PowerPac LLJ-B08G2 User manual

Instruction Manual for Table Blender
Model:
LLJ-B08G2
Pictures may be different from appliance itself.
Please read this manual carefully before use.
This appliance is for house hold use only.

SAFETY INSTRUCTIONS
In order to prevent accidents or injuries to the user, other people and damage to property, please
follow the instruction below.
Before use, please check the rated voltage that marked on the product rating lable is consistent
with the voltage you use.
Use power suppler with ground protection to prevent and mishap.
Press gently on the power button.
Please make sure the product is assembled properly before using.
Do not insert or put anything in the product or eyes near the product while operating.
Product should be assembled properly while operating to avoid spillage of ingredients.
Please turn off the product when disassemble, assemble or move it.
Do not put too hot ingredients (MAX 60℃) into the cup to avoid deformation and damage of
the cup.
Base and cup should be assembled tightly before install in the housing.
Never place the body part in water or any other liquid. Never rinse it under the tap. Clean the
outside of the body part with a moist cloth.
If the product is automatically shut down while operating, please wait for 20-30 mins for
cooling down.
If any damage is found on the machine, please stop using it immediately to avoid injury.
Caution:
This appliance is not intended for use by people (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision of instruction concerning use of the appliance by a person responsible for their safety.

PARTS & ASSEMBLY
1. Measuring cup
2. Blending cup cover
3. Blending cup
4. Silicon ring
5. Grinding blade assembly
6. Main body
7. On/Off button
8. Dry grinding cup
9. Dry-grinding blade assembly
How to Use
Do clean the parts which have contact of food before usage.
Tap position:
“ -- ”: On/Start
“ 0 ” : Off/Stop

Note: Temperature of food should not exceed 60℃.
Assembly and Usage
The appliance will work only after all parts are assembled well.
Blending:
Step
Picture
Instruction
1
A. Put silicon ring into groove of base of blades assembly. The
appliance cannot work with poor assembly.
B. Screw the blades assembly to the blending cup. Not tightly
screwed or silicon ring missing may lead to leakage.
2
A. Cut ingredient into pieces no bigger than 2cmX2cm, and
put it into the blending cup, than pure in appropriate
amount of water. Total amount must below the MAX mark
on blending cup.
B. Put on the cup cover and turn it to locked position. Put on
the measuring up and turn it to locked position.

3
Put the blending cup into main body and turn it to locked
position.
4
Plug in and press the button to start.
Working time not more than 1 min.
5
Do plug off then take the blending cup off the main body and
take off the cup cover. Then pure food out.
Warning:
1. Hot ingredients like water over 60℃is not allowed to put into blending cup.
2. Food amount should not exceed MAX scale.
3. It is allowed to take off the measuring cup and add more ingredients when then appliance is
working.
4. Better to cut solid food smaller before filling the blending cup.
5. When the appliance is working, finger or any sharp things are not allowed to put into the
blending cup.
6. Do not start the appliance before assembling the cover well.
7. The max working time of the appliance is 1 min. Stop for 2 min after every 1 working min.
Grinding
Step
Picture
Instruction
1
Put ingredient into the grinding cup. Total amount cannot exceed
half of cup capacity (around 80g of soy bean for example).
2
A. Put silicon ring into groove of base of blades assembly. The
appliance cannot work with poor assembly.
B. Screw the blades assembly to the grinding cup tightly.

3
Lock the grinding cup into main body.
4
A. Plug in and press the button to start(working time not more
than 1 min).
B. Do plug off before take off the grinding cup.
C. Gently shake the grinding cup to gather food into middle of the
cup, then screw off the blades assembly and pour out food.
Warning:
1. Water or ingredient with much water like juice or fruit is not allowed to grind.
2. Do clean the grinding cup and blades assembly before use every time. Otherwise cup and
blades assembly may not screw tightly enough.
3. Do not use dry-grinding cup to grind solid food.
4. The max working time of the appliance is 1 min. Stop for 2 min after every 1 working min.
Cleaning and Maintenance
NOTICE ABOUT CLEANING
1. Do unplug the appliance from power supply before cleaning.
2. Do clean the appliance in time after used.
1. Clean the main body with wet cloth. Do not rinse the main body under tap nor put it into
water or any liquid for cleaning.
2. Do not use metal brush or nylon cloth to clean the product surface. Chemical agent like
abstergent may damage the product surface too.
3. It is normal if blending cup changes color after blending fruit or vegetable.
4. Make sure all parts are clear before store the appliance, and store it in clean and dry place.
Follow the steps to disassemble before cleaning:
1
Disassemble the blending cup assembly.

2
Disassemble the dry-grinding cup assembly.
Trouble Shooting
Question
Possible Reason
Suggested Solution
The appliance does not work
even plug on and function
button is pressed.
Not good assembly between
cups or chopper bowl and
main machine.
Take cups or chopper bowl off
the main machine and
re-assembly well.
The appliance is smelly when
begin to use for several times.
It is normal.
Please contact service
centre or distributor if the
appliance is still smelly after
used many times.
Abnormal shutoff during
working.
Low voltage of power supply
Check the power supplier
Too much ingredient
Plug off and take some
ingredient out.
Thermal protect of the motor
Stop for 20-30 min and start
again.
Terrible vibration or sound
noise
The appliance is not put on
flat place. Or Feet are missing.
Put the appliance on flat
place. And assemble all feet.
High voltage of power supply
Check the power supplier
Too much ingredient
Plug off and take some
ingredient out.
Blades are blocked
Blades are blocked by
ingredient
Plug off and take some
ingredient out and cut
ingredient into small piece.
Blending Cup leakage
Silicon ring is missing or
broken.
Assemble the silicon ring well
or change it.
Broker blending cup
Change the blending cup.
Remarks:
Please contact service centre or distributor if shooting trouble above cannot be

removed. Please do not disassemble the product by yourselves.
SPECIFICATIONS
Product
Table Blender
Model
LLJ-B08G2
Rated
Voltage
220-240V~
Rated
Frequency
50Hz
Rated
Power
200W
Rating
working
time
Less than 1min
Interval
Time
More than 2 min
Capacity
0.8L