
深圳市倾玄科技有限公司 官方网址:http://www.pourxuan.com 联系电话:0755-36520843
System status indicator (flash: normal operation, extinguishing:
running error)
System power indicator (light: power is normal, put out: no
power input)
DVI optical fiber transmitter ………. 1 pc
DVI optical fiber receiver ……………. 1 pc
Fiber optic module TX/RX ………….. 1 set
USB TO USB-B line ………………………1pcs
Power adapter …………………………….2 pcs
User manual ………………………………. 1 pc
1、The DVI signal source access DVI optical transmitter,
2、The stereo audio access DVI optical transmitter,
3、The DVI transmitter receiver connected to a display device (such as high-definition
televisions, mosaic screen etc.),
4、The DVI optical receiver Output audio access audio equipment
5、Use LC interface fiber line to connect the transmitter and receiver of the optical fiber
interface,
6、Send the receiver and the receiver to the power supply, when the indicator light is normal,
the system runs normally.
7、EDID key uses, such as after connecting the transmitter POWER, RUN, LOCK lights, light
receiving full light, display no image or color, the electricity transmitter DVI and transmitter
monitor DVI port connection, press the EDID button until the OPT flashes, flashes stopped
repeat steps 1-6 to restart the power supply.