Inquiries From Our After-Sales
Service Engineers, Including On-Site Conditions, Fault Performance Status,
Frequent/Incidental Accidents, And Incorrect Operation Procedures, So That Our
Company's After-Sales Engineers Can Find Out The Reasons And Then Reply (Or
Guide) The Users How To Solve Product Failures. If The Problem Still Cannot Be Solved,
Please Contact Your Dealer.
The Warranty Period Is 12 Months From The Date Of Sale;
During The Warranty Period, The Defects In Materials And Workmanship And
Damage Caused By Non-Artificial Reason, The Company Will Provide Repair Free Of
Charge And Replacement Parts, The Parts Are Owned By Our Company;
During The Warranty Period, The Following Conditions Cannot Be Used For Free
Maintenance Services:
Open The Product Privately;
Damage To The Surface Coating And Appearance Is Not Covered By The Warranty.
The User Did Not Follow The Instructions.
Failure Or Damage Caused By Accidents, Man-Made, Environmental And Other Factors
(Mis-Operation, Collision, Unreasonable Voltages, Dampness.).
The Outer Packing And Accessories Of Product Are Not Covered By The Warranty.

15
便携式储能电源
能量随行
产品说明书
（A500&A1000）
※本产品是便携式储能电源，不是玩具，请勿给儿童玩耍。
※使用前请仔细阅读产品说明书。
※如长时间存储（一个月以上），请将产品充电至 70%电量左右。
※请勿在靠近火源或过热的情况下充电、使用或放置产品。
※产品及配件如有调整，恕不一一通知。

16
目录
1. 配件清单---------------------------------------------18
2. 产品介绍---------------------------------------------18~19
3. 产品图示---------------------------------------------20~21
4. 产品参数---------------------------------------------22~23
5. 产品保护功能-----------------------------------------24
6. 产品使用说明-----------------------------------------25~28
7. 注意事项---------------------------------------------28~29
8. 一般问题解答----------------------------------------30
9. 故障排除---------------------------------------------31
10. 售后服务------------------------------------------32

17
1．配件清单
序号 名称 配件说明
1 电源主机 A500 和A1000 主机外观有差异，图示为 A500
2 适配器 使用市电给产品充电
3 电源线 适配器连接市电
4 车充公头对公头线 车载充电和汽车启动（给汽车电瓶充电后启动汽车）
5 说明书 操作指导及保修卡
2．产品介绍
本产品为便携式多功能储能电源，产品内置高效动力锂离子电池、安全的锂电池管理系统
（BMS）、高效的能量转换电路，由高强度铝合金机身外壳包裹，产品经过公司研发团队长时间的
反复测试、验证，已经获得 CE\FCC\ROHS\PSE\UN38.3 等国际认证，顶尖的设计加上成熟的生产
管控，产品安全可靠，可以通过太阳能发电，车载发电，市电充电，产品具有重量轻、体积小、功
率大等特点，为客户提供便捷的移动能源。产品主要特点有：
AC100V~240V/50~60Hz 纯正弦波输出（根据各国家或地区的电力标准设定）
太阳能 MPPT 充电系统
自动适应适配器市电充电

18
车载充电
12V12A车载点烟器输出
12V5A DC5.5 端口输出*2
USB-C PD 60W/5~20V输出
USB -A QC3.0 18W/5~12V输出
USB -A 2.4A 智能识别输出*2
给汽车启动电池充电，辅助启动汽车
90%-97%高转化效率（减少发热，同时提升实际输出能量）
Led 高亮显示屏（实时功率、电量、剩余时间等指示）
Led 高亮照明灯（低亮，高亮，SOS，快闪四种模式）
BMS 多级保护系统
智能识别设备功率，精确显示剩余使用时间
具有过充、过放、高低温、多级过流、短路等保护功能
超长循环寿命，大于 800 次循环
无风扇设计，产品静音，更安全
高能量转换效率，用户将使用到更多的实际容量
工业级铝合金外壳喷砂氧化处理
产品可满足大部分家用电器设备供电需求，例如电饭锅、小型冰箱、音箱、电视机、手机、电
脑、数码相机、平板电脑、Led 灯、应急灯、户外照明、户外施工、电动工具、水泵、医疗设备等
等。包含很广的运用领域，例如：抢险救灾、应急救援、急救、挖掘、装修、施工、旅游、露营、
太阳能发电等领域。

19
3．产品图示
3.1 产品面板功能介绍
序号 功能描述
1 显示屏幕 7 QC3.0 输出端口
2 DC 开关 8 USB C PD3.0 60W输出端口
3 DC5.5 输出 12V端口 9 USB 5V2.4A输出端口
4 Led 照明灯 10 AC 开关
5 点烟器端口 11 AC 输出端口
6 DC 充电端口 12 Led 开关