popstrukt Breve User manual

ASSEMBLY
INSTRUCTIONS
Breve
Coffee table

ASSEMBLY
INSTRUCTIONS
First of all, don’t panic, we’ve got you covered with simple step by step instructions to help you pop-up
your new piece painlessly. We know a sack of bolts looks daunting but lets start with the basics.
The Basics.
Tools Required
The Process
2m2
1 2 3
ASSEMBLY RATING:
ASSEMBLY TIME: 90 minutes
PEOPLE REQUIRED:
READY TOOLS
HANDYMAN
SEPERATE
SCREWS
LAY OUT PIECES
THEN SORT PIECES
- Do this on a carpet
FOLLOW
INSTRUCTIONS
MAKE SPACE
2m x 2m
OPEN
PACKAGE
12 3
4
6
5
4
5
Handyman
or

x12
2A/3A
ASSEMBLY
INSTRUCTIONS
If you are really struggling with this build please contact us so that we can get in touch
and help resolve the problem with you.
EMAIL: [email protected]
SUBJECT : Assembly (Send pics if need be)
The Breve comes in flatpack. You will have to mount the base, then assemble the trunk onto the base section
before placing the lid onto the unit and finally assembling and installing the drawers..
Supplied
Overview
Contact
Please keep all the packaging for 14 days, and try not to damage it as you will need it if you
want to return the piece. See our Return Policy on our website for further information on returns.
NOTE
AMOUNT
AMOUNT
STEP
x24
x4
x6 x12
25
x16
1A 1B 4A
STEP
x24
2A/3A
2C/3C
4B
4030

ASSEMBLY
INSTRUCTIONS
Fix Base and feet to bottom.
- Do this on a carpet or soft suface.
1HARDWARE 1A + 1B
1A - Place the base on the bottom side of the base board. Note that the bottom piece (base baord)
is a mirror image of the top board. The existing holes should face away from the face you are mount-
ing onto. Also make sure the base is center using a measuring tape, you can eyeball it but we don’t
recommend this.
1B - Fix the legs to the base as illustrated using three screws per leg as
shown.
1B

ASSEMBLY
INSTRUCTIONS
Assemble trunk.
- Insert and tighten fasteners. HARDWARE 2A - 2C
2
The trunk assembly requires some focus and remember to think ahead when putting the pieces
into place.
Step 2A - Insert all the fastner screws and dowels on all 5 pieces starting with the base board.
Step 2B - Interlock the pieces.
Step 2C - Make sure all the pieces are inserted correctly (See steps 3 and 4) then insert and
fasten fastening caps, this step will pull all of the boards together tightly.
2A
2C
2B
2B
2B

3
ASSEMBLY
INSTRUCTIONS
HARDWARE 3A - 3C
Insert lid onto trunk base.
Step 3C will tighten lid.
Step 3A - Insert all of the tightening screws into the lid.
Step 3B - Place the lid onto the trunk base. You can manipulate the srews and dowels to fit.
Step 3C - Insert and fasten all the tightening caps. Do this seperately for the base and top.
3B
3C
3B
3A

ASSEMBLY
INSTRUCTIONS
Assemble Drawers
- Use of powertool recommended.
4HARDWARE 4A + 4B
4A - Assemble the drawers one corner at the time by aligning the pre drilled holes. The drawer
stopper should face the handle side.
4B - Attach handle/front boards. Don’t tighten yet as this can be done at the end when to ajust posi-
tion
4B
4A
NOTE: make sure the drawer screws
are countersunk to prevent them from
catching on the rails.

ASSEMBLY
INSTRUCTIONS
Insert Drawers
5HARDWARE 5A
5 - The drawers are simply inserted into the sliding rails and pushed in all the way to the back untill
you hear a click. The drawers might move with friction at first but opeing and closing them repeat-
edly will improve the smoothness. Also make sure the drawer screws are countersunk to prevent
them from catching onto the rails. See step 4A.

ASSEMBLY
INSTRUCTIONS
Adjust drawer height and friction.
- Use hand tools.
6HARDWARE 6A
7A - The drawers can be adjusted by moving the drawer screws to the vertical slots, do this one by
one and before tightening them make sure the hight is correct.
6

ASSEMBLY
INSTRUCTIONS
YOU’RE ALL DONE, ENJOY!
7
Popstrukt Furniture @Popstrukt_com @popstrukt_com Popstrukt Furniture
Share a pic of your new piece.