PowerTech SL2254 User manual

1
Smart Wi-Fi LED Bulb
with Colour Change
SL2254
User Manual

Smart LED Bulb User Guide
2
NO.1 Download and install the App
Search and down load “Smart Life” in major
application markets or scan the QR code below to
download the APP
NO.2 Sign in App

Smart LED Bulb User Guide
3
Fig. 1 Fig.2
Registration
If you don not have an app account, you may
choose to register or log in by authentication code.
The registration process in described on this page
and the next.
1. Click“Register” to go to the smart life privacy
policy page. Click“Agree” to proceed to the
registration page.
2. Sign in with mobile phone number + verification
code. Select your country code, enter the phone
number and tap “get” to get a message
containing verification code. Enter the
verification code in the message and tap “Login”
to login the App.
3. Sign in with social media account.

Smart LED Bulb User Guide
4
NO.3 Add device
When install the light, please reset it to enters the

Smart LED Bulb User Guide
5
networking state.
The steps is:
ON-OFF-ON-OFF-ON-OFF-ON(interval time shall
not exceed 2 second but more than 1 second) until
it flashes rapidly. Switch time interval shall exceed
10s.
Then confirm lights blinks rapidly, tap “+” at the
upper right corner of the “Devices” interface and
pick the Lighting to connect the APP.
The specific steps are as follows:

Smart LED Bulb User Guide
6
1. The app supports two configurations: Default
mode and AP mode. Click "AP Mode" at the top
right corner of the "Default mode" page to switch
between modes
2. To select "Default mode", please make sure the
indicator light on the smart device is flashing rapidly
(blinking twice per second) and then click the button
to proceed to the next step
3. If the indicator light is not flashing rapidly, click
"Help" to view the instructions

Smart LED Bulb User Guide
7
1. To select "AP Mode", please make sure the
indicator light on the smart device is flashing
slowly (blinking once every three seconds) and
then click the button to proceed to the next step.
2. If the indicator light is not flashing slowly, click
"Help" to view the instructions.

Smart LED Bulb User Guide
8
Enter Bluetooth password
In a selected mode, clicking confirm button on the
page when the indicator light flashes rapidly/slowly
will bring up the page shown in pic
Select the Wi-Fi in the work area of a device that
can enable successful Internet connection, enter
the Wi-Fi password, and click "OK" to proceed to
configuration.

Smart LED Bulb User Guide
9
If default mode is selected, app configuration will be
completed. Successful configuration will appear.
Names of devices that have been configured
successfully can be changed, and the locations of
the rooms where the corresponding devices are
can be selected.
Note:
1.Connect light bulbs only via WiFi for the first time,
please make sure that the light is quickly flashing,
and WiFi password you inputted is c.orrect
(The connection process may take several minutes,
please be patient.)
2.After the first connection, you can use a new WiFi
or mobile data traffic to control lights anytime at
everywhere.

Smart LED Bulb User Guide
10
NO.4 Control Devices
5.1 Individual Control
Open the control panel for devices. For example,
Fig. 1 shows the light is off, and only the timer can
be accessed in the off mode. Fig. 2 shows the light
is on, and scene, color, brightness, and schedule
can be configured in the on mode. Click".." at the
top right corner of the control panel to manage
individual devices.
5.1 Group Control
1.Click "Create Group" under "More" on a selected