Praxas EasyLog EL-CC-2-000 User manual

OK
1. Your new logger comes ready to go.
Simply press and hold the button until the green LED lights up to start logging.
2. Now place your logger in the location you want to monitor.
Once logging, pressing the button will light up an LED to give a quick indication of the
status. It will also add a marker to the data to show that you have checked it.
Green single ash
The data logger is currently logging No action required
Green double ash
The data logger’s memory is full Plug your logger in to a PC and download
your readings
No LEDs ash
The data logger is stopped or the battery is at Check the logger’s status using the PC software
Push to start
OK
QUICK START GUIDE

For a full product data sheet, or for more information on the whole EasyLog range visit:
www.praxas.com/en-gb/Solutions/Datarecorders
3. When you are ready to view the recorded data on your logger, download the
EasyLog CC software.
Visit www.praxas.com/en-gb/Support/Downloads and click on the download link.
4. To save your data, remove the logger from the plastic sleeve and connect it to a
USB port.
Open the EasyLog CC software and click on Save Data.
This will automatically open up your readings in the EasyLogGraph software, where
you can view your data or export it in various formats.
Double click on the downloaded EasyLog CC Installer.exe le, and follow the on screen
prompts.
Issue 1