Premio RCO-6OOO-8L User manual

USER’S
MANUAL
RCO-6000 Series
Superior Fanless Embedded System

RCO-6000 | User’s Manual
Table of Contents
Prefaces ……………………………………………………………………………………………….. 04
Revision ………………………………………………………..……………………………..……………….……….. 04
Disclaimer ……………………………………………………….…….……………….………………….………….. 04
Copyright Notice …………………………………….…….….………………………………….………………… 04
Trademarks Acknowledgment …………..………….………………………………………................... 04
Environmental Protection Announcement ……………………………………..……..……………….. 04
Safety Precautions ……………………………………………………………………………………….….…….. 05
Technical Support and Assistance ………………………………...……………………..…….…….……. 06
Conventions Used in this Manual …………………………………..……………………......….……….. 06
Package Contents ……………………………………………………………………..…..…………………….… 07
Ordering Information …………………………..……………………………………..………..….….………… 07
Optional Accessory …………...……………………………………................................................. 09
Chapter 1 Product Introductions ……………………………………………………..… 10
1.1 Overview ………………….………………………………..………….…………..……………….. 11
1.1.1 Key Feature ………….…………………..…………….……….…..…..…………....... 11
1.2 Hardware Specification ….………..………….....…………….……..……..……………… 12
1.3 System I/O ………..……………..……………………..……………………..…………………… 13
1.3.1 RCO-6000 ………………………......................……………………………………… 13
1.3.2 RCO-6000-4L(P) ………………………..……………..……………….………………... 15
1.3.3 RCO-6000-4L(P)-M12 ……………………………..…….……………………..……... 17
1.3.4 RCO-6000-8L(P) ………………………………………………………..………………... 19
1.3.5 RCO-6000-8L(P)-M12 ………………….……………….…..…..….………………... 21
1.3.6 RCO-6011E(P) ………………….……................………………..…………………… 23
1.3.7 RCO-6011E(P)-4L(P) …………………………..……..…………..….………………... 25
1.3.8 RCO-6011E(P)-4L(P)-M12 …………………………..…….…..…….……………... 27
1.3.9 RCO-6011E(P)-8L(P) …………………………..……….…………………….………... 29
1.3.10 RCO-6011E(P)-8L(P)-M12 ……………………………….…………….……….….. 31
1.3.11 RCO-6022EE(PP/PE) ……………................……………………………………… 33
1.3.12 RCO-6022EE(PP/PE)-4L(P) ……………….…………………..……………….…... 35
1.3.13 RCO-6022EE(PP/PE)-4L(P)-M12 ……………………………..…….…………... 37
1.3.14 RCO-6022EE(PP/PE)-8L(P) ………………………………………….……………... 39
1.3.15 RCO-6022EE(PP/PE)-8L(P)-M12 …………………………..…….………….….. 41
1.4 Mechanical Dimension ……………………..………………………..…..………….………. 43
1.4.1 RCO-6000 / RCO-6000-4L(P) / RCO-6000-4L(P)-M12 /
RCO-6000-8L(P) / RCO-6000-8L(P)-M12 …………………………………….… 43
1.4.2 RCO-6011E / RCO-6011E-4L(P) / RCO-6011E-4L(P)-M12 /
RCO-6011E-8L(P) / RCO-6011E-8L(P)-M12 / RCO-6011P /
RCO-6011P-4L(P) / RCO-6011P-4L(P)-M12 / RCO-6011P-8L(P) /
RCO-6011P-8L(P)-M12 …..…………………………………………………..….….... 44
1.4.3 RCO-6022EE / RCO-6022EE-4L(P) / RCO-6022EE-4L(P)-M12 /
RCO-6022EE-8L(P) / RCO-6022EE-8L(P)-M12 / RCO-6022PP /
RCO-6022PP-4L(P) / RCO-6022PP-4L(P)-M12 / RCO-6022PP-8L(P) /
RCO-6022PP-8L(P)-M12 / RCO-6022PE / RCO-6022PE-4L(P) /
RCO-6022PE-4L(P)-M12 / RCO-6022PE-8L(P) /
RCO-6022PE-8L(P)-M12 ……………………..……….……….….………………….. 45
2

RCO-6000 | User’s Manual
3
Chapter 2 Switches and Connectors …………….……………………………………. 46
2.1 Switch and connector Locations ………………………………………..…….….…….... 47
2.1.1 Top View ………………………………………………………………………..…..……… 47
2.1.2 Bottom View ……………………………………………………………..……..……….. 48
2.2 Connector / Switch Definition ……………………………….……….…….……............. 49
2.3 Switch Definitions ………….……………............................................................. 50
2.4 Connector Definitions …………………………..................................................... 50
Chapter 3 System Setup …………………………..…………………………….…………… 66
3.1 Set torque force to 3.5 kgf-cm to execute all the screwing and
unscrewing …………………………………………………………………………………………….. 67
3.2 Removing chassis bottom cover ………………...………………………………………..... 67
3.3 Removing PCIe/PCI expansion module …….……………..….…….…..….…………... 68
3.4 Removing chassis top cover …………….…………………………….….………………...... 69
3.5 Installing SODIMM …………….…………………………..…….…………………………....... 70
3.6 Installing CPU ……………………...…………………………..….……………………………...... 71
3.7 Installing mini PCIe card / mSATA ……………………...…….….……………………...... 76
3.8 Installing antenna ………………...…….………………….……………………..…………...... 77
3.9 Assembly chassis top cover …...…….………………………………………..…………...... 79
3.10 Installing HDD on internal SATA HDD bay …...…….…………………..….………...... 81
3.11 Installing HDD on removable SATA HDD bay ………………..…….……..………...... 83
3.12 Installing PCIe/PCI expansion card ………………..…………………..……..………...... 84
3.13 Assemble PCIe/PCI expansion module ……………….……………..……..………...... 86
3.14 Assemble chassis bottom cover ………………..………………..……..……….……...... 87
3.15 Installing SIM card ………………..…………………..…….………..………….…….……...... 88
3.16 Installing wall mount kit …………..……………....………………..……..……….……...... 90
Chapter 4 BIOS Setup …………………………………………..……………..……………… 91
4.1 BIOS Introduction …….……….……………………………………….…….…..….…………... 92
4.2 Main Setup ……..……….………………….…………………………..….….………………...... 93
4.3 Advanced Setup …………………………………………..………………………………………… 94
4.3.1 CPU Configuration ..…………...………………………………………..………………. 95
4.3.2 PCH-FW Configuration ……..……………….………..………..……………..……... 96
4.3.3 SATA And RST Configuration ………………..……………….………………..….... 97
4.3.4 RST (UEFI RAID) Configuration ……………………………………….………….... 98
4.3.5 Trusted Computing ……………………………..……………….………………..….... 100
4.3.6 ACPI Settings ……………………………………………………….………………..….... 101
4.3.7 NCT6106D Super IO Configuration ……………………….………………..….... 102
4.3.8 NCT6106D HW Monitor ………………………………......………………..……..... 105
4.3.9 Serial Port Console Redirection ……………..………….………….….…….….... 106
4.3.10 Network Stack Configuration ……………..…………………………..…………....106
4.3.11 CSM Configuration ……………………………..……………..……..…………………. 107
4.3.12 USB Configuration …………………………..………………………….………..…….. 108
4.4 Chipset ………..………………….…..….…..…………………………………………………..….... 109
4.4.1 System Agent (SA) Configuration ………….…………………..………………….. 109
4.4.2 PCH-IO Configuration ………….……………………….………………..…………….. 112
4.5 Security …………...….………………….…..….………………………………………..…………... 115
4.6 Boot …………...……….….………………….…..………………………..…………..……………... 116
4.7 Save & Exit …...……….….………………….…..….…..………………………………………..... 117
Appendix WDT & GPIO …………………………………………………………………………… 118
WDT Sample Code …….……………………….……………….……………..….…….…….…………... 119
GPIO Sample Code ………………………………………………………..…………………………………. 120

RCO-6000 | User’s Manual
4
Revision
Disclaimer
All specifications and information in this User’s Manual are believed to be accurate and up to date. We do
not guarantee that the contents herein are complete, true, accurate or non-misleading. The information in
this document is subject to change without notice.
We disclaim all warranties, express or implied, including, without limitation, those of merchantability,
fitness for a particular purpose with respect to contents of this User’s Manual. Users must take full
responsibility for the application of the product.
Copyright Notice
All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying, recording, or information storage and retrieval systems.
Trademarks Acknowledgment
Intel®, Celeron® and Pentium® are trademarks of Intel Corporation.
Windows® is registered trademark of Microsoft Corporation.
AMI is trademark of American Megatrend Inc.
IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International Business Machines Corporation
All other products and trademarks mentioned in this manual are trademarks of their respective owners.
Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. Please recycle to minimize pollution
and ensure environment protection.
Prefaces
Revision
Description
Date
1.0
Manual Released
2016/08/23
1.1
Switches and Connectors Revised
2017/09/12
1.2
Power Connector Definition Revised
2017/11/02
1.3
Upper
Cover 2D Drawing Revised
2017/11/29
1.4
GPIO
Sample Code Revised
2018/02/09
1.5
New
-added CPU support and OS revision
2018/08/20
1.6
WDT & GPIO
Sample Code Revised
2018/11/27
1.7
New
-added TPM support
2019/02/11
1.8
New
-added RST (UEFI RAID) configuration
2019/12/04

RCO-6000 | User’s Manual
5
Safety Precautions
Before installing and using the equipment, please read the following precautions:
Put this equipment on a reliable surface during installation. Dropping it or letting it fall could
cause damage.
The power outlet shall be installed near the equipment and shall be easily accessible.
Turn off the system power and disconnect the power cord from its source before making any
installation. Be sure both the system and the external devices are turned OFF. Sudden surge
of power could ruin sensitive components. Make sure the equipment is properly grounded.
When the power is connected, never open the equipment. The equipment should be opened
only by qualified service personnel.
Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet.
Disconnect this equipment from the power before cleaning. Use a damp cloth. Do not use
liquid or spray detergents for cleaning.
Avoid the dusty, humidity and temperature extremes.
Do not place heavy objects on the equipment.
If the equipment is not used for long time, disconnect it from the power to avoid being
damaged by transient over-voltage.
The storage temperature shall be above -30°C and below 85°C.
The computer is provided with a battery-powered real-time clock circuit. There is a danger of
explosion if incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer.
If one of the following situation arises, get the equipment checked be service personnel:
•The power cord or plug is damaged.
•Liquid has penetrated into the equipment.
•The equipment has been exposed to moisture.
•The equipment does not work well or it cannot work according the user’s manual.
•The equipment has been dropped and damaged.
•The equipment has obvious signs of breakage.
Preface