Power-To-Go MP200B User manual

1
Quick Set-Up Guide
Model number: MP200B

2
Table of contents
My phone ............................................3
Getting Started ....................................5
Using the Phone...................................6
Saving Contacts to Phonebook..............7
Changing the ringtone ..........................8
Setting up the SOS function ..................9
Setting up the M1/M2 dial ..................11
Meeting (Vibrate only) mode..............12
Enable Dial/Call number sound...........12
Restore Factory Settings .....................13

3
My phone
1Receiver
2Screen
3Arrow button (up): Shortcut to text message
in standby mode
4Left menu key/main menu
5Green call button/call list: Call in standby
mode/OK button
6Arrow button (down): Call your Speed
Dial contacts in standby mode
7Direct dial button M1
8#1 key/Voicemail (press and hold 2 sec)

4
9 * Button: Press this key in standby mode to
enter the following characters: * /+ /P / W.
10 Arrow button (down): Call your
Speed dial contacts in standby mode
11 OK key
12 Power button (press and hold 8 seconds), end
call, reject call
13 Direct dial button M2
14 Camera button / Speaker switch
15 Flashlight: Press “0” key for 3 seconds to
activate / deactivate the flashlight
16 # Key: In the standby mode, press and hold to
enable / disable the silent mode.
In the edit mode, change the input method
17 Camera
18 Red LED: Low battery (flashing) / charging
mode (solid)
19 LED Torch
20 SOS Emergency button
21 Speaker
22 Microphone
23 Connection for Headset (3.5mm)
24 Charger port

5
Getting Started
➢Inserting a SIM card
➢Inserting and battery
•Insert the battery, making sure that battery contacts
touch the gold contacts, then replace the battery
cover, and press down until it clicks into place.
•Remove the battery cover
(opening in the bottom
left-hand corner)
•Slide the SIM card into the SIM
card holder with gold contacts
facing down.
•Slide your MicroSD card into
the card holder with gold
contacts facing down

6
Using the Phone
➢Using the menu
Press Left menu key (left “…” key) to open
the menu.
•Press Up/Down arrow keys to scroll through
the menu items.
•Press Left menu key to open a menu item.
•To return to standby mode, press Red button
or close the phone.
➢Dual-function keys
Some keys have additional functions if they are
pressed and held down for a few seconds.
•Number 1 key: Listen to mailbox.
•# (Pound) key: Switch between normal mode
and silent (vibrate only) mode.
•Number 0 key: Turn flashlight on

7
Saving Contacts to Phonebook
Contacts/Phonebook can be accessed by
pressing the right menu key (right “…” key)
OR pressing the left menu key (left “…” key)
in standby mode, selecting Contacts -> OK
1. Press Options →New →OK
2. To input contact’s name, use down arrow
key to highlight Name, then press Edit.
Press OK when finished.
3. To input phone number, press the down
arrow button to highlight Mobile or
Home number, press edit, press OK when
finished.
You can assign a specific ringtone to each
contact. Simply highlight Default ringtone,
press Edit then select ringtone from Phone
ringtones or your own sound files.

8
Changing the ringtone
Press the Left Menu key in standby Mode.
Scroll to and select Settings
1. Select Profiles
2. Select Normal (or your current Profile)
3. Select Option →Settings →OK
4. Scroll to and select Ring Settings →
Caller ringtone →Select
5. Choose ringtone from Fixed ringtones
(comes with the phone) or More
ringtones (download from your computer
to phone memory or optional Micro SD
card)
6. Press OK →Done to return to the
previous menu.
7. Repeat steps 3 and 4, select Message
ringtone to change message ringtone.

9
Setting up the SOS function
1. Press the Left Menu key (on keypad)
2. Scroll to and select Settings
3. Select SOS setting →OK (Ensure Status is
checked), scroll to Set SOS numbers →
Select
4. Select No. 1. (if no numbers have been
previously programmed it will be empty)
5. You can use keypad to key in the SOS
contact numbers, or press Contacts to
choose from a saved contact from
Phonebook.
6. Press Save.
7. Repeat steps 5-7 to add up to 6 SOS
contacts. When activated, the phone will
dial the phone numbers in order of entry.
8. Select SOS message.

10
9. The default SMS is “SOS!!” To change this,
press the right menu key to clear the
message and Edit your own message.
Press Save after finished.
Please note: SOS message will only be sent
to mobile phone numbers (in SOS list). SOS
calls need to be accepted by the receiver
within a specific timeframe. If you are
programming a phone number that has an
automatic answering feature please test
before use.

11
Setting up the M1/M2 dial
Please note: A valid SIM card needs to be
installed in order to set up the Speed dial
function.
1. Press Menu button (on keypad)
2. Scroll to and select Settings
3. Scroll to and select Speed dial
4. Select Option →Edit →Input number→
OK
Note:
Once you set the number, you can
“View/Edit/Modify contact or/call/delete”it

12
Meeting (Vibrate only) mode
When in standby mode, the phone can be
changed to meeting (Vibrate only) mode by
pressing and holding the pound (#) key for
three seconds. Repeat the step to switch the
phone back to normal mode.
Enable call/dial number sound
1. Press the Menu button (on keypad)
2. Scroll to and select Settings
3. Scroll to and select Number sound
4. Press OK then press select
“Dial number sound”
“Call in number”

13
Restore factory settings
1. Press the Menu button (on keypad)
2. Scroll to and select Settings
3. Scroll to and select Restore factory
settings
4. Enter password (default 1234)
5. Press OK, then OK to confirm
Please note: By performing this function, all
settings will be restored to factory default.
All information, including contacts, will be
erased. Please ensure to backup all your
contacts to SIM card before performing this
function.