Powernail 45 User manual

Read this manual before you use this Nailer. Follow all safety warnings and instructions. If you
are uncertain about the operation of the Nailer, call us directly at 1-800-323-1653 for assistance or
contact the closest Powernail Dealer for help. Please retain this information for future reference.
WARNING
REV 4.08
Operation and Maintenance Manual
MODEL 45 TONGUE AND GROOVE NAILER
POWERNAIL
®
CO.
1300 Rose Road, Lake Zurich, IL 60047
Phone: [phone]
Website: www.powernail.com

MODEL 45 EXPLODED VIEW
2

MODEL 45 PARTS LIST
ITEM # PART NO. DESCRIPTION QTY
REQ’D KEY Assembly or Kit
1 08-45-00-010 SPRING CLIP 1 S/K TU / OVH
2 08-45-00-020 FEEDER CHANNEL 1 S/K OVH
5 08-45-00-050 ROLLER PIN ASSEMBLY 1 S/K OVH
5R 08-45-00-05R ROLLER 1 S/K OVH
13 08-45-00-130 FOOT SCREW 4 S/K OVH
13N 08-45-00-13N LOCKNUT 4 S/K OVH
14 08-45-00-140 GATE 1 S
15 08-45-00-150 FOOT 1 S
16 & 19 08-45-00-160 SCREW & WASHER SET FOR SPRING CONT. (2 EA) 1 S/K OVH
17 08-45-00-170 SPRING CONTAINER 1 S/K OVH
18 08-45-00-180 FEEDER SPRING 1 S/K TU / OVH
23 08-45-00-230 DOWEL PIN 2 S
25 08-45-00-250 HANDLE ASSEMBLY 1 S
29 08-45-00-290 ADAPTER PLATE PIN ASSEMBLY 1 S
37 07-45-00-370 PLUNGER 1 S/K OVH
38 08-45-00-380 DRIVING BLADE 1 S/K TU / OVH
39 08-45-00-400 LEFT PLUNGER LINER 1 S
40 08-45-00-390 RIGHT PLUNGER LINER 1 S
41 08-45-00-410 PLUNGER SPRING PIN 1 S/K OVH
45 08-45-00-450 PLUNGER SPRING 1 S/K TU / OVH
58 08-45-00-580 BLADE RETAINER 1 S/K TU / OVH
70 06-99-720 #825 NO-MAR PAD (STICK-ON) .015 THICK 1 S
# 8-25 06-99-010 #825 ADAPTER PLATE ASSEMBLY FOR 3/4” T&G 1 S
ITEM # PART NO. DESCRIPTION QTY.
REQ’D
# 8-26 06-99-040 #826 ADAPTER PLATE ASSEMBLY FOR 1/2” T&G 1
# 8-26 06-99-04A #826 ADAPTER PLATE ASSEMBLY FOR 5/8” T&G 1
# 8-25 06-99-04B #825 ADAPTER PLATE ASSEMBLY FOR 22MM T&G 1
71 06-99-721 #825 NO MAR PAD (STICK-ON) .060 THICK (ACCESSORY) 1
72 08-45-TU-KIT MODEL 45 TUNE-UP KIT 1
73 08-45-OVH-KIT MODEL 45 OVERHAUL KIT 1
74 06-99-430 NAILER SHOE WITH ADAPTER ASSEMBLY 1
MODEL 45 ACCESSORIES
3
KEY: S=Sold Separately, TU=Sold as part of a Tune Up Kit, OV=Sold in an Overhaul Kit

4
POWERCLEAT®NAIL LENGTH CHART
This chart will assist you in determining the proper length of Powercleat®nails
to use for various thicknesses of flooring when sub-flooring member varies as to
species and thickness. Vertical penetration of the Powercleat®nails under the
hardwood floor is shown for each application. This is only a guide. Results should be
tested in the field before proceeding.
REPLACING #38 DRIVING BLADE
1. Remove #5 Roller Pin--save Cotter Pin.
2. Holding Nailer in left hand with Nailer tilted
so rear of Nailer is down, depress #37 Plunger
Head slightly so #5R Roller is released from
Plunger Head.
3. Remove #37 Plunger Head from Body of
Nailer by lifting straight out of Body.
4. Remove #38 Driving Blade from under #58
Rubber Blade Retainer. Discard Blade.
5. Insert new #38 Driving Blade with face of
Blade stamped “Front” facing front of Nailer,
under #58 Rubber Blade Retainer until the “T”
section at top of Blade fits into milled slot under
Plunger Head. Push #58 Rubber Blade Retainer
flush to underside of Plunger Head.
6. Holding Nailer in left hand with Nailer so rear
of Nailer is down, slowly insert Plunger Head and
Driving Blade Assembly into Nailer Body, making
certain the #45 Plunger Spring is inserted into
hole in Plunger Head.
7. While in this position, reinsert the #5 Roller Pin
and Cotter Pin.
8. Installation is complete and Nailer is ready to
use.
3/4"
3/4"
1/2" FLOORING
UNDERLAYMENT
3/4"
19/32"
3/4" FLOORING
UNDERLAYMENT
3/4"
31/32"
3/4" FLOORING
UNDERLAYMENT
3/4"
31/32"
33/32" FLOORING
UNDERLAYMEN
T
3/4"
1-1/8"
1/2" FLOORING
UNDERLAYMENT
3/4"
1"
UNDERLAYMENT
5/8" FLOORING
3/4"
13/16"
3/4" FLOORING
UNDERLAYMENT
3/4"
31/32"
1/2" FLOORING
UNDERLAYMENT
3/4"
7/8"
UNDERLAYMENT
5/8" FLOORING
RR
RR
R
R
R
1-1/2" POWERCLEAT
16 GAGE
1-1/2" POWERCLEAT
16 GAGE
2" POWERCLEAT
16 GAGE
2" POWERCLEAT
16 GAGE
R
2" POWERCLEAT
16 GAGE
2" POWERCLEAT
16 GAGE
1-3/4" POWERCLEAT
16 GAGE
1-3/4" POWERCLEAT
16 GAGE
1-3/4" POWERCLEAT
16 GAGE
R
1-1/2" POWERCLEAT
16 GAGE
R
5/8" FLOORING
UNDERLAYMENT
"
21 32
3/4"