pottery barn kids OWEN User manual

Date: 2016-Jan.-23
Rev: Page 1 of 7
pottery barn kids
OWEN LOFT BED
www.potterybarnkids.com

Date: 2016-Jan.-23
Rev: Page 2 of 7
! WARNING: Failure to follow these warnings and assembly
instructions could result in serious injury or death. To help prevent serious
or fatal injuries from entrapment or falls:
•Read all instructions before assembling loft bed.
•Before each usage or assembly, inspect loft bed for damaged hardware, loose joints,
missing parts or sharp edges.
•DO NOT use loft bed if any parts are missing or broken.
•DO NOT use substitute parts. Contact pottery barn kids for replacement parts and
instructional literature if needed.
•Follow the information on the warnings appearing on the upper loft end structure and
on the carton. DO NOT REMOVE WARNING LABEL FROM BED.
•Always use the recommended size mattress or mattress support, or both, to help prevent
the likelihood of entrapment or falls.
•Ensure thickness of mattress on upper loft does not exceed 7inches and the surface
of mattress must be at least 5 inches (127 mm) below the upper edge of guardrails.
•Only use the 9" thickness mattress on the lower loft.
•Ensure both upper and lower loft are assembled to the highest position when using the
product as a loft bed.
•Use only mattress which is 74"-75" long and 37.5"-38.5" wide on upper and lower loft.
•Do not allow children under 6 years of age to use the upper loft.
•Periodically check and ensure that the guardrail, ladder, and other components are in their
proper position, free from damage, and that all connectors are tight.
•Do not allow horseplay on or under the bed and prohibit jumping on the bed.
•Prohibit more than one person on the upper loft.
•Always use the ladder for entering and leaving the upper loft.
•Use of a night light may provide added safety precaution for a child using the upper loft.
•Always use guardrails on both long sides of the upper loft. If the loft bed will be placed
next to the wall, the guardrail that runs the full length of the bed should be placed against
the wall to prevent entrapment between the bed and wall.
•The use of water or sleep flotation mattresses is prohibited.
•If refinishing, use a non-toxic finish specified for children's products.
STRANGULATION HAZARD -Never attach or hang items to any part of the loft bed
that are not designed for use with the bed; for example, but not limited to, hooks, belts
and jump ropes.
•This loft bed meets the requirements of ASTM F1427-13
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
04-0000217

Date: 2016-Jan.-23
Rev: Page 3 of 7
Important Safety Instructions:
•Please read all instructions carefully before assembling.
•For your safety, assembly by two or more adults is strongly recommended.
•Keep instructions for future use.
•Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural integrity
of the item.
•Do not remove warning labels from the loft bed. Labels are permanent and not designed to be removed.
Pre-assembly:
•Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface, as this will
avoid damaging parts during assembly. The shipping box provides an ideal work surface.
•Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid accidentally
discarding small parts or hardware.
•Use the parts and hardware lists below to identify and separate each of the pieces included.
•The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
•The use of power tools to aid in assembly is not recommended. Power tools can damage hardware and split wood.
•Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause the bolts to
misalign during assembly.
Parts Included:
(A) Headboard (1x)
(B) Footboard (1x)
(C) Side rail (1x)
(D) Long guard rail (1x)
(E) Short guard rail (1x)
(F) Slat roll (1x)
(G) Ladder (1x)
Hardware Included:
(H) Barrel nut M8
12x
(I) Long Allen bolt
M8x90 mm – 12x
(J) Short Allen bolt
M8x70 mm – 3x
(K) Allen key with ball tip
1x
(L) Flat head wood screw
4x30 mm – 28x
(M)Flat head wood screw
4x15 mm – 2x
Tools Required (not included):
Philips Head Screwdriver
F
G
C
E
A
B
D

Date: 2016-Jan.-23
Rev: Page 4 of 7
Assembly Instruction Steps:
1. Attach (C) to (A) as shown below.
Note: Do not fully tighten the bolts to make the next steps easier.
2. Attach (D) to (A) as shown below.
Note: Do not fully tighten the bolts to make the next steps easier.
H 2x
I 2x
H 2x
I 2x
J 1x
C
A
K
I
H
D
H
J
K
K
I
Step 1-2
Step 1-1
1X
1X
Step 2-2
Step 2-1
Step 2-3
1X
1X
1X

Date: 2016-Jan.-23
Rev: Page 5 of 7
3. Attach (B) to (C) and (D) as shown below.
Note: Do not fully tighten the bolts to make the next steps easier.
4. Carefully attach (E) to (A&B) by spreading (A& B) as shown below.
C
H 4x
I 4x
J 1x
Spread
Spread
A
B
E
J
B
C
D
I
K
H
K
2X
Step 3-1
Step 3-2
Step 3-3
1X
2X

Date: 2016-Jan.-23
Rev: Page 6 of 7
5. Secure (E) to (A&B) as shown. Do not fully tighten.
6. Check the alignments and fully tighten all bolts at this time. Do not over tighten.
7. Attach (G) onto (E). Secure the ladder with (M) using a Phillips head screwdriver (Not included).
Make sure to use pre-drilled holes as guidance.
M
2x
H 4x
I 4x
J 1x
A
B
E
J
K
H
K
I
E
M
G
Step 5-2
Step 5-1
2X
2X
1X
Step 5-3
2X
2X

Date: 2016-Jan.-23
Rev: Page 7 of 7
8. Check the alignments and fully tighten all bolts at this time. Do not over tighten.
9. Lay the slat roll (F) onto the support rails on the inner side of (D) and (E). Secure each slat by wood
screw (L) at two ends using a Phillips head screwdriver (Not included).
10. Assembly is completed.
Care Instructions:
•Dust often using a clean, soft, dry and lint-free cloth.
•Blot spills immediately and wipe with a clean, damp, cloth.
•We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
•Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if
necessary.
Thank you for your purchase
Stores | catalog | www.potterybarnkids.com
USA 1.800.290.8181
L 28x
G
L
28X