POOCH SNOOZE SS08 600D User manual

ELEVATED PET BED
ASSEMBLY GUIDE
Whilst every effort has been made to ensure this guide contains
the correct instructions and operating procedures, please visit our
website to ensure you have the latest product information and
instructions by scanning the QR code or visiting:
www.poochsnooze.com/elevated-dog-bed-instruction-manual
Thank you for purchasing the
Pooch Snooze Elevated Pet Bed.

Sold separately to match your Pets size & preference.
Please ensure weight guidelines are followed per
Pooch Snooze Elevated Pet Bed
For other related products, visit
www.poochsnooze.com
105cm
75cm
20cm
7.8”
41“
29.5” 125cm
85cm
20cm
7.8”
49”
33.5”
75cm
55cm
20cm
29,5”
21.5“
7.8”
90cm
65cm
20cm
7.8”
35.5”
25.5”
80kg / 176lbs
Extra
Large
WEIGHT
60kg / 132lbs
Large
WEIGHT
20kg / 44lbs
Small
WEIGHT
40kg / 88lbs
Medium
WEIGHT

This package contains everything you
need to assemble your new pet bed
POLE 3
POLE 2
POLE 1
COVER
POLE 4
LEG LEG
THIS PACKAGE CONTAINS EVERYTHING YOU NEED TO ASSEMBLE YOUR NEW PET BED
L1 L2
LEG LEG
L3 L4

1. Placeallitemsonoorasshownindiagram
1. Place all items on oor as shown in diagram
POLE 1
LEGS
COVER
POLE 2
SLEEVE 1 SLEEVE 4
SLEEVE 2
SLEEVE 3
POLE 3 POLE 4
L3
L4 L1
L2
2a. Thread Pole 1 Through Sleeve 1
2b. Thread Pole 2 Through Sleeve 2
POLE 2
POLE 1
POLE 1SLEEVE 1
POLE 2
SLEEVE 2
L3
L4 L1
L2
POLE 2
POLE 1
POLE 1SLEEVE 1
POLE 2
SLEEVE 2
L3
L4 L1
L2
POLE 2
POLE 1
POLE 1SLEEVE 1
POLE 2
SLEEVE 2
L3
L4 L1
L2

POLE 3
SLEEVE 3
SLEEVE 4
POLE 4
L3
L4 L1
L2
3a. Thread Pole 3 through Sleeve 3
3b. Thread Pole 4 through Sleeve 4
4. Insert Pole 4
into Cap End.
Repeat procedure
with Pole 3.
Swivel into place &
Press on Cap End

5. Connect Legs L1 & L2 to Poles 1 & 2.
6a. Connect Leg L3 into
Pole 2 & Pole 3.
6b. Connect Leg L4
into Pole 1 & Pole 4.
Roll into place & Press on Cap
The last connection
will be a bit tight, it
is designed as such to
ensure the cover is tightly
tted.RollCapEndinto
the end of the remaining
Pole.

7. Once all legs are connected, place the pet bed on its side and press rmly on each of Leg Joints.
7a. Once all legs are connected, place the Pet Bed on its side and
pressrmlyoneachoftheCapEnds.
7b. Rotate the bed
180˚&pressrmly
on Cap Ends.
8. Place on a level
surface and out of
common walking paths.
We hope that your pet enjoys this product.

1. Hold horizontally
on level surface and
place foot over Leg 1
2. While pressure is on Leg 1, lift
to disengage the plastic connector
&rmlypushtheframetowards
theooruntilleg1isdiconnected
To disassemble the pet bed, follow these prompts.
These actions should be performed with maximum caution
3. Carefully remove
Poles from Cap Ends
4. Remove all Poles
from the cover
1
3
2
4

5. Carefully remove
Legs L1 & L2 from
Poles 1 & 2
6. Line the poles up
on top of the empty
cover
7. Roll up the cover and
place into packaging
5
7
6

Max KG
COVER SPECS : SS08 600D
How to care for the Pooch Snooze Elevated Pet Bed
Use this product with caution
and at your own risk
DO NOT
TUMBLE DRY
DON’T SOAK
NO BLEACH
COOL IRON
COLD WATER
HAND WASH
Fibre Composition 100% polyester
Construction 1/1 114*47
Shrinkage Max 3%
Colour fastness to washing Min 4
Yarn Filament 600D*300

www.poochsnooze.com