Premio ACO-6000 Series User manual

USER’S
MANUAL
ACO-6000 Series
Surveillance Applied Fanless System

ACO-6000 | User’s Manual
Table of Contents
2
Prefaces ……………………………………………………………………………………………….. 04
Revision ………………………………………………………..……………………………..……………….……….. 04
Disclaimer ……………………………………………………….…….……………….………………….………….. 04
Copyright Notice …………………………………….…….….………………………………….………………… 04
Trademarks Acknowledgment …………..………….………………………………………................... 04
Environmental Protection Announcement ……………………………………..……..……………….. 04
Safety Precautions ……………………………………………………………………………………….….…….. 05
Technical Support and Assistance ………………………………...……………………..…….…….……. 06
Conventions Used in this Manual …………………………………..……………………......….……….. 06
Package Contents ……………………………………………………………………..…..…………………….… 07
Ordering Information …………………………..……………………………………..………..….….………… 07
Optional Accessory …………...……………………………………................................................. 09
Chapter 1 Product Introductions ……………………………………………………..… 10
1.1 Overview ………………….………………………………..………….…………..……………….. 11
1.1.1 Key Feature ………….…………………..…………….……….…..…..…………....... 11
1.2 Hardware Specification ….………..………….....…………….……..……..……………… 12
1.3 System I/O ………..……………..……………………..……………………..…………………… 14
1.3.1 ACO-6000
(4L, 4P, 4L-M12, 4P-M12, 8L, 8P, 8L-M12, 8P-M12, D10G, 4U3, 8U3) …… 14
1.3.2 ACO-6010-16L(P) ………………………..……………..……………….…………….... 17
1.3.3 ACO-6010-16L(P)-M12 ……………..……………..……………….………………... 19
1.3.4 ACO-6011E(P)
(4L, 4P, 4L-M12, 4P-M12, 8L, 8P, 8L-M12, 8P-M12, D10G, 4U3, 8U3) …… 21
1.4 Mechanical Dimension ……………………..………………………..…..………….………. 24
1.4.1 ACO-6000
(4L, 4P, 4L-M12, 4P-M12, 8L, 8P, 8L-M12, 8P-M12, D10G, 4U3, 8U3) ….… 24
1.4.2 ACO-6010-16L(P) / ACO-6010-16L(P)-M12 …….………………………….… 25
1.4.3 ACO-6011E(P)
(4L, 4P, 4L-M12, 4P-M12, 8L, 8P, 8L-M12, 8P-M12, D10G, 4U3, 8U3) ….... 26
Chapter 2 Switches and Connectors …………….……………………………………. 27
2.1 Switch and connector Locations ………………………………………..…….….…….... 28
2.1.1 Top View ………………………………………………………………………..…..……… 28
2.1.2 Bottom View ……………………………………………………………..……..……….. 29
2.2 Connector / Switch Definition ……………………………….……….…….……............. 30
2.3 Switch Definitions ………….……………............................................................. 31
2.4 Connector Definitions …………………………..................................................... 34
Chapter 3 System Setup …………………………..…………………………….…………… 49
3.1 Removing chassis bottom cover ………………...………………………………………..... 50
3.2 Removing PCIe/PCI expansion module …….……………..….…….…..….…………... 51
3.3 Removing chassis top cover …………….…………………………….….………………...... 52
3.4 Installing SODIMM …………….…………………………..…….…………………………....... 53
3.5 Installing CPU ……………………...…………………………..….……………………………...... 54
3.6 Installing mini PCIe card / mSATA ……………………...…….….……………………...... 59
3.7 Installing antenna ………………...…….………………….……………………..…………...... 60
3.8 Assembly chassis top cover …...…….………………………………………..…………...... 62
3.9 Installing HDD on internal SATA HDD bay …...…….…………………..….………...... 64
3.10 Installing HDD on removable SATA HDD bay ………………..…….……..………...... 66
3.11 Installing PCIe/PCI expansion card ………………..…………………..……..………...... 67

ACO-6000 | User’s Manual
3
3.12 Assemble PCIe/PCI expansion module ……………….……………..……..………...... 68
3.13 Assemble chassis bottom cover ………………..………………..……..……….……...... 69
3.14 Installing SIM card ………………..…………………..…….………..………….…….……...... 70
3.15 Installing wall mount kit …………..……………....………………..……..……….……...... 72
Chapter 4 BIOS Setup …………………………………………………………..……………… 73
4.1 BIOS Introduction …….……….……………………………………….…….…..….…………... 74
4.2 Main Setup ……..……….………………….…………………………..….….………………...... 75
4.3 Advanced Setup …………………………………………..………………………………………… 76
4.3.1 CPU Configuration ..…………...………………………………………..………………. 77
4.3.2 PCH-FW Configuration ……..……………….………..………..……………..……... 78
4.3.3 SATA And RST Configuration ………………..……………….………………..….... 79
4.3.4 RST (UEFI RAID) Configuration ……………………………………….………….... 80
4.3.5 Trusted Computing ……………………………..……………….………………..….... 82
4.3.6 ACPI Settings ……………………………………………………….………………..….... 83
4.3.7 NCT6106D Super IO Configuration ……………………….………………..….... 84
4.3.8 NCT6106D HW Monitor ………………………………......………………..……..... 87
4.3.9 Serial Port Console Redirection ……………..………….………….….…….….... 87
4.3.10 Network Stack Configuration ……………..…………………………..…………....88
4.3.11 CSM Configuration ……………………………..……………..……..…………………. 89
4.3.12 USB Configuration …………………………..………………………….………..…….. 90
4.4 Chipset ………..………………….…..….…..…………………………………………………..….... 91
4.4.1 System Agent (SA) Configuration ………….…………………..………………….. 91
4.4.2 PCH-IO Configuration ………….……………………….………………..…………….. 92
4.5 Security …………...….………………….…..….………………………………………..…………... 97
4.6 Boot …………...……….….………………….…..………………………..…………..……………... 98
4.7 Save & Exit …...……….….………………….…..….…..………………………………………..... 99
Appendix WDT & GPIO …………………………………………………………………………… 100
WDT Sample Code …….……………………….……………….……………..….…….…….…………... 101
GPIO Sample Code ………………………………………………………..…………………………………. 102

ACO-6000 | User’s Manual
4
Revision
Disclaimer
All specifications and information in this User’s Manual are believed to be accurate and up to date. We do
not guarantee that the contents herein are complete, true, accurate or non-misleading. The information in
this document is subject to change without notice.
We disclaim all warranties, express or implied, including, without limitation, those of merchantability,
fitness for a particular purpose with respect to contents of this User’s Manual. Users must take full
responsibility for the application of the product.
Copyright Notice
All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying, recording, or information storage and retrieval systems.
Trademarks Acknowledgment
Intel®, Celeron® and Pentium® are trademarks of Intel Corporation.
Windows® is registered trademark of Microsoft Corporation.
AMI is trademark of American Megatrend Inc.
IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International Business Machines Corporation
All other products and trademarks mentioned in this manual are trademarks of their respective owners.
Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. Please recycle to minimize pollution
and ensure environment protection.
Prefaces
Revision
Description
Date
1.0
Manual Released
2017/09/12
1.1
LAN Chipset Revised
2017/10/16
1.2
Power Connector Definition Revised
2017/11/02
1.3
GPIO Sample Code Revised
2018/02/09
1.4
New
-added CPU support, OS revised, and switches definition
revised
2018/10/09
1.5
WDT & GPIO
Sample Code Revised
2018/11/28
1.6
New
-added TPM 1.2 support
2019/08/12
1.7
New
-added RST (UEFI RAID) configuration & TPM 2.0 support
2020/03/12

ACO-6000 | User’s Manual
5
Safety Precautions
Before installing and using the equipment, please read the following precautions:
Put this equipment on a reliable surface during installation. Dropping it or letting it fall could
cause damage.
The power outlet shall be installed near the equipment and shall be easily accessible.
Turn off the system power and disconnect the power cord from its source before making any
installation. Be sure both the system and the external devices are turned OFF. Sudden surge
of power could ruin sensitive components. Make sure the equipment is properly grounded.
When the power is connected, never open the equipment. The equipment should be opened
only by qualified service personnel.
Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet.
Disconnect this equipment from the power before cleaning. Use a damp cloth. Do not use
liquid or spray detergents for cleaning.
Avoid the dusty, humidity and temperature extremes.
Do not place heavy objects on the equipment.
If the equipment is not used for long time, disconnect it from the power to avoid being
damaged by transient over-voltage.
The storage temperature shall be above -30°C and below 85°C.
The computer is provided with a battery-powered real-time clock circuit. There is a danger of
explosion if incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer.
If one of the following situation arises, get the equipment checked be service personnel:
•The power cord or plug is damaged.
•Liquid has penetrated into the equipment.
•The equipment has been exposed to moisture.
•The equipment does not work well or it cannot work according the user’s manual.
•The equipment has been dropped and damaged.
•The equipment has obvious signs of breakage.
Preface

ACO-6000 | User’s Manual
6
Technical Support and Assistance
Contact your distributor, our technical support team or sales representative for technical support if you
need additional assistance. Please have following information ready before you call:
Model name and serial number
Description of your peripheral attachments
Description of your software (operating system, version, application software, etc.)
A complete description of the problem
The exact wording of any error messages
Conventions Used in this Manual
Preface
This indication alerts operators to an operation that, if not strictly observed,
may result in severe injury.
WARNING
This indication alerts operators to an operation that, if not strictly observed,
may result in safety hazards to personnel or damage to equipment.
CAUTION
This indication provides additional information to complete a task easily.
NOTE

ACO-6000 | User’s Manual
7
Package Contents
Before installation, please ensure all the items listed in the following table are included in the package.
Preface
Item
Description
Q’ty
1
ACO
-6000 Series Fanless Embedded System 1
2
Utility DVD Driver
1
3
Wall Mount Kit
1
4
Accessory Kit
1
5
DVI to VGA Adapter
1
Ordering Information
Model No. Product Description
ACO-6000 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN
ACO-6000-4L Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
6x LAN
ACO-6000-4L-M12 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 4x M12 LAN
ACO-6000-8L Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
10x LAN
ACO-6000-8L-M12 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 8x M12 LAN
ACO-6000-4P Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 4x PoE
ACO-6000-4P-M12 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 4x M12 PoE
ACO-6000-8P Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 8x PoE
ACO-6000-8P-M12 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 8x M12 PoE
ACO-6000-D10G Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 2x 10G LAN
ACO-6000-4U3 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 10x USB
ACO-6000-8U3 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 14x USB
ACO-6010-16L Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
18x LAN
ACO-6010-16L-M12 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 16x M12 LAN
ACO-6010-16P Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 16x PoE
ACO-6010-16P-M12 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 16x M12 PoE

ACO-6000 | User’s Manual
8
Preface
Model No. Product Description
ACO-6011E Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 1x PCIe x16 Expansion
ACO-6011E-4L Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
6x LAN, 1x PCIe x16 Expansion
ACO-6011E-4L-M12 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 4x M12 LAN, 1x PCIe x16 Expansion
ACO-6011E-8L Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
10x LAN, 1x PCIe x16 Expansion
ACO-6011E-8L-M12 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 8x M12 LAN, 1x PCIe x16 Expansion
ACO-6011E-4P Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 4x PoE, 1x PCIe x16 Expansion
ACO-6011E-4P-M12 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 4x M12 PoE, 1x PCIe x16 Expansion
ACO-6011E-8P Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 8x PoE, 1x PCIe x16 Expansion
ACO-6011E-8P-M12 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 8x M12 PoE, 1x PCIe x16 Expansion
ACO-6011E-D10G Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 1x PCIe x16 Expansion, 2x 10G LAN
ACO-6011E-4U3 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 1x PCIe x16 Expansion, 10x USB
ACO-6011E-8U3 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 1x PCIe x16 Expansion,14x USB

ACO-6000 | User’s Manual
9
Preface
Model No. Product Description
ACO-6011P Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 1x PCI Expansion
ACO-6011P-4L Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
6x LAN, 1x PCI Expansion
ACO-6011P-4L-M12 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 4x M12 LAN, 1x PCI Expansion
ACO-6011P-8L Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
10x LAN, 1x PCI Expansion
ACO-6011P-8L-M12 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 8x M12 LAN, 1x PCI Expansion
ACO-6011P-4P Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 4x PoE, 1x PCI Expansion
ACO-6011P-4P-M12 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 4x M12 PoE, 1x PCI Expansion
ACO-6011P-8P Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 8x PoE, 1x PCI Expansion
ACO-6011P-8P-M12 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 8x M12 PoE, 1x PCI Expansion
ACO-6011P-D10G Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 1x PCI Expansion, 2x 10G LAN
ACO-6011P-4U3 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 1x PCI Expansion, 10x USB
ACO-6011P-8U3 Surveillance Applied Fanless System with LGA 1151 for Intel® 6th/7th Gen Processor and Q170 PCH,
2x LAN, 1x PCI Expansion, 14x USB
Optional Accessories
Model No. Product Description
1
-E09A12002
Adapter AC/DC 24V 5A 120W with 3pin Terminal Block Plug 5.0mm
Pitch, GST120A24
-CT1
1
-E09A22102
Adapter AC/DC 24V 9.2A 220W with 3pin Terminal Block Plug
5.0mm Pitch
, GST220A24-CT1
SFICBL022
Power Cord, 3
-pin US Type, 180cm
1
-TPCD00002
Power Cord, European Type, 180cm
1
-TPCD00001
Power Cord, 3
-pin UK Type, 180cm

Chapter 1
Product Introductions