PPC ID-2000 Series User manual

ID-2000 Series

1
Contents
Contents
Caution 2
1. Getting Started
1.1 Introduction 5
1.2 Contents in Package 5
1.3 Product Features 5
1.4 Loading Ribbon 9
1.5 Loading Cleaning Rollers 10
1.6 Card Feeding Hopper 11
1.7 Card Output Stacker 12
1.8 Power Device, Power cable, Communication Cable 12
2. Software Installation
System Requirements 13
2.1 Installing FTD2xx Direct USB Driver 14
2.2 Installing Microsoft Windows Application Software / Driver 17
2.3 Removing FTD2xx Direct USB Driver 20
2.4 Removing Application Software / Driver 21
2.5 Printing with ID-2200 on Microsoft Windows Application Software 22
2.6 Printer Settings in Microsoft Windows 26
2.7 Printer Driver Settings 27
3. Instructions on Maintenance
3.1 Maintenance of Product 31
3.2 How to Replace Ribbon 32
3.3 How to Clean the Printer 33
3.4 How to Replace TPH(Thermal Print Head) and Consumables 34
3.5 Troubleshooting 35
3.6 Technical Specifications 37

2
CAUTION
User should read caution information and keep in mind before using. Different icons remind
important information as to safety. PPC is not responsible for physical harm to body or physical
damage to the product occurred by user's careless use.
Warns user of risk of losing life or being seriously injured.
Warns user of risk of being seriously or slightly injured, or
damage to product.
Warns user of slight damage to body.
Indicates information that supplements detailed information.
Card Printer ID-2000 Series

3
POWER
• Donotusedamagedpowercord,plugorsocket.
• Do not pull plug with power cord.
• Do not touch power plug with wet bare hand.
•Do not bend power cord or put heavy things on the power cord.
• Unplug during thunder and lightning or storage.
Warns user of risk of losing life or being
seriously injured.
INSTALLATION
• Donotputtheprinterinwet,dirtyplace.
• Donotputlightingsontheprinter.Puttheprinterawayfromheatsource.
• Unplugwhilemovingtheprinter.
• Puttheprinterawayfromflammablesource.
CLEANING
• Cleanthewetanddirtyplug.
• Unplugtheprinterbeforecleaning.Donotusewaterorchemicalcleanser.
MISCELLANEOUS
• Donotputwaterbowel,medicine,metalontheprinter.
• Incaseofabnormalsituationintheprinter,unplugtheprinterimmediatelyandcontactyour
dealer.
• Makesurethatyouuseadequatepoweradaptor.

4
INSTALLATION
• Donotputtheprinteronunstablesurface.
• Avoiddirectsunlightthatmaycausedamage.
Warns user of slight damage to body.
CLEANING
• Donotdisassemblecoverorprotectionparts.
vWhen you put hand inside the printer, do not operate it.
• Makesurethatyouperformcleaningandmaintenanceaccordingtotheinstructions.
MISCELLANEOUS
• Donotdisassemble,repair,modify.
• Donotputheavyitemsontheprinter.
Card Printer ID-2000 Series

5
1. Getting Started
1. Getting Started
1.1 Introduction
1.2 Contents in Package
This card printer enables user to create cards easily and quickly in accordance with the
card specifications you wish to get.
You can get high quality color image mode in dye sublimation printing. In order to meet
customers demand, it provides options such as M/S, IC(Contact), RF(Contactless)
encoding as well as bar code, diagram, picture printing.
It is useful for creating membership card, bonus card and identification card on PET, PVC
card.
Please make sure that printer and all the accessories are in good order.
If any items are missing, please contact your dealer.
ID-2000
ID-2100/2200
CLEANING ROLLER POWER ADAPTOR
POWER CABLE USB PRINTER CABLE
USER MANUAL
STACKER
(not applicable for ID-2000)
SOFTWARE CD

6
1.3 Product Features
ID-2000 (Manual Feeding, Single-sided Printing)
1
3
4
5
6
210
11
12
13
14
Front Rear
Side
No
Features Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
LED Display
LCD Display
Card Eject
Ribbon Load
Mobile Connector
Power Button
Card Output Stacker
Printer Lid
Flipper
USB Socket
USB Communication Port
RS232C Communication Port
Power Socket
External RF
LED shows the status of printer
LCD panel displays the status of printer
Button for ejecting card from the printer
Button for replacing or repositioning ribbon
Socket for mobile chip (Option)
Power on and off
Stacker for released output cards
Open for replacing ribbons and cleaning rollers
Used for Dual sided printing (Option)
Used for memory stick or USB connecting
Used for connecting PC and printer with USB cable
Used for connecting PC and printer with RS232C
Used for supplying power
Recognize RF Card
Features Description
8
Card Printer ID-2000 Series

7
1. Getting Started
ID-2100 ( Automatic Feeding, Single-sided Printing )
1
3
4
5
6
2
7
Front
14
Side
8
No
Features Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
LED Display
LCD Display
Card Eject
Ribbon Load
Mobile Connector
Power Button
Card Output Stacker
Printer Lid
Flipper
USB Socket
USB Communication Port
RS232C Communication Port
Power Socket
External RF
LED shows the status of printer
LCD panel displays the status of printer
Button for ejecting card from the printer
Button for replacing or repositioning ribbon
Socket for mobile chip (Option)
Power on and off
Stacker for released output cards
Open for replacing ribbons and cleaning rollers
Used for Dual sided printing (Option)
Used for memory stick or USB connecting
Used for connecting PC and printer with USB cable
Used for connecting PC and printer with RS232C
Used for supplying power
Recognize RF Card
Features Description
Even though we have three different models of ID series, since there is no big difference in
operating them, user manual is designed for ID-2200 Dual Sided as main reference.
10
11
12
13
Rear

8
ID-2200 (Automatic Feeding, Dual-sided Printing)
1
3
4
5
6
2
7
10
Front Rear
14
8
9
Side
No
Features Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
LED Display
LCD Display
Card Eject
Ribbon Load
Mobile Connector
Power Button
Card Output Stacker
Printer Lid
Flipper
USB Socket
USB Communication Port
RS232C Communication Port
Power Socket
External RF
LED shows the status of printer
LCD panel displays the status of printer
Button for ejecting card from the printer
Button for replacing or repositioning ribbon
Socket for mobile chip (Option)
Power on and off
Stacker for released output cards
Open for replacing ribbons and cleaning rollers
Used for Dual sided printing (Option)
Used for memory stick or USB connecting
Used for connecting PC and printer with USB cable
Used for connecting PC and printer with RS232C
Used for supplying power
Recognize RF Card
Features Description
Even though we have three different models of ID series, since there is no big difference in
operating them, user manual is designed for ID-2200 Dual Sided as main reference.
11 12 13
Card Printer ID-2000 Series

9
1. Getting Started
1.4 Loading Ribbon
Please note that improper closing lock of the printer lid may cause
poor printing. (Check out lock of the printer lid)
1
Unpack ribbon carton box.
2
Open printer lid by pressing Cover
Release Button and raise it fully.
3
Make sure that ribbon on is placed in
right position and the printer lid is
closed.

10
1.5 Loading Cleaning Rollers
1
Open printer lid by pressing Cover
Release Button and raise it fully.
2
Slide the cleaning roller into the
loading part and insert roller bar into
U-shaped slots until it locks in place.
U-shaped Slot
Cleaning Roller
Card Printer ID-2000 Series

11
1. Getting Started
1.6 Card Feeding Hopper
1
Open the card feeding lid.
2
Rotate card thickness adjustment
controller in the card feeder to
synchronize it with the cards you
wish to print.
3
Lift the card feeding weight.
4
After stacking card into the card
feeding hopper, put the weight on
the stack of the cards.
Card thickness
adjustment controller
Card feeding weight
Card thickness
adjustment controller
Card feeding weight
Card thickness
adjustment controller

12
1.7 Card Output Stacker
1
Lock the latch of card output stacker
into slots of the front side.
1.8 Power Device, Power cable, Communication Cable
Power adaptor
Power cable
Communication cable
PC
ID-2000 / ID-2100
Card Printer ID-2000

13
2. Software Installation
2. Software Installation
PC Systems requirement
•CheckoutminimalPCoperatingenvironment.
•MSWidows:Windows2000/XP(32bit),WindowsVista
•Computer
–CPU:PentiumIII1GHzabove(PentiumIV1.5GHzrecommended)
– Memory 128 MB above (512 MB recommended)
– HDD 1 GB above (5 GB recommended)
– Internet Explorer 5.5 above (6.0 recommended)
For Windows 2000/XP users, only administrator with authority can
install and remove the program after log-on.

14
2.1 Installing FTD2xx Direct USB Driver
Close all windows in operation. (Recommended)
(Explanation below is based on windows XP. Picture and sequence can differ in
Windows 2000.)
Installing
1
Attach USB cable to computer and place the printer's power switch in the ON position.
The [Found New Hardware] window will open. Select "Install from a list or specific
location", then click "<Next>"
2
Select "Search for the best driver in these locations" and "Include this location in the
search". Click "Browse" to search the CD location as follows.
<New Hardware installation>
<Driver location and file searching>
PPC ID-2000
Card Printer ID-2000 Series

15
2. Software Installation
3
If FTD2xx driver has been found successfully, installation begins.
<Driver installing>
4
In the "Windows Logo Testing" window, select the "Continue Anyway" button.
<Windows logo testing>
PPC ID-2000
PPC ID-2000

16
5
Click the "Finish" button and drive installation will be complete.
<Completing the Found New Hardware>
6
If Windows Restart message opens, restart windows.
PPC ID-2000
Card Printer ID-2000 Series

17
2. Software Installation
2.2 Installing Microsoft Windows Application Software / Driver
Close all windows in operation. (Recommended)
Installing
1
Turn on the computer. In the Found New hardware window, click "Cancel" button.
2
The "Insert installation CD" window will open automatically.
•InsertinstallationCDwithprintedsideupinCD-ROMdrive.
•Ifinstallationwindowdoesnotopenorifyouhaveclosedit,ejectCDandre-insert.
In the " Start " Menu, select " Execute " and start " X(NumberofCD-ROMdrive):¥install.exe " and
click
" OK " button.
3
Automatically open software installation wizard window when you insert software CD.
Click "Start" to start installation process.
<Start window for software installation>
PPC ID-2000
PPC ID-2000

18
4
Select the software you wish to install. Click "<Next>"
<Software selection window>
5
Read License Agreement. Click "Approval" and "<Next>"
<Software license agreement>
Welcome to the PPC ID-2000
Setup Wizard.
PPC ID-2000
PPC ID-2000
Card Printer ID-2000 Series

19
2. Software Installation
6
When installation is complete, Click "<Finish>"
<Completing software installation>
7
Check out the "PPC ID-2000" installed in the printer folder. Check out "PPC ID-2100"
software installed in "START
→ ALL PROGRAM" → "PPC ID-2100".
<Printer driver folder>
PPC ID-2000 S/W and Printer
Driver Install.
PPC ID-2200