popstrukt Doppio Media Unit User manual

ASSEMBLY
INSTRUCTIONS
Doppio Media Unit
TV Media Unit

ASSEMBLY
INSTRUCTIONS
First of all, don’t panic, we’ve got you covered with simple step by step instructions to help you pop-up
your new piece painlessly. We know a sack of bolts looks daunting but lets start with the basics.
The Basics.
Tools Required
The Process
2m2
1 2 3
ASSEMBLY RATING:
ASSEMBLY TIME: 120 minutes
PEOPLE REQUIRED:
READY TOOLS
HANDYMAN
SEPERATE
SCREWS
LAY OUT PIECES
THEN SORT PIECES
- Do this on a carpet
FOLLOW
INSTRUCTIONS
MAKE SPACE
2m x 2m
OPEN
PACKAGE
12 3
4
6
5
1
5
3
5
Handyman
or
and

ASSEMBLY
INSTRUCTIONS
If you are really struggling with this build please contact us so that we can get in touch
and help resolve the problem with you.
EMAIL: [email protected]
SUBJECT : Assembly (Send pics if need be)
The Flat White comes in flatpack. You will have to mount the base, then assemble the shelving,
before assembling and installing the drawers followed by the istallation of the doors.
Supplied
Overview
Contact
Please keep all the packaging for 14 days, and try not to damage it as you will need it if you
want to return the piece. See our Return Policy on our website for further information on returns.
NOTE
x8
AMOUNT
AMOUNT
STEP
x22 x18 x4
x16
15
x16 x4 x2
Share Package
14A
1
5
STEP
5
x18
2B/3A
2C/3B
2B/3A 4B
40
x4
*Metal screws
2B/3A

ASSEMBLY
INSTRUCTIONS
Fix feet to base.
- Do this on a carbet or soft suface.
1HARDWARE 1
1A - Place the feet on the bottom side of the lower shelf. Note that the bottom piece and top piece
are identical. The existing holes should face away from the face you are mounting onto. You can use
a measuring tape or simply eyeball the feet spacing.
1
No pre-drilled holes.
Make use of selftapping screws provided.

ASSEMBLY
INSTRUCTIONS
Assemble trunk.
- Insert and tighten fasteners. HARDWARE 2A - 2C
2A
2C
2
Use 2 metal cam screws on the mid
section to mount onto base and lid.
Remember the pre-fixed rails should be closest to the base.
Step 2A - Assemble the mid section first and then blace mid section onto base.
Step 2B - Insert cam screws and dowels into base.
Step 2C - Place mid section onto base and interlock the pieces. Remember that some cam
screws will be behind the rails, this will not affect the structural integrity of the product.
NOTE: STEP 2B and 3A MAKES USE OF THE 4 METAL CAM SCREWS AS SHOWN
2C
2B

3
ASSEMBLY
INSTRUCTIONS
3A
HARDWARE 3A + 3B
Apply lid to Base/Mid Section
Step 3A - Insert cam screws and dowels into lid.
Step 3B - Place lid onto mid section and tighten cam screws.
Use 2 metal cam screws on the mid
section to mount onto base and lid.
3B

ASSEMBLY
INSTRUCTIONS
Assemble Drawers
- Use of powertool recommended.
4HARDWARE 4A + 4B
4A - Assemble the drawers one corner at the time by aligning the pre drilled holes. The drawer
stopper should face the handle side.
4B - Attach handle/front boards. Don’t tighten yet as this can be done at the end to adjust position.
4B
4A
NOTE: make sure the drawer screws
are countersunk to prevent them from
catching on the rails.

ASSEMBLY
INSTRUCTIONS
5
Fix feet to Bench.
- Do this on a carbet or soft suface.
5HARDWARE 5
5 - Position the steel feet over the holes provided on bottom of bench. Curve on steel feet should
face inward and insert all screws before tightning.

ASSEMBLY
INSTRUCTIONS

ASSEMBLY
INSTRUCTIONS
YOU’RE ALL DONE, ENJOY!
6
Popstrukt Furniture @Popstrukt_com @popstrukt_com Popstrukt Furniture
Share a pic of your new piece with us.