Powerplus LIGHT POWLI20100 User manual

POWLI20100 EN
Copyright © 2016 VARO P a g e | 1www.varo.com
LED FLOODLIGHT 10W
POWLI20100
1 DOMAIN OF USE
Outdoor or indoor usage such as jobsite, garden, studio and workshop.
WARNING! Read this manual and general safety instructions
carefully before using the appliance, for your own safety. Your
power tool should only be passed on together with these
instructions.
2 WARNING
This Product is Class I and must be Earthed.
Always switch off mains supply before fitting.
Replace any broken or damaged glass as soon as possible.
Ensure all seals are intact and operational after fitting or maintenance.
Do not touch the lamp in use or just after use as there is a risk of being burnt.
Do not cover it with paper or cloth.
Take off from flammable materials.
Do not wash the lamp.
Do not use the lamp where the ambient temperature is over 45°C and less than -
25°C.
Keep with a secure distance, the light could cause damage to your eyes.
3 ASSEMBLY
Find a suitable location to install this product.
Prepare the mains wiring.
Use the mounting bracket to mark the hole centres for fixing.
Drill holes suitable to accept wall plugs. Insert wall plugs.
Ensure mounting bracket.
Terminate wiring. (Fig. 1)
Replace all covers.
Fit the floodlight to the mounting bracket with the screws,
Check seals, gaskets and cable gland operation before testing the luminaire.
Turn on power supply and test luminaire.
4 TECHNICAL DATA
Type
POWLI20100
Power
10W
Voltage/frequency
220–240V ~ 50Hz
Floodlight facade material
tempered glass
Waterproof protection grade
IP65
life-span
>30.000 hours
Lumen
650
Color temperature
6500K

POWLI20100 EN
Copyright © 2016 VARO P a g e | 2www.varo.com
Beam angle
100°
Net weight
0,41 kg
Dimensions
15x2.5x13 cm
5 MAINTENANCE
This product has no user serviceable parts.
Clean with a damp cloth and dry with a lint free cloth or kitchen towel.
6 IMPORTANT INFORMATION
It is recommend that luminaires installed and fitted by a qualified electrican ensuring the
installation complies to the current building regulations.these products are designed for
connection to a 220-240V supply.
Any broken or damaged parts should be replaced as soon as possible.
7 ENVIRONMENT
Should your appliance need replacement after extended use, do not
discard it with the household rubbish but dispose of it in an
environmentally safe way.
Waste produced by electrical machine items should not be handled like
normal household rubbish. Please recycle where recycle facilities exist.
Check with your Local Authority or retailer for recycling advice.