Portech IS-640P User manual

IP Speaker
IS-640P
User manual

2
【Content】
1. Introduction ................................................................................................. 1
2. Parts list ....................................................................................................... 1
3. Panel description ........................................................................................ 2
4. Web Page Setting ........................................................................................ 3
5 Network ........................................................................................................ 5
5.1 Network Status ..................................................................................... 5
5.2 WAN Setting ...................................................................................... 5
6. SIP Setting .................................................................................................. 6
6.1 Service Domain ...................................................................................... 6
6.2 Port Setting ............................................................................................. 7
6.3 Codec Setting ......................................................................................... 7
6.4 Audio Setting ........................................................................................... 8
6.5 ther Setting ........................................................................................... 9
7. S UN Setting ............................................................................................. 10
8. Update ........................................................................................................ 11
8.1 New Firmware ....................................................................................... 11
8.2 Default Setting ...................................................................................... 13
9. System Authority ...................................................................................... 14
10. Save Change ........................................................................................... 14
11. Reboot ..................................................................................................... 15

1
1. Introduction
IS-640P IP Speaker provide a user-friendly control and simple
voice broadcasting. Theproduct is designed to provide easy use for any
office,department store,factory,school to be able to quickly broadcast
announcements to their any assigned office or branch orclasses (or a group of
office or branch or classes) .
2. Parts list:
2.1. IP Speaker(IS-640P) main body : DIM: (L) 16.7 X (W) 24.2 X (H) 28 cm
2.2. User manual

2
3. Panel description
3.1 LAN port : RJ-45 network port(PoE) ; connected to PoE Injector through
network cable.P+D/ UT port conducts network connection and
power supply

1
3.2 Power :
1. light turn off : no power
2. light turn on : standby
3.3 Status :
1. light turn off : standby
2. light turn on : call in status
3. light twinkle : user is speaking
3.4 IP Reset Button : please press the button in 7-8 seconds till the status led
flash blink to restore the factory default
4. Web Page Set ing
Step 1: Browse the IP address http://192.168.0.100 from Internet Explorer
Step 2: Please enter the username and password for authentication. (default
username: voip，Password: 1234). The page follows when the
username and password are correct

4
Step 3: When you login the web page,you can see current System Information
like Model Name,Firmware Version,Codec, Version .etc in this page.
You also can see the function lists in the left side
Include Network ,SIP Setting,STUN Settings, Update,System Authority,Save
Change , Reboot .
4.1. Network : provide Status,WAN Setting
4.2.SIP Settings : Provide Service Domain
Port Setting (SIP and RTP port setting),Code Setting,Audio Setting, ther
Setting
4.3. STUN Setting : provide STUN Setting to penetrate the Firewal。
4.4. Update : provide New Firmware (firmware upgrade),Default
Settings (restpre default setting).
4.5. System Authority : provide user to change login name and password.
4.6.Save Change :Save the changes you have done
4.7.Reboot :Restart the system.。

5
5 Network
5.1 Network Status
Network Status: you can check the current Network Setting in this page
5.2 WAN Setting
(1) The TCP/IP Configuration item is to setup the WAN port’s network
environment. You may refer to your current network environment to
configure the system properly.
(2) The PPPoE Configuration item is to setup the PPPoE Username and
Password. If you have the PPPoE account from your Service Provider,
please input the Username and the Password correctly.
(3) When you finished the setting, please click the Submit button.

6
6. SIP Set ing
6.1 Service Domain
In Service Domain Function you need to input the account and the related
informations in this page, please refer to your ISP Provider. You can
register three SIP accounts.
field
explain
Realm 1 (Default)
Active
Default: ff , on: active this account
Display Name
you can input the name you want to
display
User Name
you need to input the User Name get from your ISP.
Register Name
you need to input the Register Name get from your ISP.
Register Password
you need to input the Register Password get from ISP.
Domain Server
you need to input the Domain
Server get from your ISP.
Proxy Server
you need to input the Proxy Server get from your ISP
utbound Proxy
you need to input the utbound Proxy get from your ISP. If
your ISP does not provide the information,then you can
skip this item.
Status You can see the Register Status. Not Register(register
fail)，Register(register successful)。
When you finished the setting,please click the Submit button. Remember to
click “Save Charge”

7
6.2 Port Setting
You can setup the SIP and RTP port number in this page. Each ISP provider
will have different SIP/RTPport setting, please refer to the ISP to setup the port
number correctly. When you finished the setting, please click the Submit button
and “Save Charge”
6.3 Codec Setting
You can setup the Codec priority, RTP packet length in this page. You need to
follow the ISP suggestion to setup these items. When you finished the setting,
please click the Submit button and “Save Charge”.

8
6.4 Audio Setting
Set speaker volume and voice detect function
Field
description
Speaker Volume
Default:50,maximum: 64 , minimum: 0.
Detection Sensitivity
Default:32,maximum: 32 , minimum: 0
Report to Host Default: FF; N:send Voice detection packet to Host
Server , FF:don’t send Voice detection packet to Host
Server.
Host Server
setHost Server IP Address.
Rx Host IP only Default: FF; N:only accept receiving Host Server’s
packet , FF:accept receiving other ip address’s packet
except for Host Server
RTP Timeout Default:10 seconds; set xx seconds that don’t receive
RTP Packet from Host Server, device will be auto back to
stand-by status
When you finished the setting, please click the Submit button and “Save
Charge”.

9
6.5 Other Setting
SIP Expire Time: Default:60; set register’s time interval ;range:30~86400 sec
When you finished the setting, please click the Submit button and “Save
Charge”.
[CutLine]: when click this button,device will break off current broadcast
procedure and back to stand-by status.

10
.STUN Set ing
you can setup the STUN Enable/Disable and STUN Server IP address in this
page. This function can help your VoIP device working properly behind NAT. To
change these settings please following your ISP information. When you
finished the setting, please click the Submit button.

11
8.Update
In Update you can update the system’s firmware to the new one or execute the
factory reset to let the system back to default setting.
8.1 New Firmware
Field
Description
Code Type Default:Risc (.gz). Provide Risc (system firmware.gz) and DSP
(DSP firmware.ds).
File Location Click the “Browse” button in the right side of the File Location or
you can type the correct path and the filename in File Location
blank.
Setep 1: choose UpdteNew Firmware，choose Code Type: Risc and click the
“Browse” button in the right side of the File Location or you can type the
correct path and the filename in File Location blank.

12
Setep 2:choose [gz] file ,then click [open].
Setep 3:[File Location] will show the file location and file name. after
confirm ,please click submit
Setep 4: please don’t turn power off when system updating. It is important.
The updating time is about 3 minutes.
Setep 5: After finished update firmware,please click Refresh (F5),then you can
set other settings

13
8.2 Default Setting
In this page: Update/ Default Settings, you could restore the factory default
settings to the system. All setting will restore default setting.
IP will retain original IP as usual not default IP.
Step1: choose UpdateDefault Setting. When you want to restore default
setting,please click [Restore]. You can clear all settings and auto refresh
as follows.
Setep 2:please wait for a moment while rebooting as follws.
Setep 3: After reboot, webpage will be back to main page. Please click
refresh(F5) ,then you can set other settings

14
9.System Authority
In System Authority you can change your login name and password.
When you finished the setting, please click the Submit button and “Save
Charge”.
10. Save Change
In Save Change you can save the changes you have done. If you want to use
new setting in the VoIP system, you have to click the Save button. After you
click the Save button, the system will automatically restart and the new setting
will effect.

15
11. Reboot
Reboot function you can restart the system. If you want to restart the system,
you can just click the Reboot button, then the system will automatically.
Please don’t turn power off while rebooting,thanks
After reboot, webpage will be back to main page. Please click refresh(F5) ,then
you can set other settings