pottery barn kids EMERY User manual

Date: 2014-October-24
Rev: Page 1/7
pottery barn kids
EMERY TODDLER BED CONVERSION KIT
www.potterybarnkids.com

Date: 2014-October-24
Rev: Page 2/7
WARNING ENTRAPMENT/STRANGULATION
HAZARD:
 Infants have died in toddler beds from entrapment and strangulation.
 Failure to follow these warnings and assembly instructions could result in serious injury or death.
 NEVER use bed with children under 15 months.
 NEVER place bed near windows where cords from blinds or drapes may strangle a child.
 Read all instructions before assembling toddler bed. KEEP INSTRUCTIONS FOR FUTURE USE.
 DO NOT use a water mattress with this toddler bed.
 Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
 DO NOT place bed near windows where cords from blinds or drapes may strangle a child.
 Do not place items with a string, cord, or ribbon around the child’s neck, such as hood strings or pacifier cords.
 Do not suspend strings over a toddler bed or attach strings to toys.
 If refinishing, use a non-toxic finish specified for children's products.
 If included, always use guardrail(s).
CAUTION: ANY MATTRESS USED IN THIS TODDLER BED MUST BE AT LEAST 27 ¼" (69 CENTIMETERS) BY 51
5/8" (131 CENTIMETERS) WITH A THICKNESS NOT EXCEEDING 6" (15 CENTIMETERS) BUT AT LEAST 4” (10
CENTIMETERS).
THIS BED IS FOR CHILDREN OVER 15 MONTHS OF AGE WEIGHING NO MORE THAN 50 POUNDS (22.7 kg).
04-000032-6
IMPORTANT SAFETY INSTRUCTIONS:
 Please read all instructions carefully before assembling.
 For your safety, assembly by two or more adults is recommended.
 Keep instructions for future use.
 Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural
integrity of the item.
 Do not remove warning labels from the crib. Labels are permanent and not designed to be removed.
PRE-ASSEMBLY:
 Remove all parts and hardware from the box and place them on a carpet, or scratch-free work surface, as this will
avoid damaging parts during assembly. The shipping box provides an ideal work surface.
 To avoid accidentally discarding small parts or hardware, do not dispose of any packaging or contents of the
shipping carton until assembly is complete.
 Use the parts and hardware lists below to identify and separate each of the pieces included.
 The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
 The use of power tools to aid in assembly in not recommended. Power tools can damage hardware and split wood.

Date: 2014-October-24
Rev: Page 3/7
PARTS INCLUDED:
CONVERSION KIT (1x)
HARDWARE REQUIRED (from Crib):
(A) Allen Key - 1x
1 x
(B) Bolt (M6 x 50mm) – 2x
2 x
(C) Bolt (M6 x 40mm) – 2x
2 x
(D) Bolt (M6 x 20mm) – 4x
4 x
(F) Half-moon Metal Block – 2x
CRIB PARTS:
EMERY CRIB (sold separately)

Date: 2014-October-24
Rev: Page 4/7
ASSEMBLY INSTRUCTIONS:
1. Lower the mattress base to Level 3 as seen in the illustration below.
2. Remove the Crib Assembly Instructions from the Tyvek envelope attached to the Crib Mattress Base. Review and
keep instructions for part and hardware description reference. If you cannot locate the crib Assembly Instructions,
please contact Pottery Barn Kids for another copy.
3. With the help of another adult, carefully turn the crib and place it on a scratch-free surface. Slightly loosen (DO
NOT REMOVE) the 2 Bolts (D) using Allen Key (A) so the Left & right Bracket can be rotated but kept in place, as
seen in the illustration below.
(D)
Bracket
4x

Date: 2014-October-24
Rev: Page 5/7
4. Use Allen Key (A) to remove the two Bolts (D) as seen in the illustration below.
*Note: Please keep the two bolts (D) for later use on Toddler bed assembly.
5. Lay down the side of the Mattress Base as seen in the illustration below.
6. Remove the Crib Side by removing 2 Bolts (C), 2 Bolts (B) and Half moon washer as shown in the illustration
below.
*Note: Please keep the 2 Half-moon washer (F), 2 bolts (B) and 2 bolt (C) for later use on Toddler bed
assembly.
(F)
Crib Side
Mattress Base
(A)
(D)

Date: 2014-October-24
Rev: Page 6/7
7. Attach the Conversion Kit to the Crib Ends by aligning pre-drilled holes with wooden dowels as shown in the
illustration below.
*Note: Do not fully tighten bolts (B&C) at this point.
8. Attach the mattress base back in place by Inserting the 2 Bolts (D) as shown in the illustration below.
(A)
(D)
B
2 x
2x
C
2 x
1x
F
4
2x
(C)
(B)
(F)

Date: 2014-October-24
Rev: Page 7/7
9. Tighten the 2 Bolts (D) as shown in the illustration below. With the help of another adult, stand the assembled
unit upright.
10. Check alignments and fully tighten all connections at this time.
11. Assembly is now complete.
12. Place the assembly instructions back into the envelope mounted on the mattress base for future reference.
CARE INSTRUCTIONS
 Dust often using a clean, soft, dry, lint-free cloth.
 Blot spills immediately, and wipe with a clean, damp cloth.
 We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.
 If the crib is to be stored, store in cool dry place and carefully package all original hardware to protect from loss or
damage.
 Check fasteners periodically for tightness. DO NOT over tighten, as this may cause distortion or breakage.
 Parents should ensure a safe environment for the child by checking the crib regularly that every component is
properly and securely in place, before placing the child in the product.
Thank you for your purchase.
stores | catalog | www.potterybarnkids.com
USA 1.800.290.8181
(D)