POSIFLEX CR-3100 User manual

Assembly Disassembly Guide
1
CR-3100 Series

Assembly Disassembly Guide
2
Table of Contents
Maintenance precautions..............................................................................................3
Preventive maintenance ................................................................................................3
Tools...............................................................................................................................4
Screws List......................................................................................................................4
Replacing Control Mechanism .......................................................................................5

Assembly Disassembly Guide
3
Maintenance precautions
-Recommend to use the absolute alcohol for wiping & cleaning.
-NOT recommend to use naphtha and strong corrosive solvents (e.g. with
Ammonia, formaldehyde, acetone… included) for cleaning.
Preventive maintenance
Maintenance items: dust, mildew, water vapor, oil stains, oxidation.
-Keep the operation environment with normal humidity & clean every day.
-Remove the dust buildup on the host terminal every month
-Clean the dirt/dust insides the terminal every year.

Assembly Disassembly Guide
4
Tools
Screwdriver
Type
Specification
Photo
┿
Crosshead
Screwdriver
Point #2
Screws List
Parts No.
Specification
Photo
10684038062
BING HEAD SCREW#6/32-6L W/SW+W

Assembly Disassembly Guide
5
Replacing Control Mechanism
Turn the key to the “Open” position as
indicated in the picture, then open the
cash drawer.
Remove the cash tray as picture shown.
Remove the cash drawer as indicated in
the picture.

Assembly Disassembly Guide
6
Bend the two ends of the iron to make
them ~90 degree to the iron strip while
removing them as indicated in the
picture.
Remove the bottom cover by following
the direction as indicated in the picture.
Loosen the four screws as indicated in
the picture. Then remove the whole
control bracket.
Screwdriver ┿
Loosen the four screws as indicated in
the picture. Then remove the whole back
plate.
Screwdriver ┿

Assembly Disassembly Guide
7
Change a new control mechanism
Install the new back plate first than
fasten the four screws as indicated in the
picture. P/N:10684038062
Take the “2mm”thickness measured tool
with you.
Install the new control bracket first. Then
insert the 2mm measured tool to the gap
between the main chassis and control
bracket as indicated in the picture.

Assembly Disassembly Guide
8
Fasten the four screws as indicated in the
picture. P/N:10684038062
Install the bottom cover by following the
direction as indicated in the picture.
Install the iron sheets first then bend the
two ends to fix the bottom cover.
Install the cash drawer to the main unit
as picture shown.

Assembly Disassembly Guide
9
Insert the cash tray as picture shown.
Done!