Primus PrimeLite Race Installation instructions
PRIMUS
PrimeLite Race Headlamp
®
! Always dispose of the batteries in a place
intended for them.
! Make sure that you use batteries (4 x AA/LR
6) of good quality. Never mix new batteries
with old ones, or different makes.
! Maximum temperature for use, 60 °C.
! The light source of the lamp is a Luxeon
Rebel™ LED diode which has a very long
operating life.
The guarantee is for 1 year as regards material
faults and/or manufacturing faults. The
guarantee does not apply for normal wear.
− Unscrew the screw as shown in gure 1,
open the battery case and insert the batteries.
Follow the instructions in the lamp. Make
sure you get correct reverse polarity (+/-).
Assemble the battery case by closing the lid
and screwing down the screw again.
− Adjust the headband so that the lamp rests
comfortably on your head.
- The lamp is now ready for use.
- Turn on the lamp by pushing the button (2)
for 2 seconds.
- Switch mode by pushing the button shorter
periods. The front part of the head lamp
can be angled to produce the best possible
lighting in various situations.
- The storage bag for the head lamp also
functions to subdue the light, for example, in a
tent. Switch the lamp on and put it in the bag
and you will have comfortable illumination.
Distributed by
PRIMUS AUSTRALIA PTY LTD
Bundoora Victoria 3083
www.primusaustralia.com.au
The lamp is switched on with minimum (25%) light strength
The lamp is switched off
The lamp is switched on 50% of its light strength
The lamp is swtiched on with full light strength
Back to lowest light strength
The PrimeLite Race can be switched off between each step.
Each restart always has the minimum light strength.
2 sec
2 sec
Table of contents
Other Primus Headlamp manuals
