Poweradd T-M6 User manual

(T-M6)User Manual
Thanks for your purchasing Poweradd TWS (Wireless Bluetooth
Earbuds).

English
Specification
Model: T-M6
Chipset: Airoha1536U
Bluetooth version: Bluetooth 5.0
Support agreement: HFP/HSP/A2DP/AVRCP
System compatibility: IOS/Android/Windows
Bluetooth distance: ≥10M
Speaker unit: φ6MM,16Ω moving coil unit
Battery: Earphone 3.7V / 50mah
Charging box: 3.7V / 500mah
Working time: 5H
With charging box using: 24H
Charging time: Earphones 1.5H，Charging box 1.5H
Earphone: 42.7*24*17mm
Charging box: 60*32*55mm
1
Charging contacts Charging contacts
Sensor
indicator light
Microphone
Button
Charging case
battery indicator light
Charger port
(USB Type-C)

Earphone Function
2
Left
Right
Prompt
OFF
Icon Operation Method Function
Power on
Power off
Volume+
Volume-
Play/Pause
Precious
Next
Answer
the call
Reject
the call
Hang up
Voice
assistant
Power
on
Power
off
/
/
"Doo"
/
/
"Doo"
"Doo"
"Doo"
"Doo"
Open the charging box and the
headset will start automatically
After red light goes on,
blue light flashes once
Double-click the left ear button
Double-click the right ear button
Click left or right ear button
Triple-click the left ear button
Triple-click the right ear button
Click left or right ear button
Long press the left or right ear
button for 2 seconds
Click left or right ear button
Long press the left or right ear
button for 2 seconds
Put headset into charging box,
close charging box,
automatically shut down
Red light will go out
in one second
Blue light flashes every
5 seconds
Blue light flashes every
5 seconds
Blue light flashes every
5 seconds
Blue light flashes every
5 seconds
Blue light flashes every
5 seconds
Red and blue lights
flash at the same time
Blue light flashes every
5 seconds
Blue light flashes every
5 seconds
Blue light flashes every
5 seconds
Indicator light

Usage Of Charging Box
Charge the headsets with a charging case
a. Apple and some Android phones can check the headsets
battery, When the headphone battery is low, the headphone will
prompt "low battery" every 2 minutes, and the red light flashes.
b. Pay attention to the left and right distinction between the
charging case and the headset, do not mix it.
c. Close the cover，the headset will automatically shut down and
charge，Charge the headset with the charging box: the headsets
keep red light, charging box red light flashes once every second,
when fully charged, the headset will be
off after 10 seconds for blue, and red
light of charging bin will be off after.
d. The power cord charges the charging
box; red lights flash when charging,
keep the red light on when full charged.
Headphones on/off
Power on: 1.Open the top cover of the charging case, and the
headset will automatically start up and enter the matching mode；
2.After pressing the button for 3 second, the blue light flashes and
the prompt sound is "Power on".
Power off: 1.Put the headset into the charging box, close the
charging box cover, and the headset will automatically shut down;
2.Long press the button, the red light will be off after 1 second,
and the prompt sound is "Power off ".
3
Left Right

Usage Of Charging Box
Charge the headsets with a charging case
a. Apple and some Android phones can check the headsets
battery, When the headphone battery is low, the headphone will
prompt "low battery" every 2 minutes, and the red light flashes.
b. Pay attention to the left and right distinction between the
charging case and the headset, do not mix it.
c. Close the cover，the headset will automatically shut down and
charge，Charge the headset with the charging box: the headsets
keep red light, charging box red light flashes once every second,
when fully charged, the headset will be
off after 10 seconds for blue, and red
light of charging bin will be off after.
d. The power cord charges the charging
box; red lights flash when charging,
keep the red light on when full charged.
Headphones on/off
Power on: 1.Open the top cover of the charging case, and the
headset will automatically start up and enter the matching mode；
2.After pressing the button for 3 second, the blue light flashes and
the prompt sound is "Power on".
Power off: 1.Put the headset into the charging box, close the
charging box cover, and the headset will automatically shut down;
2.Long press the button, the red light will be off after 1 second,
and the prompt sound is "Power off ".
Bluetooth Connection
1. Pairing mode
Long press the“power on”button for about 3 seconds to start up
and pair (or automatically start and pair) Prompt sound "power on"
2. Match a cell phone
3. Automatic reconnect between earbuds
Turn on the right ear, long press the button of the left ear for 3
seconds, and the prompt sound is "power on". Automatic
reconnect, prompt "bluetooth connected.
4. Rematch the earphones
If the headset cannot be automatically reconnected, it needs to be
rematch，Long press the left and right ear buttons for 3 seconds
to turn on, and the headset will automatically pair.
4
Left Right
Paired device
T-M6
Bluetooth
Cellphone name
Open
detection
Available
Open the phone's bluetooth
and search for "T-M6" click
connect, and when you suc
ceed, it says "pairing successful"

Bluetooth Connection
1. Pairing mode
Long press the“power on”button for about 3 seconds to start up
and pair (or automatically start and pair) Prompt sound "power on"
2. Match a cell phone
3. Automatic reconnect between earbuds
Turn on the right ear, long press the button of the left ear for 3
seconds, and the prompt sound is "power on". Automatic
reconnect, prompt "bluetooth connected.
4. Rematch the earphones
If the headset cannot be automatically reconnected, it needs to be
rematch，Long press the left and right ear buttons for 3 seconds
to turn on, and the headset will automatically pair.
Package Contents
Charging box*1
Big earbuds*2
Small earbuds*2
USB charging cable*1
User Manual*1
Pay attention
1. Please avoid using this product in the shower or in the rain, and
please store in a dry and ventilated environment to avoid affecting
product performance.
2. To ensure great connection performance, please keep the
bluetooth distance within 10m.
3. If you can not find “T-M6” in bluetooth on your music device,
please remove all recorded bluetooth pairing data, then turn on
bluetooth again to search for “T-M6”.
4. If signal is disconnected sometimes even if earbuds are fully
charged, please turn the earbuds off, then turn them on to
connect the music device again.
Warranty
All POWERADD products come with full 2-year limited warranty
from the date of purchase(accessories are out of warranty). It will
be out of guarantee if damaged due to incorrect use or force
majeure.
5

Manufacture information:
Company name:Shenzhen Hangshi Technology Co.,Ltd
Address: Hangshi Technology Park,Democracy West Industry Area,
Shajing Town,Bao'an District,Shenzhen,China.