Premio BCO-1000-EHL Series User manual

USER’S
MANUAL
BCO-1000-EHL Series
Basic Fanless Embedded System

BCO-1000-EHL l User’s Manual
Table of Contents
Prefaces …………………………………………………….……………………………………………. 04
Revision …………………………………………………………………………………………..……………….……….. 04
Disclaimer ………………………………………………………..…….…….………………………….……………….. 04
Copyright Notice …………………………………….…………………….…………………………………………… 04
Trademarks Acknowledgment …………..………………………………………………………...................04
Environmental Protection Announcement …………………………….………………….……………….. 04
Safety Precautions ………………………………………….……………………………….…………….………….. 05
Technical Support and Assistance …………………………………….…………….…………….…………….06
Conventions Used in this Manual ………………………………………………………………….….………..06
Package Contents …………………………………………………………………………………………….…………07
Ordering Information …………………………………….……………………………………….……….………… 07
Optional Accessory …………...……………………………………..................................................... 08
Chapter 1 Product Introductions ………………………………………………………..… 09
1.1 Overview ……………………….………………………………..………….…………………………..10
1.1.1 Key Feature ………….……………………………………….……….…..…………….......11
1.2 Hardware Specification ….………………………….....…………….…………..………………12
1.3 System I/O ……………………………..……………………..…………………………………………14
1.3.1 BCO-1000-EHL-10 …….…………......................…………………………………… 14
1.3.2 BCO-1000-EHL-20 …………………………………………………………………….…... 16
1.3.3 BCO-1000-EHL-30 ……….……………………..……………..……….………………... 18
1.4 Mechanical Dimension …………………………..…………………………..………….………. 20
1.4.1 BCO-1000-EHL-10 …….….......................……………………………………….… 20
1.4.2 BCO-1000-EHL-20 …………………………..…………………….…………………...... 21
1.4.3 BCO-1000-EHL-30 ……….……………………..……………….……………………….. 22
Chapter 2 Switches and Connectors ……………………………………………………. 23
2.1 Switch and connector Locations ………………………………………..…….……………....24
2.1.1 Top View ………………………………………………………………………..……………… 24
2.1.2 Bottom View ………………………………………………………………………..………..25
2.1.3 Daughterboard view …………………………………………………………………..…. 26
2.2 Connector / Switch Definition ……………………………….……….…….……….............27
2.3 Switch Definitions ………….……………...............................................................28
Chapter 3 System Setup …………………………..…………………………………………… 40
3.1 torque force to 3.5 kgf cm to execute all the screwing and
unscrewing .…………………………………………………………………………………………….. 41
3.2 Removing chassis bottom cover ……...……………………………………..………..……...41
3.3 Installing SODIMM ……………………………………………….…………………….…………....42
3.4 Installing SATA HDD/SSD ……..……………………..….………………………..………..….... 44
3.5 Installing Mini PCIe card / mSATA ..……………………………………………................ 46
3.6 Installing antenna ……………..…………..………..….………………………………..……...... 47
3.7 Assemble chassis bottom cover ………..….………………………….…………..……...... 49
3.8 Installing SIM card ………..….…………………………………………………………..……...... 50
3.9 Installing DIN rail holder ………..….………………….……………………………..……...... 51
2

BCO-1000-EHL l User’s Manual
3
Chapter 4 BIOS Setup …………………………………………………………………………… 52
4.1 BIOS Introduction …….……….……………………………………..….…….…..….…………...53
4.2 Main Setup ……..……….………………….…………………………..…….….………………......54
4.3 Advanced Setup ………………………………………………………..…………………………….. 55
4.3.1 CPU Configuration ………………………………………………………..………………. 56
4.3.2 PCH-FW Configuration …………………………….………..…………………..……... 57
4.3.3 SATA and RST Configuration ……………………….…………………………..….... 58
4.3.4 Trusted Computing …………………………………..………………....……..……..... 59
4.3.5 ACPI Settings ……………………………..……………….………….….………..….….... 60
4.3.6 Super IO Configuration .………………………………………..…………..………..... 61
4.3.7 Hardware Monitor ……..………………………………..…………………………........ 68
4.3.8 Power IGN Mode ..…………………………………………………………..………….... 70
4.3.9 Serial Port Console Redirection ………………….…………………………………. 71
4.3.10 USB Configuration …………………………………………………………………..……..72
4.3.11 Network Stack Configuration ….……………………………………………..…….. 73
4.4 Chipset …………...……….………………….…..….…..………………………………………..…... 74
4.4.1 System Agent (SA) Configuration ….…………………………..………………….. 75
4.4.2 PCH-IO Configuration ……………………………………………..…………………….. 78
4.5 Security …………...……….………………….…..….…..………………………………..…………...83
4.6 Boot …………...……….….………………….…..…………………………..…………..……………...86
4.7 Save & Exit …...……….….………………….…..….…..……………………………..…………..... 87
Appendix WDT & GPIO …………………………………………………………………………… 88
WDT Sample Code …….……………….………….…….……………………..….…….…….…………... 89
GPIO Sample Code ………………………………..…………………………………………………………. 90

BCO-1000-EHL l User’s Manual
4
Revision
Disclaimer
All specifications and information in this User’s Manual are believed to be accurate and up to date. Premio
Inc. does not guarantee that the contents herein are complete, true, accurate or non-misleading. The
information in this document is subject to change without notice and does not represent a commitment on
the part of Premio Inc.
Premio Inc. disclaims all warranties, express or implied, including, without limitation, those of
merchantability, fitness for a particular purpose with respect to contents of this User’s Manual. Users must
take full responsibility for the application of the product.
Copyright Notice
All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying, recording, or information storage and retrieval systems,
without the prior written permission of Premio Inc. Copyright © Premio Inc.
Trademarks Acknowledgment
Intel®, Celeron® and Pentium® are trademarks of Intel Corporation.
Windows® is registered trademark of Microsoft Corporation.
AMI is trademark of American Megatrend Inc.
IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International Business Machines Corporation
All other products and trademarks mentioned in this manual are trademarks of their respective owners.
Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. Please recycle to minimize pollution
and ensure environment protection.
Prefaces
Revision
Description
Date
1.0
Manual Released
2023/02/17

BCO-1000-EHL l User’s Manual
5
Safety Precautions
Before installing and using the equipment, please read the following precautions:
⚫Put this equipment on a reliable surface during installation. Dropping it or letting it fall could
cause damage.
⚫The power outlet shall be installed near the equipment and shall be easily accessible.
⚫Turn off the system power and disconnect the power cord from its source before making any
installation. Be sure both the system and the external devices are turned OFF. Sudden surge
⚫of power could ruin sensitive components. Make sure the equipment is properly grounded.
⚫When the power is connected, never open the equipment. The equipment should be opened
only by qualified service personnel.
⚫Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet.
⚫Disconnect this equipment from the power before cleaning. Use a damp cloth. Do not use
liquid or spray detergents for cleaning.
⚫Avoid the dusty, humidity and temperature extremes.
⚫Do not place heavy objects on the equipment.
⚫If the equipment is not used for long time, disconnect it from the power to avoid being
damaged by transient over-voltage.
⚫The storage temperature shall be above -30°C and below 70°C.
⚫The computer is provided with a battery-powered real-time clock circuit. There is a danger of
explosion if incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer.
⚫If one of the following situation arises, get the equipment checked be service personnel:
•The power cord or plug is damaged.
•Liquid has penetrated into the equipment.
•The equipment has been exposed to moisture.
•The equipment does not work well or it cannot work according the user’s manual.
•The equipment has been dropped and damaged.
•The equipment has obvious signs of breakage.
Preface

BCO-1000-EHL l User’s Manual
6
Technical Support and Assistance
1. Visit the Premio Inc website at www.premioinc.com where you can find the latest information about
the product.
2. Contact your distributor, our technical support team or sales representative for technical support if
you need additional assistance. Please have following information ready before you call:
⚫Model name and serial number
⚫Description of your peripheral attachments
⚫Description of your software (operating system, version, application software, etc.)
⚫A complete description of the problem
⚫The exact wording of any error messages
Conventions Used in this Manual
Preface
This indication alerts operators to an operation that, if not strictly observed,
may result in severe injury.
WARNING
This indication alerts operators to an operation that, if not strictly observed,
may result in safety hazards to personnel or damage to equipment.
CAUTION
This indication provides additional information to complete a task easily.
NOTE

BCO-1000-EHL l User’s Manual
7
Package Contents
Before installation, please ensure all the items listed in the following table are included in the package.
Item
Description
Q’ty
1
BCO
-1000-EHL Series Embedded System 1
2
Wall Mount KIT
1
3
Accessory Kit
1
Ordering Information
Preface
Model No. Product Description
BCO-1000-EHL-X6425E-10 Basic fanless embedded system with Intel x6425E CPU,
2x DP, 2x COM, 1x 2.5" SATA HDD Bay
BCO-1000-EHL-X6425E-10A Basic fanless embedded system with Intel x6425E CPU,
3x DP, 2x COM, DIO, 1x 2.5" SATA HDD Bay
BCO-1000-EHL-X6425E-10B Basic fanless embedded system with Intel x6425E CPU,
2x DP, 4x COM, 1x 2.5" SATA HDD Bay
BCO-1000-EHL-X6425E-10U Basic fanless embedded system with Intel x6425E CPU,
2x DP, 2x COM, 4x USB, 1x 2.5" SATA HDD Bay
BCO-1000-EHL-X6425E-10H Basic fanless embedded system with Intel x6425E CPU,
2x DP, 1x HDMI, 2x COM, DIO, 1x 2.5" SATA HDD Bay
BCO-1000-EHL-X6425E-10G Basic fanless embedded system with Intel x6425E CPU,
2x DP, 2x COM, 1x 2.5" SATA HDD Bay, Power Ignition
BCO-1000-EHL-J6413-10 Basic fanless embedded system with Intel J6413 CPU,
2x DP, 2x COM, 1x 2.5" SATA HDD Bay
BCO-1000-EHL-J6413-10A Basic fanless embedded system with Intel J6413 CPU,
3x DP, 2x COM, DIO, 1x 2.5" SATA HDD Bay
BCO-1000-EHL-J6413-10B Basic fanless embedded system with Intel J6413 CPU,
2x DP, 4x COM, 1x 2.5" SATA HDD Bay
BCO-1000-EHL-J6413-10U Basic fanless embedded system with Intel J6413 CPU,
2x DP, 2x COM, 4x USB, 1x 2.5" SATA HDD Bay
BCO-1000-EHL-J6413-10H Basic fanless embedded system with Intel J6413 CPU,
2x DP, 1x HDMI, 2x COM, DIO, 1x 2.5" SATA HDD Bay
BCO-1000-EHL-J6413-10G Basic fanless embedded system with Intel J6413 CPU,
2x DP, 2x COM, 1x 2.5" SATA HDD Bay, Power Ignition
•BCO-1000-EHL-10 Series

BCO-1000-EHL l User’s Manual
8
Preface
Model No. Product Description
BCO-1000-EHL-X6425E-20C Basic fanless embedded system with Intel x6425E CPU,
3x DP, 2x COM, DIO, 1x 2.5" SATA HDD Bay
BCO-1000-EHL-X6425E-20D Basic fanless embedded system with Intel x6425E CPU,
2x DP, 4x COM, 1x 2.5" SATA HDD Bay
BCO-1000-EHL-J6413-20C Basic fanless embedded system with Intel J6413 CPU,
3x DP, 2x COM, DIO, 1x 2.5" SATA HDD Bay
BCO-1000-EHL-J6413-20D Basic fanless embedded system with Intel J6413 CPU,
2x DP, 4x COM, 1x 2.5" SATA HDD Bay
•BCO-1000-EHL-20 Series
Model No. Product Description
BCO-1000-EHL-X6425E-30C Basic fanless embedded system with Intel x6425E CPU,
3x DP, 2x COM, DIO, 1x 2.5" SATA HDD Bay
BCO-1000-EHL-J6413-30C Basic fanless embedded system with Intel J6413 CPU,
3x DP, 2x COM, DIO, 1x 2.5" SATA HDD Bay
•BCO-1000-EHL-30 Series
Optional Accessories
Model No. Product Description
1
-E09A06007
Adapter AC/DC 12V 5A 60W with 3pin Terminal Block Plug 5.0mm Pitch
SFICBL022
Power Cord, 3
-pin US Type, 180cm
1
-TPCD00002
Power Cord, European Type, 180cm
1
-TPCD00001
Power Cord, 3
-pin UK Type, 180cm
3
-DINR-0004
DIN
-Rail Mount Kit

Chapter 1
Product Introductions

BCO-1000-EHL l User’s Manual
10
1.1 Overview
Based on Intel® Atom™x6425E (2.0GHz) Quad Core processor or Celeron® J6413 (1.8GHz) Quad Core
processor, BCO-1000-EHL series is a high variety and diversity fanless embedded system. It offers
modularize expansion I/O, rich connectivity interfaces, wide range (9~36V) DC power input, and high
reliability even operating in temperature extremes (-20 ° C to 50 ° C).
Featuring with completely cable-less designed, high functional, one-piece housing design, and anti-
vibration, BCO-1000-EHL series are ruggedized systems that can operate in harsh environments and
easy to install and maintain. A build in over voltage protection (OVP), over current protection (OCP),
reserve voltage protection, and wide range DC power input makes BCO-1000-EHL series are safety
system for all industrial applications.
Chapter 1: Product Introductions
Model No. Rear Panel Front Panel
BCO-1000-EHL-10
BCO-1000-EHL-10A
Expanslon Modules:
1x DP Port and 1x DIO (4in/4out, Isolated)
BCO-1000-EHL-10B
Expanslon Modules:
2x COM Ports
BCO-1000-EHL-10U
Expanslon Modules:
4x USB Ports
BCO-1000-EHL-10H
Expanslon Modules:
1x HDMI Port
BCO-1000-EHL-10G
(Power Ignition)
•BCO-1000-EHL-10
•BCO-1000-EHL-10A
•BCO-1000-EHL-10B
•BCO-1000-EHL-10U
•BCO-1000-EHL-10H
•BCO-1000-EHL-10G
•BCO-1000-EHL-20
•BCO-1000-EHL-20C
•BCO-1000-EHL-20D
•BCO-1000-EHL-30C

BCO-1000-EHL l User’s Manual
11
1.1.1 Key Features
⚫Support Intel Atom™/Celeron® Processor
⚫1x 260-pin DDR4 SODIMM. Max. up to 32GB
⚫Dual Independent Display by 2x Display Port
⚫2x Intel® GbE supporting Wake-on-LAN and PXE
⚫1x 2.5” SATA HDD Bay, 1x mSATA,
⚫1x M.2 (B Key, 2242/3042/3052, Support 4G/5G)
⚫1x Full-size mini PCIe for communication or expansion modules
⚫2x RS-232/422/485, 3x USB 3.2 Gen2, 1x USB 2.0
⚫9 to 36VDC Wide Range Power Input Supporting AT/ATX Mode
⚫Wide Operating Temperature -20°C to 50°C
⚫TPM 2.0 Supported
⚫Up to 4x Universal Expansion Slots
Chapter 1: Product Introductions
Model No. Rear Panel Front Panel
BCO-1000-EHL-20
BCO-1000-EHL-20C
Expanslon Modules:
2x COM Ports,
1x DP Port and 1x DIO (4in/4out, Isolated)
BCO-1000-EHL-20D
Expanslon Modules:
4x COM Ports
Model No. Rear Panel Front Panel
BCO-1000-EHL-30C
Expanslon Modules:
4x COM Ports,
1x DP Port and 1x DIO (4in/4out, Isolated)

BCO-1000-EHL l User’s Manual
12
Chapter 1: Product Introductions
1.2 Hardware Specification
System
Processor
Support Intel® EHL Processor (Up to 12W TDP)
•Intel® Atom® Processor x6425E, Quad Core, 1.5 MB
Cache, 2.0 GHz, ECC supported
•Intel® Celeron® Processor J6413, Quad Core, 1.5 MB
Cache, 1.8 GHz
System
Chipset SoC integrated
LAN Chipset
•1 GbE1: Intel I210
(Support Wake-on-LAN and PXE)
•2.5 GbE2: Intel I225
(Support Wake-on-LAN and PXE)
Audio Codec Realtek ALC888S
System
Memory
1x 260-Pin DDR4
2400/2667/3200MT/s SODIMM.
Max. up to 32GB
Graphics Intel® UHD Graphics
BIOS AMI 256Mbit SPI BIOS
Watchdog Software Programmable
Supports 1~255 sec. System Reset
TPM TPM 2.0
Display
DisplayPort 2x DisplayPort 1.4, DP++
(4096 x 2160@60Hz)
Multiple Display Dual Display
Storage
SSD/HDD 1x Internal 2.5" SATA HDD Bay
(support H=9.5 mm)
mSATA 1x mSATA
(shared by 1x Mini PCI Express)
M.2 1x M.2 (B Key, 2242/3042/3052, PCIex
1
+ USB 3.2 Gen2, Support 4G/5G Module)
SIM Socket 1x External SIM socket
I/O
COM 2x RS-232/422/485
USB 3x USB 3.2 Gen 2 (10 Gbps), 1x USB 2.0
LAN 2x RJ45 (2.5 & 1 GbE)
Audio 1x Mic-in, 1x Line-out
CAN 2x CAN 2.0 A/B 2-pin Internal header
Universal I/O Bracket
BCO-1000-EHL-10：1x Universal I/O Bracket (By mini PCIe interface, Premio Priority Module)
BCO-1000-EHL-20：2x Universal I/O Bracket (By mini PCIe interface, Premio Priority Module)
BCO-1000-EHL-30：4x Universal I/O Bracket (By mini PCIe interface, Premio Priority Module)
Others
5x WiFi Antenna Holes
1x Power Switch, 1x AT/ATX Switch, 1x Remote Power On/Off
1x Internal CMOS Battery Cable
1x 4-PIN FAN Connector
Expansion
Mini PCI Express 1x Full-size Mini PCIe
Expansion Modules
Optional:
• 2-port COM module with Super I/O Chipset
• 4-Port USB module with USB hub
• 1-Port DP 1.4 and DIO (4 in / 4 out, Isolated)
• 1-Port HDMI 2.0
Operating System
Windows Windows 10
Linux Linux kernel

BCO-1000-EHL l User’s Manual
13
Chapter 1: Product Introductions
Environment
Operating Temp. -20°C to 50°C
Storage Temp. -30°C to 70°C
Relative
Humidity 10% to 95% (non-condensing)
Vibration
•With SSD:
5 Grms, 5 - 500 Hz, 0.5 hr/axis
•With HDD:
1 Grms, 5 - 500 Hz, 0.5 hr/axis
Shock With SSD: 50G, half sine, 11ms
Standards /
Certification CE, FCC Class A
Physical
Construction Extruded Aluminum with Heavy Duty
Metal
Dimension
•BCO-1000-EHL-10：
142 (W) x 101.2 (D) x 41.5 (H) mm
•BCO-1000-EHL-20：
142 (W) x 101.2 (D) x 58 (H) mm
•BCO-1000-EHL-30：
142 (W) x 101.2 (D) x 75 (H) mm
Weight
•BCO-1000-EHL-10：0.6 kg
BCO-1000-EHL-20：0.7 kg
•BCO-1000-EHL-30：0.74 kg
Mounting •Wall Mounting
•DIN-Rail Mounting (Optional)
Power
Power Mode AT, ATX
Power Supply Voltage 9~36VDC
Power Ignition Sensing 6-mode and Adjustable Power Ignition Management, Optional
Power Connector 3-pin Terminal Block
Power Adaptor Optional AC/DC 12V/5A, 60W
Power Protection
OVP (Over Voltage Protection)
OCP (Over Current Protection)
Reverse Protection

BCO-1000-EHL l User’s Manual
14
1.3 System I/O
1.3.1 BCO-1000-EHL-10
Front Panel
•ATX power on/off switch
Press to power-on or power-off the system
•AT/ATX mode select switch
Used to select AT or ATX power mode
•Power LED
Indicates the power status of the system
•HDD LED
Indicates the status of the hard drive
•Wachdog LED
Indicates the watchdog status of the system
•USB 3.2 Gen 2
Used to connect USB 3.2 device
•USB 2.0 port
Used to connect USB 2.0 device
•SIM card
Used to insert a SIM card
•LAN port
Used to connect the system to a local area
network
•Line-out
Used to connect a speaker
•Mic-in
Used to connect a microphone
•Remote power on/off
Used to plug a power on/off with terminal
block
•Reset Hole
Used to reset the system
•Antenna hole
Used to connect an antenna for optional
Mini-PCIe WiFi module
Chapter 1: Product Introductions

BCO-1000-EHL l User’s Manual
15
1.3.1 BCO-1000-EHL-10
Rear Panel
•DC IN
Used to plug a DC power input with terminal
block
•DisplayPort
Used to connect a DisplayPort monitor
•COM port
COM1 ~ COM2 support RS232/422/485 serial
device
•Antenna hole
Used to connect an antenna for optional
Mini-PCIe WiFi module
•Expandable I/O bracket
Used to customized I/O output
Chapter 1: Product Introductions
Available Expansion Module Options for Rear Panel

BCO-1000-EHL l User’s Manual
16
1.3.2 BCO-1000-EHL-20
Front Panel
•ATX power on/off switch
Press to power-on or power-off the system
•AT/ATX mode select switch
Used to select AT or ATX power mode
•Power LED
Indicates the power status of the system
•HDD LED
Indicates the status of the hard drive
•Wachdog LED
Indicates the watchdog status of the system
•USB 3.2 Gen 2
Used to connect USB 3.2 device
•USB 2.0 port
Used to connect USB 2.0 device
•SIM card
Used to insert a SIM card
•LAN port
Used to connect the system to a local area
network
•Line-out
Used to connect a speaker
•Mic-in
Used to connect a microphone
•Remote power on/off
Used to plug a power on/off with terminal
block
•Reset Hole
Used to reset the system
•Antenna hole
Used to connect an antenna for optional
Mini-PCIe WiFi module
Chapter 1: Product Introductions

BCO-1000-EHL l User’s Manual
17
1.3.2 BCO-1000-EHL-20
Rear Panel
•DC IN
Used to plug a DC power input with terminal
block
•DisplayPort
Used to connect a DisplayPort monitor
•COM port
COM1 ~ COM2 support RS232/422/485 serial
device
•Antenna hole
Used to connect an antenna for optional
Mini-PCIe WiFi module
•Expandable I/O bracket
Used to customized I/O output
Chapter 1: Product Introductions
Available Expansion Module Options for Rear Panel

BCO-1000-EHL l User’s Manual
18
1.3.3 BCO-1000-EHL-30
Front Panel
•ATX power on/off switch
Press to power-on or power-off the system
•AT/ATX mode select switch
Used to select AT or ATX power mode
•Power LED
Indicates the power status of the system
•HDD LED
Indicates the status of the hard drive
•Wachdog LED
Indicates the watchdog status of the system
•USB 3.2 Gen 2
Used to connect USB 3.2 device
•USB 2.0 port
Used to connect USB 2.0 device
•SIM card
Used to insert a SIM card
•LAN port
Used to connect the system to a local area
network
•Line-out
Used to connect a speaker
•Mic-in
Used to connect a microphone
•Remote power on/off
Used to plug a power on/off with terminal
block
•Reset Hole
Used to reset the system
•Antenna hole
Used to connect an antenna for optional
Mini-PCIe WiFi module
Chapter 1: Product Introductions

BCO-1000-EHL l User’s Manual
19
1.3.3 BCO-1000-EHL-30
Rear Panel
•DC IN
Used to plug a DC power input with terminal
block
•DisplayPort
Used to connect a DisplayPort monitor
•COM port
COM1 ~ COM2 support RS232/422/485 serial
device
•Antenna hole
Used to connect an antenna for optional
Mini-PCIe WiFi module
•Expandable I/O bracket
Used to customized I/O output
Chapter 1: Product Introductions
Available Expansion Module Options for Rear Panel

BCO-1000-EHL l User’s Manual
20
1.4 Mechanical Dimensions
1.4.1 BCO-1000-EHL-10 Unit: mm
Chapter 1: Product Introductions