Prestigio GV5800 BTHDDVR User manual

EN-1
EN
CAUTION
1. To reduce the risk of electric shock, do not remove the cover (or back). No
user-serviceable parts inside. Refer servicing to qualified service personnel.
2. The manufacturer should not hold responsibility for the damage caused by any
substitutions and modifications of the product without authorization from the
manufacturer or authorized unit.
WARNING
The device should not be exposed to dripping or splashing and no objects filled with liquids
should be placed on the device.
Prestigio GeoVision 5800BTHDDVR–Accessories List
ITEM NAME QTY
Car Charger 1
USB Cable 1
Car Mount 1
Stylus Pen 1
User Manual 1
Warranty Card 1
Driver/Document CD 1
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
I
mpor
t
an
t
S
a
f
e
t
y
Instructions Accessories

EN -2
EN
Prestigio GeoVision 5800BTHDDVR
Front and Side View
1. LCD Touch Screen
Tap the screen with touch pen or finger to select menu commands or to enter
information.
2. Battery Status Indicator
The indicator glows in bright green color when battery is fully charged and in red color
when charging.
3. Earphone Jack
Connects to earphones or headsets.
4. microSD Slot
Receiving micro SD memory card for data access or memory expansion.
5. Video-IN Jack
6. mini USB Port
Connection to USB Cable for data access or battery charging
7. Microphone
Records sound
Prestigio GeoVision 5800BTHDDVR
Rear and Top View
1. Speaker
Emits sound, voice or music.
2. Reset Button
Press to reboot the device.
3. T-flash slot for DVR
Receiving micro SD card for recording video
4. Power Button
Press to power the device ON/OFF.
5. Lock Button
Press to lock the current video
View of Main Unit
View of Main Unit
1
4
3
6
2
5
7
1
4
2
35

EN-3
EN
Inserting microSD Card
To insert a microSD card, place the
connector towards the device and the
card label towards the front side of
the device.
To remove a microSD card, gently
press the edge of the card to release
the safety lock and pull the card out
of the slot.
NOTE:
Please always make sure that no application is accessing the microSD
card before extraction.
Connecting to External USB Device (Charging)
Insert the USB connector into the
appropriate USB port.
Insert the other USB connector into
the USB port on PC to start charging.
Connecting to Car Charger
Insert the USB connector into the
appropriate USB port.
Insert car charger connector into
vehicle 12V accessory/cigarette
socket to start charging.
NOTE:
Please connect the car charger to vehicle 12V accessory/cigarette
socket after the vehicle engine is started to protect the device from
sudden surges in current.
Device Connections Device Connections

EN -4
EN
About Rechargeable Battery
The device is equipped with a built-in rechargeable battery. Please fully charge the battery
(for at least 5 hours) before initial use. The battery status indicator glows in red color when
charging and turns bright green color when charging is complete. Charging time is
approximately 4 hours.
Working conditions and precautions for the rechargeable battery
Devices with new batteries should be fully charged before initial use.
It is not necessary to start charging the device before the battery is fully discharged.
1. Press and hold Power Button to turn
on the device.
2. Shortly after the greeting screen is
shown, the main menu will be
displayed.
3. Tap the corresponding buttons with
touch pen included to navigate
through various functions.
4. Press and hold Power Button to turn
the device off or to allow the device to
enter sleep mode.
5. Tap Sleep icon to put the device to
sleep mode or Power Off icon to turn
the device off.
Getting Started
C
au
ti
ons on
B
a
tt
ery
Charging

EN-5
EN
In the main menu, tap on to
enter the device settings.
Tap to display other settings.
Volume Adjust sound volume, mute device, or enable warning messages.
Backlight Adjust the brightness of touch screen, enable/disable auto
backlight.
Language Select desired language.
DateTime Set up Time Zone/Date/Time.
Calibration Calibrate the screen when position deviation occurs.
FM transmitter Transmit audio signals from the navigator to radio sets.
USB Set the data transmission mode(Active sync or Mass Storage)
between the navigator and computer.
Factory Reset Restore all system settings to its factory default values.
1. Tap on DVR icon on the main menu
to start using DVR function.
2. Tap on to start or stop video
recording ; Tap on to play the
recorded video; Tap on to lock
the recording video.
3. Tap on to format the TF card &
start-up method of video; Tap on
to exit the DVR function.
4. Tap on to enter the setting
interface as left picture; Tap on
and , the device will run the
DVR function automatically when
power on; Tap on and ,
the IR lights will be running
automatically during the dark; Tap on
to exit the setting interface.
5. Tap on to enter the playback
interface as left picture.
6. Tap on to play the previous
video; Tap on to pause or
continue playing; Tap on to
stop playing the current video; Tap
on to play the next video of
previous videos; Tap on to
lock&unlock current video; Tap on
to return the DVR main interface.
(Note: For DVR, it’s a must to use TF card with Class4 at least)
DVR FunctionDevice Settings

EN -6
EN
The ADR player will be automatically generated after TF format. The file
will be shown on the screen once open the TF card by computer. Click ADR Player, the
interface will be as below: (Note: for more detailed info about ADR player, please refer to
CD)
①Video Display Area: Display the current playing video
②GPS Information Display Area: Display the GPS information of the current
video including GPS coordinates and driving speed
③
Map Display Area: When ADR Player has connected to Google Map via
network and the current playing video has GPS information record, the area
will display the drive route
④G-Sensor Display Area: Display G-Sensor information.
⑤Progress Slider Bar: Show the progress of playing video and end user can
drag mouse to any desired location on slider bar for playing video
⑥Video Group List: Display all video groups in the SD Card; Video group is a
combination of continuous video clips.
⑦Video Clip List: Display all video clips in the SD Card; ADR Player lists videos
in clips
Select a video group and press
save video button, the interface
will be as left figure; Check the
checkbox you want on the clip IDs
or check “ Save All” checkbox and
press” Save File” button to export
and save video clips to AVI files.
1. Tap on Bluetooth icon on
the main menu to start using
Bluetooth function.
2. The link status is shown at the
bottom of the interface.
3. Tap on to exit the current
function.
4. Tap on in Bluetooth
interface to start pairing with mobile
phone device with GPRS function.
5. Please make sure Bluetooth
function on mobile phone is
detectable by other devices.
6. “Connected established” will be
displayed upon the successful
pairing.
7. Tap on in Bluetooth
interface to enter the Phone
Keyboard.
8. Tap on digit buttons and tap on
/ / to start Dialing,
Backspace, and enter Dial Record.
ADR player of DVR Bluetooth Function

EN-7
EN
9. Tap on / to adjust the
volume. Tap on to end call.
10. Tap on to enter call record.
Tap on to enter keypad. Tap on
to switch the call to mobile
phone or switch it back to device.
11. The call fails to connect as
illustrated.
12. Tap on to return to Phone
Keyboard interface.
13. Calling number will be displayed
upon the Incoming Call.
14. Tap icon on Bluetooth
interface to enter Dial Record.
15. Tap on / / icons to view
Dialed Call list, Received Call list,
and Missed Call list. Tap on to
start dialing.
16. To delete a desired phone
number in the list, select the number
and tap on . Tap on to
delete all numbers in the list.
17. Tap on in the Bluetooth
interface to redial the last dialed
number.
18. Tap on in the Bluetooth
interface to enter Setting function.
19. Tap on to set a new PIN
code. Tap on /to select a
ring tone.
20. Tap on to enable/disable the
Bluetooth function. Tap on to
enable/disable automatic HFP
connection.
Bluetooth FunctionBluetooth Function

EN -8
EN
21. Tap on in Bluetooth
interface to enter Paired Device List
function.
22. Tap on to delete mobile
phone name from the list. Tap on
to disconnect the PND
(Personal Navigation Device) from
the mobile phone. Select mobile
phone name from Paired Device
List and tap on to enter Profile
list.
23. Tap on to re-connect from
previously connected mobile phone.
Tap on to disconnect the PND
(Personal Navigation Device) from
the mobile phone.
24. Tap on in Bluetooth
interface to start searching process.
25. Pairing devices(mobile phones)
will be displayed in the list when
search is completed.
26. Tap on the mobile phone name
and tap on to pair. Tap on
to enter Paired Device List.
27. Tap on to enter Phonebook.
28. Tap on to download the
phone numbers of the mobile phone
to the PND (Personal Navigation
Device).
29. Tap on to dial the phone
number.
30. Tap on to delete mobile
phone name from the list.
1. Tap on Function icon on the main
menu.
2. Tap on FM icon to start using
Bluetooth function.
3. Tap on /or drag the cursor to
tune FM frequency down/up.
4. Tap on to save current FM
station.
5. Tap on to enable the FM
function.
6. Tap on to exit.
（Note: Please make sure GPS is connected to the car charger before using FM
Transmitter）
Bluetooth Function Bluetooth Function
FM Function

EN-9
EN
No. Name Function
1 Sound Sound menu opens by pressing this button
2 Compass
Context menu opens by pressing this button. In this menu
switches the orientation of the map («North up» - lock icon is next
to the compass, «Rotate in accordance with the movement» -
route is next to the compass), the type of card (Flat view «2D» and
the Panoramic view of the «3D») and the skins («Night», «Day»,
«Auto»). When driving the compass always points to the North.
3 Information
panel
A sign of the upcoming maneuver. There are various turns,
distance to the next maneuver in meters or kilometers, etc. on a
gray background. Clicking on the sign stops the route guidance
and more route options.
4 Information
panel
The estimated total time in a way, the total length of the route, time
of arrival at the final point of the route.
5 Route The active route.
6 GPS-cursor Your location indicator.
7 Menu Main menu opens by pressing this button.
No. Name Function
8Progress-bar Bar is filled in as you approach the place of maneuver.
9Traffic lane Displays the traffic lanes with valid maneuvers at the next
intersection.
10
Information
panel
Shows the name of the street you are currently driving along.
Available only if GPS/GLONASS connection is established. If
there
is no street name, the direction will be shown.
11 Scale button Zoom out.
12 Scale button Zoom in.
13 Navitel.Events * Navitel.Events button
14
Speed limit
and camera
In excess of the established speed displays the speed limit on
that road section.
If warning of the cameras turned on in the settings, then when
approaching the
camera distance to it displays.
15 Battery Icon shows the level of battery charge. Press it to see the
remaining memory.
16
GPS
GPS/GLONASS connection icon. If the indicator is grey —
receiver is disabled, red — switched on, but the connection is
not established, yellow - poor connection, green – connection
established. There is a number of the satellites in the dot.
17
Navitel.Friends
Pop-up menu to work with Navitel.Friends service. Here you
can add friends, see them on map
and talk to them.
18 Route panel Allows you to see the entire route, your location and traffic
jams* on the route directly on the Map page.
Program interfaceProgram interface

EN -10
EN
No. Name Function
19 «Save» Saves current marc on map as a waypoint.
20 «Cursor» Shows the point menu.
No. Name Function
21 Mark on the
map
You can set the mark by taping on the map. You can save this
mark as a waypoint, add it
to the route or see object’s characteristics the mark was set on.
22 Track record Track record. Red dot means that the track is recording, grey
dot means that the record stopped.
23 Traffic Jams* Shows the current traffic jams on a 10-point scale.
24 Navitel.SMS* This button is intended to read/send SMS-messages. Near the
icon you can see the number of unread messages.
25 Software
update* Shows available updates.
26 «Go!» Marks the current position on the map as the end of the route
27 «Route through» Mark becomes the start point on the route. You should turn off
your GPS/GLONASS receiver.
28 «Set start» Mark becomes the middle point of the route.
29 «Set finish» Mark on the map becomes the end of the route. And previous
end of the route becomes the middle point.
30 Map Back to map.
* - This function is available only on some devices with GSM or Bluetooth with
DUN support. Please, refer to your supplier for more information.
Program interfaceProgram interface