PowerBase 577166 User manual

53cm Self Propelled Petrol
Rotary Lawn Mower
These instructions contain important information that will help you get the best
from your product, ensuring it is assembled correctly and safely. If you need help
or have damaged or missing parts, call the Customer Helpline on 01904 727 509.
IMPORTANT!
Please read these
instructions fully before
starting assembly.
Instruction
Manual
52cm 40V Cordless
Hedge Trimmer 577166

2
Contents
General safety warnings 3
Intended use 15
Warning symbols 15
In the box 18
Operating the hedge trimmer 21
Maintenance and storage 24
Troubleshooting 25
Technical data 25
Disposal 27
Getting help 27
Warranty 27

3
General Safety Warnings
General power tool safety warnings
WARNING! Read all safety warnings
and instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
The term ‘power tool’ in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
• Keep the work area clean and well lit.
Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gases or dust.
Power tools create sparks which may
ignite the dust or fumes.
• Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.

4
Personal safety
• Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
• Use Personal Protective Equipment
(PPE). Always wear eye protection.
Protective equipment, such as a dust mask,
non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions,
will reduce personal injuries.
• Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to a power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger
on the switch or energising power tools that
have the switch on invites accidents.
• Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part of
the power tool may result in personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better
control of the power tool in unexpected
situations.

5
• Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught
in moving parts.
Power tool use and care
• Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it was
designed.
• Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
• Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools. Such preventive
safety measures reduce the risk of starting
the power tool accidentally.
• Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.

6
• Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
• Use the power tool, accessories and
tool bits, etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
Battery use and care
• Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
• Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.

7
• When the battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws, or
other small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
• Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush
immediately with water. If liquid contacts
the eyes, immediately seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
Servicing
Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Hedge trimmer safety warnings
• Keep all parts of the body away from
the cutter blade. Do not remove any
cut material or hold material to be cut
when the blades are moving. Make sure
the switch is off when clearing jammed
material. A moment of inattention while
operating the hedge trimmer may result in

8
serious personal injury.
• Carry the hedge trimmer by the handle
with the cutter blade stopped. When
transporting or storing the hedge
trimmer, always fit the cutting device
cover. Proper handling of the hedge
trimmer will reduce possible personal injury
from the cutter blades.
• Keep the cable away from the cutting
area. During operation, the cable may be
hidden in shrubs and can be accidentally
cut by the blade.
• Hold the hedge trimmer properly, e.g. with
both hands if two handles are provided.
Hold the power tool by the insulated
gripping surfaces only; the cutter blade
may contact hidden wiring. Cutter blades
contacting a ‘live’ wire may make exposed
metal parts of the power tool ‘live’ and
could give the operator an electric shock.
• Check cutting blades regularly for
damage, and if damaged repair
immediately.
• Always ensure all handles and guards are
fitted when using the tool.
• Do not use the trimmer when it is raining
or on wet hedges.
• Never allow children to use the tool.
• Choose a stable and safe position,
especially on steps. When operating the

9
trimmer, take great care and always hold it
firmly with both hands.
• Make yourself familiar with your working
area and be alert for possible hazards,
which you might not hear due to the motor
noise.
• Never attempt to use a damaged or
incomplete tool or one fitted with an
unauthorised modification.
• When the hedge trimmer is not in use, i.e.
for transport or storage, keep it in a dry
place and out of the reach of children.
After use, the tool should be stored so that
the blade is not exposed.
• Only use original spare parts and
accessories supplied with the tool or
recommended by the manufacturer.
• Always wear suitable clothing, e.g. anti-
slip shoes and unrestrictive close-fitting
garments that can not get caught.
• Always wear safety goggles or a face
guard, protective gloves and wear ear
guards (PPE).
• Within the working area, the person
using the power tool is responsible for
any damage or injury sustained by third
parties or their property, which has been
caused by the power tool. Watch your
working area and do not allow third persons
or animals to be nearby.

10
• When operating the power tool, take great
care and always hold it firmly with both
hands. Adopt a stable and safe position,
especially on slopes.
• Never touch the unprotected blades and
never carry the trimmer by the blades.
• Only use original spare parts and
accessories supplied with the trimmer or
recommended by the manufacturer.
General safety warnings for battery
chargers
WARNING! This power tool is not
intended for use by persons (including
children) with reduced physical,
sensory or mental capabilities, or lack
of experience and knowledge, unless
they have been given supervision or
instruction concerning the use of the
power tool by a person responsible for
their safety.
WARNING! Children must be supervised
to ensure that they do not play with the
power tool.
• Before charging the battery, read all the
instructions carefully.

11
• After charging, disconnect the battery
charger from the mains supply. Remove
the chassis connection and then the
battery connection.
• Do not charge a leaking battery.
• Do not use chargers for works other than
those for which they are designed and
intended.
• Before charging, ensure your charger
matches the local AC supply.
• For indoor use. DO NOT expose to rain. The
charging device must be protected from
moisture.
• Do not use the charging device in the open.
• Do not short out the contacts of the battery
or charger.
• Respect the polarity (+/-) when charging.
• Do not open the unit, and keep out of the
reach of children.
• Do not charge the batteries of other
manufacturers or ill-suited models.
• Ensure that the connection between the
battery charger and battery is correctly
positioned, and is not obstructed by foreign
bodies.
• Keep the battery chargers slots free of
foreign objects and protect it from dirt and
humidity. Store in a dry and frost-free place.
• When charging batteries, ensure that

12
the battery charger is in a well-ventilated
area and away from flammable materials.
Batteries can get hot during charging.
Do not overcharge any batteries. Ensure
that batteries and chargers are not left
unsupervised during charging.
• Do not attempt to recharge non-
rechargeable batteries, as they can
overheat and break.
• Longer life and better performance can
be obtained if the battery pack is charged
when the air temperature is between 18°C
and 24°C. Do not charge the battery pack in
air temperatures below 0°C or above 45°C.
This is important as it can prevent serious
damage to the battery pack.
• Only charge a battery pack of the same
model provided by the manufacturer or
different models recommended by them.
Safety warnings for battery packs
• Do not dismantle, open or shred cells or
battery packs.
• Do not short-circuit a battery pack. Do not
store battery packs haphazardly in a box or
drawer where they may short circuit each
other, or be short-circuited by conductive
materials. When the battery pack is not in
use, keep it away from other metal objects,
like paper clips, coins, keys, nails, screws or
other small metal objects that can make a

13
connection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
• Do not expose the battery pack to heat or
fire. Avoid storing in direct sunlight.
• Do not subject the battery pack to
mechanical shock.
• In the event of battery leakage, do not allow
the liquid to come into contact with the skin
or eyes. If contact has been made, wash
the affected area with copious amounts of
water and seek medical advice.
• Seek medical advice immediately if a cell or
battery pack has been swallowed.
• Keep the battery pack clean and dry.
• Wipe the battery pack terminals with a
clean, dry cloth if they become dirty.
• The battery pack needs to be charged
before use. Always refer to this instruction
manual and use the correct charging
procedure.
• Do not keep the battery pack on charge
when it is not in use.
• After extended periods of storage, it may
be necessary to charge and discharge
the battery pack several times to obtain
maximum performance.
• The battery pack gives its best
performance when it is operated at normal
room temperature (20°C ± 5°C).

14
• When discharging several battery
packs, keep battery packs of different
electrochemical systems separate from
each other.
• Recharge only with the charger specified by
the manufacturer. Do not use any charger
other than that specifically provided for
use with the equipment. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
• Do not use any battery pack which is not
designed for use with the equipment.
• Keep the battery pack out of the reach of
children.
• Retain the original product literature for
future reference.
• Remove the battery from the equipment
when it is not in use.
• Dispose of safely in an environmentally-
friendly manner. Not with domestic,
household waste.

15
Intended use
This Li-ion cordless hedge trimmer is intended for trimming
hedges, bushes and shrubs. Observe the technical data for the
maximum cutting capacity. Do not cut non plant material or
branches exceeding the stated maximum capacity. For safety
reasons, it is essential to read this entire instruction manual
before first operation and to observe all the instructions herein.
This product is intended for private domestic use only, not for any
commercial trade use. It must not be used for any purposes other
than those described in this manual.
Warning symbols on the power tool
WARNING!
Conforms to all relevant safety standards.
To reduce the risk of injury, the user must read the
instruction manual.
Wear eye protection (PPE).
Wear ear protection.
Wear a dust mask.
DANGER! Keep hands away from the blades.

16
Do not operate or expose the product to rain or wet
conditions.
Guaranteed sound power level in 94dB.
Keep bystanders away.
Remove the battery pack before any adjustment or
maintenance.
WEEE symbol. Waste electrical products should not be
disposed of with household waste. Please recycle where
facilities exist. Check with your local authority or local store
for recycling guidelines.
Warning symbols on the charger
Before use, carefully read through the user manual.
The charger is for indoor use only.
Class II equipment.
Pole orientation.
Protective 5A limited.
94
T5A

17
Warning symbols on the battery
Do not dispose of batteries in rivers or immerse in water.
Do not subject the battery to strong sunlight over long
periods, and do not leave it on a heater (max. 45°C).
Do not throw on fire.
Contains a Li-ion battery. Do not dispose of waste
batteries in domestic waste. Contact your local authority
to find out how to dispose of batteries.
o
C
45
Li-Ion

18
In the box
Parts
1. Blade sheath
2. Blade
3. Guard
4. Front handle
5. Safety switch
6. Handle rotating button
7. Rear handle
8. Trigger
9. Battery pack
10. Charger
1
2
3
4
5
6
7
8
910

19
WARNING!
Before using the tool, read all instructions carefully.
Blade sheath
Charging the battery
NOTE: The battery pack comes partly charged. Charge the
battery pack prior to first use, ideally at least 60 minutes.
• Always pull out the plug of the charger from the mains before
removing or connecting the battery pack to the charger.
• Never charge the battery pack when the ambient temperature
is below 0°C or above 45°C.
• Never recharge a battery pack again immediately after
rapid charging. This could overcharge the battery pack, thus
reducing the lifespan of the battery pack and charger.
• Rest the charger for at least 15 minutes between continuously
charging sessions.
• If no battery pack is inserted into the charger and the charger
is connected to mains, the charging status LED shows red.
NOTE: Always fully charge the two batteries at same time.
Checking battery capacity
Press the battery capacity level button to check the charging level
of the battery pack. The status/remaining charge will be shown on
the battery charging level indication light.
3 Green LEDs continuously Lit Battery pack fully charged
2 Green LEDs continuously Lit Battery pack 65% charged
1 Green LED continuously Lit Battery pack 35% charged
No LED lit Battery is dead and needs to
be charged
button
LED

20
Charge the battery pack before operating when it is at medium or
low battery charging level.
I. Connect the battery pack to the battery charger.
II. Insert the mains plug into the socket. The green charging
status LED light will flash. Once the battery pack is completely
charged, the green charging status LED is lit continuously,
indicating that the charging process is complete.
III. Disconnect the charger from the mains and remove the
battery pack from the charger.
IV. Attach the battery pack back to the product.
Charging status LEDs
Red LED turns on Charger ready
Green LED flashes Battery pack charging
Green LED continuously lit Battery pack fully charged
Red and green LEDs flashing Battry pack defect
Red and green LEDs
continuously lit
Battery pack too cold or warm
red LED
red LED
green LED
green LED