pottery barn kids DOUBLE MARKET BIN User manual

Date: 2015-AUG-28 Page 1 of 5
Rev:
pottery barn kids
DOUBLE MARKET BIN
www.potterybarnkids.co

Date: 2015-AUG-28 Page 2 of 5
Rev:
Important Safety Instructions:
• Please read all instructions carefully before asse bling.
• For your safety, asse bly by two or ore adults is strongly reco ended.
• Keep instructions for future use.
• Use only vendor supplied hardware to asse ble. Using unauthorized hardware could jeopardize the structural
integrity of the ite .
Pre assembly:
• Re ove all parts and hardware fro the box and lay out on a clear carpeted or scratch-free work surface, as
this will avoid da aging parts during asse bly. The shipping box provides an ideal work surface.
• Do not dispose of any packaging or contents of the shipping carton until asse bly is co pleted to avoid
accidentally discarding s all parts or hardware.
• Use the parts and hardware lists below to identify and separate each of the pieces included.
• The illustrations provided allow for easier asse bly when used in conjunction with the asse bly instructions.
• The use of power tools to aid in asse bly is not reco ended. Power tools can da age hardware and split
wood.
• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions ay cause the
bolts to isalign during asse bly.
Parts Included:
(A) Top Panel (1x)
(B) Left Side Panel (1x)
(C) Right Side Panel (1x)
(D) Botto Panel (1x)
(E) Front Rail (1x)
(F) Back Panel (1x)
Hardware Included:
(G) Allen Key – 1x
(H) Bolt 1/4”x25 – 6x
(I) Bolt 1/4”x38 – 4x
(J) Spring Washer – 10x
(K) Flat Washer – 10x (L) Half-Moon Metal Block– 4x
(M) Mending Plate – 2x
(N) Machine Screw 5/32”x12 – 4x
Tools Required:
Philips Head Screwdriver
(not included)

Date: 2015-AUG-28 Page 3 of 5
Rev:
Assembly Instruction Steps:
1. Attach (B) and (C) to (D) as shown below. Do not fully tighten.
2. Attach (E) to the asse bled piece as shown below. Do not fully tighten.
I 4x
J 4x
K 4x
L 4x
H 2x
J 2x
K 2x
4X
2X

Date: 2015-AUG-28 Page 4 of 5
Rev:
3. Attach (F) to the asse bled piece as shown below.
4. Attach (A) to the asse bled piece as shown below.
5. Check align ents and tighten all bolts at this ti e. Do not over tighten.
6. NOTE: Installation of the Anti Tip Kit is REQUIRED. Please follow the separate instructions to secure the Unit to
the wall by using tipping-restraint kit included.
H 4x
J 4x
K 4x
4X

Date: 2015-AUG-28 Page 5 of 5
Rev:
7. When stacking, use Mending Plate (M) and Machine Screw (N) to secure. Using a Philips Head Screw
Driver. Do not over tighten.
Note: The arrangement of the Market Bin system units can be combined as shown below:
Care Instructions:
• Dust often using a clean, soft, dry and lint-free cloth.
• Blot spills i ediately and wipe with a clean, da p, cloth.
• We do not reco end the use of che ical cleansers, abrasives or furniture polish on our lacquered finish.
• Hardware ay loosen over ti e. Periodically check to ake sure all connections are tight.
Re-tighten if necessary.
Thank you for your purchase
Stores | catalog | www.potterybarnkids.co
USA 1.800.290.8181
M 2x
N
4x
2X