Prestigio multipad pmp5080b Quick start guide

Firmware upgrade procedure (32bit)
Caution:
The firmware upgrading may destroy your data of PMP5080B, please back up your data before
upgrading.
Update is compatible only with 32bit OS
It may be not compatible with USB port driver. Try to change connection to another front/rear
USB-port because you have variety of USB 1.0/2.0/3.0 on PC.
1
Driver installation
If there’s no ROCK USB driver with
your PC, driver installation will be
necessary for the upgrading.
Power off your PMP5080B, press and
hold the “VOL MINUS”button then
connect the device with PC via USB
cable.
A “Installing device driver…”window
should pop up in the task bar of
desktop.
A “Device driver software was not
successfully installed…” window
should pop up.

Right click Computer in the desktop,
and then click on Properties.
Click on Device Manager.
Click on Other devices, then
double click Unknown device to
continue.

Click on Driver, then click on Update
Driver…to continue.
Click on “Browse my computer…”.
Click on “Browse…”to locate the
driver manually.

Select “Drivers_x32\...”in
accordance with your OS, and then
click on Ok.
Click on Next to continue.
It will show “Installing driver
sogtware”in the window.

A Windows Security box should
pop up, click on “Install”.
Click on Close to complete the
driver installation.

2
Firmware Upgrade
2. Firmware upgrade
a. Open upgrade tool “RKBatchTool.exe”
Power off your PMP5080B, press and
hold the “VOL MINUS”button then
connect the device with PC via USB
cable.
c. Device Upgrade Area will become GREEN COLOR

d. Please choose IMAGE file path.

e. Please click ‘Upgrade’ Key to upgrade.
5. If upgrade successfully, such as below picture, the device would be turn on automatically.
Initial start should be performed without SD card