Poolspa SPA Series User manual

SPA PREPLUMBED
Version with 32 jets
Product Card

2
Dear customers,
Thank you for trusting us and buying our product!
The ROCA POOL-SPA company, one of the leaders in the European hydromassage bath market, has been offering
its world class quality products for many years. The endurance, reliability and safety of our baths has always been of
greatest importance to us; that is why we always use materials and devices from reputable suppliers.
The manual will help you learn about the bath installation and its use. In this way, you will be able to use the bath without
any problems for many years to come. Have a great time and enjoy our baths!
Have a great time and enjoy our SPAS!

3
1. SAFETY RULES
SPA bath will be supplied to the customer in an original packaging. Remove the packaging and carefully check the SPA
bath before use. Notify your dealer about noticed discrepancies, if any.
It is prohibited to lift the bath by the piping.
Always put the bath on the feet. Do not let it rest on the side wall.
Make sure that the bath is properly secured if the installation work is carried out in the close
vicinity.
Connection of the electrical system to the network and connection of the fittings to the water line should be carried out
by authorized professionals.
2. PREPARATION OF THE INSTALLATION SITE
- The SPA bath can be used both in closed or open rooms.
- It should be placed on a hard, levelled floor to prevent the device from sinking and ensure proper operation.
- If the SPA bath is to be located in a closed room, make sure that enough space is provided to move the bath into the
room.
- The dimensions of the bed plate the SPA bath is to be installed on should allow the installer to properly arrange the
feet, conduits and cables (including sufficient access).
- Bear in mind the SPA bath emptying method.
- Pay attention to the material of the walls and the ceiling as they should be resistant to water steam produced during
the SPA bath operation.
- In view of possible water splashing during the use of the SPA bath, the floor has to be made of a highly water resistant
material such as tiles or plastic coats. Where a floor covering is used, it has to be adequately protected from bacteria
which may develop in a moist environment. Use special rugs or coverings used in yachting. Parquet floors or any other
wooden floors are nor recommended unless they have been appropriately processed as in the case of wood used in
gardening or outdoor structures.
3. INSTALLATION OF THE BATH AND THE ADDITIONAL ACCESSORIES
- To ensure proper operation of the SPA bath, install it on a firm and carefully levelled floor (providing for the drain slope),
e.g. on a 10 cm thick cement slab to prevent the bath from sinking.
- Once the bath height is defined, prepare a cement block to rest the feet.
- The dimensions of the hollow and the cement block must be sufficient for the installer to properly arrange the feet,
piping and the cables.
- Fasten the feet to the cement block so that they cannot move by accident.
- All the connections between the optional equipment and the bath have to be made by gluing the pipes and the fittings.
Metal pipes must not be used.
- Fill the bath with water to make sure the connections are tight.
- Do not fill the hollow around the bath with any materials as the access to all the pipes and connection points has to be
maintained.
-It is recommended to install a floor drain in the bath installation area below the bath level.

4
4. LIGHTING
The light switch must be provided by the customer.
The light colour changes in a sequence.
Colourful spotlight settings:
- Slow colour: Colours transition gracefully from colour to colour, cycling through the entire colour wheel. Each colour
cycle lasts approximately 3 minutes.
- Fast colour: Colours transition from colour to colour, cycling through the entire colour wheel. Each colour cycle lasts
approximately 1 minute.
- Slow random colour: Colours step or jump from one colour to the next in random order. Each colour duration lasts
approximately 10-15 seconds.
- Fast random colour: Colours step or jump from one colour to the next in random order. Each colour duration lasts
approximately 5 seconds.
- High speed random colour: A rapid series of intense flashes of varying coloured light.
- Cross fade: Colour cycle back and forth gracefully between blue and green. Total cycle lasts 1 minute.
- Fixed colour: Static display of a single colour. Available colours include green and blue.
Colourful multi-point light settings:
6 brilliant colours and 4 colour transition programs
- Tidal fade. Cool colour mix, slow transitions between green and blue tones.
- Afterburner Fade. Warm colour mix – slow transitions between red and orange tones.
- Spectrum Slowdance. Slow transitions between all six colours.
- Colour Burst. Fast strobe through all six colours.
5. TYPES OF JETS
Mini directional jet - PD1000250
Rotary jet - PD1000258
Rotary jet - PD1000306

5
WARRANTY FOR SPA
Our company, ROCA POOL-SPA Sp. z o.o., guarantees its products against all manufacturing or operational defects
under the conditions set out here.
After installing the Preplumbed Spa, please fill with installer in manual the card with the details requested to ensure
validity of warranty. Please remember to get from sales agent confirmation of purchasing date.
1. The semi product must be installed strictly in accordance with the installation instructions and respecting all the
measurements and indications of local installation’s rules.
2. For the warranty to be operative, all work done during the warranty period must be carried out by a authorised service.
The list of authorized service is available by Your sales agent.
3. The warranty period.
ROCA POOL-SPA Sp. z .o.o. provides special guarantee for acrylics layer of the Preplumbed Spa for a period of 7 years
from the date of production. And provides a full guarantee for the Preplumbed Spa for a period of 2 years from the date
of sales. During this full guarantee period, any manufacturing or operating defect will be repaired at no cost to the user
(excluding the bulbs, faults of installation, etc).
After 2 years from the date of sales, ROCA POOL-SPA Sp. z o.o. provides post-warranty payable service.
4. The warranty will not be valid in these cases:
a) A fault or faulty operation resulting from anomalies or non-compliance with the product-specific installation rules or
arising in the hydraulic systems.
b) Corrosion, scaling or abrasion caused by a lack of cleaning and/or maintenance, improper use, careless storage or ill
treatment, breakages, damage resulting from the use of water at temperatures of over 50ºC, wear from abnormal usage,
or any other cause not stemming from the appliance.
c) If the Spa, after use, is not secured by thermal cover against sun radiance.
d) If installation has been done by non-authorised service, or if non-original spare parts were used.
e) If it is found that the Spa has been in use for a period longer than the warranty period.
5. In particular, ROCA POOL-SPA Sp. z o.o. declines all liability for any harm to people or damage to things that may
have resulted from any of the excluded causes specified in the preceding section.
6. Any other demand stemming from grounds not specified in the above sections is excluded unless the law of the land
expressly attributes liability.
Roca Pool-Spa Sp. z o.o.
ul. Wyczółkowskiego 20, 44-109 Gliwice
tel.: [phone]
www.roca.pl, e-mail: [email protected]
DziałSerwisu
tel.: [phone]
fax: [phone]

6

7
MODEL
FACTORY NUMBER
DATE OF PRODUCTION AND TESTING
TECHNICAL PRODUCT SHEET
QUALITY CONTROL

16.07.2015
PI3000080
ROCA POOL-SPA company has the policy of constant improvement of products
and reserves the right to introduce changes to the specification and colours without
a prior notification. However, ROCA POOL-SPA makes all efforts to ensure that the
specifications are updated on the date of publishing.
ROCA POOL-SPA Sp. z o.o.
ul. Wyczółkowskiego 20,
44-109 Gliwice
tel. + 48 32 339 41 00
www.roca.pl,
e-mail: [email protected]