
GEL
AGM
LiFePO4
GEL
AGM
LiFePO4
GEL/AGM/LiFePO4
GEL AGM LiFePO4
MPPT Solar Charge Controller
User Manual
M1210P
Main Feature
Warning and Caution
· Designed for 12V batteries, please don’t connect to higher voltage
· The PV Voc cannot exceed 35V.
batteries.
- 20ºC~+55ºC. Avoid direct sunlight exposure.
environments.
· Keep controller in an environmental temperature from
· Keep controller away from water.
· Please use the device within rated power and voltage range.
· Avoid placing solar panels in partially sunny or shaded
· Please keep the device in a ventilated and heat dissipating
environment.
· User-friendly key press operation, more simple and easier.
· Easy to be mounted.
· LCD shows Battery Voltage and Charge Current, etc .
· Overcharge, Over-temperature, Reverse Polarity Protection.
· Indication of LED inducts Battery Soc, Charging Sta and Battery
· 3-stage charging optimizes battery performance.
· Suitable for battery types such as GEL, AGM and LiFePO .
type.
· 10A MPPT solar charge controller with portable design.
4
LiFePO
GEL AGM LiFePO4
96.4mm
61.6mm
27mm
Reminder: The controllers can be installed indoor only.
Wire Dimension
1) Accessories
L=120mm+10mm
-
2) Controller
L=130mm+10mm
-
Product Dimension