Primus 522390 Installation instructions

User Manual and Product Specications
Part No. 522390
Portable Power Pack 44Ah

Portable Power Pack 44Ah
www.companionbrands.com.au
1
Contents
Safety
• Please read, understand and follow the
instruction manual before rst use.
• Never expose the Power Pack to rain, water,
snow or excessive moisture.
• When charging the Power Pack, DO NOT
expose to open ame or cigarettes.
Images for illustrative purposes only
44Ah Portable Power Pack x 1 4A 240V AC adaptor x 1 12V DC adaptor cable 1.5M x 1
Features
1
2
3
4
5
8
6
9
10
11
7
Digital LCD display with
voltage and (amperage) meter
Heavy duty ABS case with
folding carry handle
12V DC cigarette lighter
socket and 12V DC merit
socket power outlets
Individual on/off switches
with LED indicator
Overload protection with
resettable circuit breaker
5V DC 2A USB port with
on/off switch
Charge input via AC and
DC adaptor (included)
Solar charge input via
Anderson plug (plug
not included)
Low Voltage Warning
(RED) LED indicator with
audible alarm
Charging (GREEN)
LED indicator
Fully Charged (YELLOW)
LED indicator

User Manual and Product Specications
2
• Provides portable power supply for 12V
DC fridges, 12V lights and other 12V DC
appliances.
• Provides USB port for charging 5V DC
appliances i.e. mobile phones, tablet,
digital camera etc.
• Multiple charging options by 240V AC
adaptor, 12V DC adaptor and solar panel
charger via Anderson plug socket (note:
solar panel charger, and Anderson
plug not included).
5
4
3
7
9
6
8
10
11
12

Portable Power Pack 44Ah
www.companionbrands.com.au
3
Instructions for use
Power appliances:
1. Simply connect the appliance’s power plug into
the corresponding socket: A, B or C.
2. Press the on/off switch. The LED indicator
should illuminate to show the power is supplied to
the socket.
3. Press the USB switch ON when charging 5V DC
appliances via the USB port. The USB (GREEN)
indicator light will illuminate.
Overload protection:
12V DC output:
When an overload of 15 Amp power draw is
detected on a single DC output socket, the circuit
breaker will automatically turn off the power to
the socket to protect the Power Pack. Switch
OFF the DC output socket and disconnect the
appliance from the Power Pack. Press the circuit
breaker reset button to resume the power supply.
Reconnect the appliance and switch ON the DC
output socket.
When an overload of 16 Amp combined power
draw is detected from both DC output sockets,
both circuit breakers will automatically turn off
the power to the sockets to protect the Power
Pack. Switch OFF one of the DC output sockets
and disconnect that appliance. Press both circuit
breaker reset buttons to resume the power supply
and reconnect one of the appliances only. Switch
ON the DC output socket.
5V DC USB port:
If a power overload is detected while charging
a 5V DC appliance, the USB power supply will
automatically reset within 2 minutes after the
appliance has been disconnected from the
USB port.
12V DC Cigarette
lighter socket
12V DC Merit
plug socket
5V DC USB
port
A B C

User Manual and Product Specications
4
Digital LCD display:
When the Power Pack is in use with an appliance
connected, press the DISPLAY SWITCH and the
Digital LCD display will show the VOLTAGE (V) of
the Power Pack and the CURRENT (A) amperage
used by the appliance.
When the voltage decreases to 11.5V, the
display will automatically continue to show the
amperage draw and voltage until the Power Pack
is recharged.
When you press the DISPLAY SWITCH with no
appliances connected, the Digital LCD display
will show the voltage of the Power Pack and zero
(00.0) amperage.
When charging with AC, DC adaptor or solar panel
charger, the LCD display will show the voltage and
amperage the Power Pack is receiving.
If the Power Pack is connected with an appliance
and charged at the same time, the LCD display will
show the voltage and amperage that the Power
Pack is receiving.
Low Voltage Warning:
The Power Pack is equipped with a Low Voltage
(low battery capacity) Warning system that
activates automatically when the Power Pack
voltage decreases to a low voltage level.
When the Power Pack is in use and the voltage
decreases to 10.5V, the unit will automatically
switch OFF and the Low Voltage Warning indicator
(RED) will commence ashing with an audible
single beep every 5 seconds for 10 minutes.

Portable Power Pack 44Ah
www.companionbrands.com.au
5
Low Voltage Warning: Continued
IMPORTANT: THE POWER PACK MUST NOW
BE RECHARGED
When the Power Pack is stored or not in use and
the voltage decreases to 11.5V, a single beep will
continue every 10 minutes as a rst alert warning
to charge the Power Pack.
If the Power Pack is not recharged and the voltage
continues to decrease to 10.5V, the unit will
automatically switch OFF and the Low Voltage
Warning indicator (RED) will commence ashing
with a single beep every 5 seconds for 10 minutes.
The Low Voltage Warning indicator (RED) will then
remain illuminated and the audible beep will stop.
TO MAXIMISE THE PERFORMANCE AND
BATTERY LIFE OF THE POWER PACK FULLY
CHARGE EVERY 3 MONTHS.
Charging the Power Pack:
Using 240V AC and 12V DC adaptor (included)
Simply plug the adaptor into the CHARGE INPUT
on the Power Pack and then connect to 240V
or 12V power supply. The Charging (GREEN)
indicator will illuminate.
The Fully Charged (YELLOW) indicator will
illuminate when the Power Pack voltage is
fully recharged.
Estimated charging time:
Using 240V AC 4A charger: 8-10 hrs.
*Using 12V DC adaptor cable:
Only suitable for Power Pack ’Top Up’
maintenance charge only.
Maintenance
• Check the Power Pack capacity regularly
(minimum once a month) and charge the Power
Pack as required.
• When the low capacity warning occurs, fully
charge the Power Pack immediately before use.
Using solar panel charger via Anderson
input socket:
Insert the Anderson plug from solar panel charger
into the Anderson input socket on the side of the
Power Pack.
IMPORTANT
When using appliances with high current draw,
i.e. portable fridge, it is recommended to use a
solar panel charger in conjunction with the Power
Pack. The solar panel charger should be equipped
with a regulator and the maximum charging
current output MUST be less than 6A. Check
the solar panel charger before connection. It is
recommended to use a maximum 80W solar
panel charger.

User Manual and Product Specications
6
Service
For enquiries please contact Customer Service
Telephone: [phone] (Mon–Fri 8.30am–5.30pm AEST)
[e-mail]
Technical Specications
Output Voltage 12V DC and 5V DC (USB)
Battery Type 2 x 22Ah AGM (Absorbed Glass Mat) batteries
Output
12V/15A cigarette lighter socket x 1pc
12V/15A heavy duty merit socket x 1pc
5V/2A USB port x 1pc
Overload
Protection
15A circuit breaker x 2pcs
Low voltage warning system with LED
indicator and audible alarm
LCD Display Digital voltage and current (amperage) display
Charging Options
4A 240V AC adaptor (included)
12V DC adaptor (included)
Solar Panel charger via Anderson input socket
(Anderson plug not included)
Maximum
Charging Current 6A
Weight 16kg
Size 33 x 31 x 29cm

Distributed by
Companion Brands
Bundoora Victoria 3083
www.companionbrands.com.au
PRI6683