Power Lift 81045 Quick start guide

Assembly Notes :
Fasteners provided to assemble machine:
(26) 1/2"X3-1/2" BOLTS
(4) 1/2"X4-1/2" BOLTS
(2) 1/2"X4-3/4" BOLTS
(2) 1/2"X1-1/2" BOLTS
(8) 3/8"X1-1/2" FLANGE BOLTS
Tools required (Not Included):
- 3/4" Open-End Wrench
- 3/4" Socket
- 9/16" Open-End Wrench
- 9/16" Socket
- 1/8" Allen Wrench
Note: When assembling unit DO NOT
tighten any fasteners until specified.
Plate Loaded Leg Press
A
8/21/19
POWER LIFT
REV.
PART NUMBER
R
81045_assembly cover
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

11
3
2
20
23
21
22
STEP 2
Item #20
1/2"X3-1/2"
STEP 1
Item #20
1/2"X3-1/2"
STEP 1
Item #20
1/2"X3-1/2"
Hardware Detail
Instructions
1.) Assemble item 2 to both items 1 using (4) 1/2"X3-1/2" bolts
provided.
2.) Assemble item 3 to both items 1 using (4) 1/2"X3-1/2" bolts
provided.
Note: When assembling unit DO NOT tighten any fasteners
until specified.
Frame Detail
A 8/21/19
Item No. Part Number Part Name Qty
1 81046 SIDE FRAME 2
2 81052 MIDDLE CROSS BRACE 1
3 81076 FRONT CROSS BRACE 1
Item No. Part Number Part Name Qty
20 99520 1/2"X3-1/2" BOLT 8
21 99585 1/2" FLATWASHER 8
22 99620 1/2"-13 NUT 8
23 80010 PLATE, SPACER 8
POWER LIFT
REV.
PART NUMBER
R
81045_page1
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

5
1
788
4
1
6
20
21
22
STEP 3
Item #20
1/2"X3-1/2"
STEP 6
Item #20
1/2"X3-1/2"
STEP 4
Item #20
1/2"X3-1/2"
STEP 5
Item #20
1/2"X3-1/2"
20
21
21
22
20
21
21
22
A 8/21/19
Hardware Detail
Instructions
3.) Assemble items 4 to both of items 1 using (4) 1/2"X3-1/2"
bolts provided.
4.) Assemble items 6 and 8 to the item 1 using (2) 1/2"X3-1/2"
bolts provided.
5.) Assemble items 7 and 8 to the item 1 using (2) 1/2"X3-1/2"
bolts provided.
6.) Assemble items 5 to both of items 1 using (4) 1/2"X3-1/2"
bolts provided.
Note: When assembling unit DO NOT tighten any fasteners
until specified.
Frame Detail
Item No. Part Number Part Name Qty
1 81046 SIDE FRAME 2
4 81097 TOP FRAME 1
5 81052 BOTTOM CROSS BRACE 1
6 81092 RIGHT WEIGHT STORAGE 1
7 81086 LEFT WEIGHT STORAGE 1
8 99773 BEARING 2
Item No. Part Number Part Name Qty
20 99520 1/2"X3-1/2" BOLT 12
21 99585 1/2" FLATWASHER 14
22 99620 1/2"-13 NUT 12
23 80010 PLATE, SPACER 6
POWER LIFT
REV.
PART NUMBER
R
81045_page2
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

Instructions
7.) Assemble item 9 to item 5 using (2) 1/2"X4-1/2" bolts
provided.
8.) Assemble item 9 to item 3 using (2) 1/2"X4-3/4" bolts
provided.
9.) Assemble item 10 to both item 2 and 9 using (2) 1/2"X4-1/2"
bolts, and (2) 1/2"X1-1/2" bolts provided.
Note: When assembling unit DO NOT tighten any fasteners until
specified.
2
10
3
9
5
STEP 7
Item #24
1/2"X4-1/2"
STEP 8
Item #25
1/2"X4-3/4"
STEP 9
Item #24
1/2"X4-1/2"
24 21 21 22
Hardware Detail
Frame Detail
A
STEP 8
Item #25
1/2"X4-3/4"
STEP 9
Item #26
1/2"X1-1/2"
26
21
21
22
25
21
21
22
A 8/21/19
Item No. Part Number Part Name Qty
2 81052 MIDDLE CROSS BRACE 1
3 81076 FRONT CROSS BRACE 1
5 81052 BOTTOM CROSS BRACE 1
9 81078 SEAT FRAME 1
10 81095 SEAT CROSS BRACE 1
Item No. Part Number Part Name Qty
21 99585 1/2" FLATWASHER 16
22 99620 1/2"-13 NUT 8
24 99539 1/2"X4-1/2" BOLT 4
25 99827 1/2"X4-3/4" BOLT 2
26 99572 1/2"X1-1/2" BOLT 2
POWER LIFT
REV.
PART NUMBER
R
81045_page3
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

8
11
20
21
22
STEP 11 & 12
Item #20
1/2"X3-1/2"
A 8/21/19
Frame Detail
Instructions
10.) Loosen one of the bearings that are on the inside of items 1
so that it comes off.
11.) Insert the shaft on item 11 into the bearings and re-assemble
bearing back onto item 1 using (2) 1/2"X3-1/2" bolts provided.
12.) Tighten all bolts starting from the bottom and working toward
the top. Be sure to tighten set screws on bearings.
13.) Check that items 11 is aligned and moves smoothly.
Hardware Detail
Item No. Part Number Part Name Qty
8 99773 BEARING 2
11 81054 WORK ARM 1
Item No. Part Number Part Name Qty
20 99520 1/2"X3-1/2" BOLT 2
21 99585 1/2" FLATWASHER 2
22 99620 1/2"-13 NUT 2
POWER LIFT
REV.
PART NUMBER
R
81045_page4
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date

13
149
1
15
STEP 16
Item #20
1/2"X3-1/2"
STEP 14
Item #28
3/8"X1-1/2"
STEP 15
Item #28
3/8"X1-1/2"
28
20
23 21 22
A 8/21/19
Instructions
14.) Assemble item 13 to item 9 using (4) 3/8"X1-1/2" flange bolts
provided. (Tighten bolts, but DO NOT over tighten bolts into pad.)
15.) Assemble item 14 to item 9 using (4) 3/8"X1-1/2" flange bolts
provided. (Tighten bolts, but DO NOT over tighten bolts into pad.)
16.) Assemble item 15 to both of items 1 using (4) 1/2"X3-1/2" bolts
provided. (Tighten bolts)
17.) Make sure all bolts are tightened.
Hardware Detail
Frame Detail
Item No. Part Number Part Name Qty
1 81046 SIDE FRAME 2
9 81078 SEAT FRAME 1
13 99772B BACK PAD 1
14 99771B SEAT PAD 1
15 71005 HANDLE 1
Item No. Part Number Part Name Qty
20 99520 1/2"X3-1/2" BOLT 4
21 99585 1/2" FLATWASHER 4
22 99620 1/2"-13 NUT 4
23 80010 PLATE, SPACER 4
28 99441 3/8"X1-1/2" FLANGE BOLT 8
POWER LIFT
REV.
PART NUMBER
R
81045_page5
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF POWER LIFT ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF POWER LIFT IS PROHIBITED
Date