POWERCOLOR DEVIL BOX Troubleshooting guide

746-G000000412
Product Name
Chassis Size
Max Video Card Size
Max Video Card Power
Connectivity
Internal PSU
System Requirement
Product Warranty
Devil Box
400 x 172 x 242mm
310 x 140 x 50mm
375W
4 x USB 3.0 (Frontx1) + 1x USB3.1 Gen1 Type C
1x Gigabit Ethernet
Laptop Charging via Thunderbolt 3 (PowerDelivery 2.0
max. 60W)
500W
Windows®10 64bit only
1 year warranty
•A/C cord for power supply x1
•Thunderbolt™ 3 cable (40Gbps) x1
•User Installation Guide
•Rubber feet x4
User Installation Guide
USB 3.1 Gen 1 (TYPE C)
USB 3.0 (TYPE A)
USB 3.0 (TYPE A)
USB 3.0 (TYPE A)
Gigabit Ethernet (RJ–45)
THUNDERBOLT 3 (TYPE C)
Getting help
Technical Specifications
Package Contents
Device Layout
USB3.0 (TYPE A Support BC 1.2)
We provide several online and telephone-based support and service options.
Availability varies by country and product, and some services may not be available in
your area. Please to visit www.powercolor.com for more information.
7
1
2
3
4
5
6

Before setting up, please make sure the card is compatible with the Devil Box.
* PCI-Express x16 graphics cards
* VGA Max Dimension: 310x140x50mm
* Max GPU power: 375Wats
* Qualified AMD Radeon™ graphics cards or supported NVIDIA Geforce graphics
cards
4. Locate the graphics card slot, insert the graphics card into the slot.
Make sure it is securely installed. If the card requires additional power connectors,
make sure it connect the PCI-E power cables to PSU.
9. Then system shows below items, please select “Always Connect”, and press
“OK” to finish the setup.
Quick Setup of SATA III 2.5” HDD/SSD
3. Screw the HDD/SSD and lining together and insert the HDD to the slot then plug
the SATA & power cable.
Quick Setup of Graphic Card
3. Unscrew the screws and remove top panel.
1. Please unplug the power cord.
2. Unscrew the screws and remove the side panel.
5. Screw these two screws with graphics card bracket.
6. Close the top and side panel and screw in.
7. Connect the power cord and type C cable to the notebook.
8. Turn on the notebook and system shows below picture, please select “OK”. 1. Please unplug the power cord.
2. Unscrew the screws and remove the side panel.