Prince Castle 470-C User manual

OPERATING
INSTRUCTIONS
Hardwood High Chair
Model No. 470-C
355 East Kehoe Blvd. lCarol Stream, IL 60188
Tel: [phone] lFax: [phone]
Toll Free: 1-800-PCASTLE
Printed in 2001
Prince Castle Inc.
REV. A 470-504
SPECIFICATIONS
Dimensions:
OverallHeight: 29-1/4”(74.3cm)
TableClearance: 27” (68.5 cm)
Width at Base: 21-1/8”(53.6cm)
Depth at Base: 20-5/8”(52.3cm)
ShippingWeight: 15 lbs (6.8 kg)
PrinceCastle'smodel470-CHardwoodHighChairissafe,
attractive, and keeps your youngest customers sitting in
comfort. Thissolidlyconstructedhighchairfeaturesastain
resistant finish and fits virtually any decor. Designed for
commercialuse,thishighchairisequippedwithnylonsafety
strapsboltedtotheseatbottom,apositive-lockbuckle,and
fourinchcastersontherearwheels.Thishighchaircomes
fullyassembled andready foruse.
This product is warranted to be free from defects
inmaterialand/orworkmanshipforaperiodof(1)
year fromdateoforiginalpurchasenottoexceed
18monthsfromdateofshipmentfromourfactory.
Any component which proves faulty in material
and/or workmanship within the warranty period
willbereplacedorrepaired(attheoptionofPrince
Castle, Inc,) without cost to the customer for
parts or labor.
This warranty is subject to the following
exception/conditions:
Damagecausedbycarelessness,neglect,and/or
abuseandmisuse(e.g.,dropping,tamperingwith
orimpropermaintenance)is notcovered.
Equipmentdamagedinshipment,byfire,floodor
an act of God is not covered.
Any use of non-genuine Prince Castle replace-
mentsparepartsvoidsthiswarranty.Allgenuine
Prince Castle replacement spare parts are war-
rantedforninety(90)daysfromdateofpurchase.
WARRANTY
WORLDWIDE

PARTS
1. Always refer to the Parts List in this manual. Part
numbersareneededforreferencewhenordering.
2. All replacement parts should be purchased from
your local Prince Castle Service Agency or your
local Prince Castle Distributor.
3. RETURNS: All inoperable warranty parts must be
returnedtotheServiceCenter.
INSTALLATION
1. Afteryouhaveremovedthe unitfrom thecarton,
inspect the unit for signs of damage. If there is
damage to the unit:
lNotifycarrierwithin 24hoursafterdelivery.
lSavecarton andpacking materialsforinspection
purposes.
lContact the Prince Castle Customer Sales
Departmentat1-630-462-8800oryourlocal
PrinceCastledistributer toarrange for
a replacement to be sent.
2. Verifythatallpartshavebeenreceived.
ToolsRequired: 1/2” Open EndWrench
1/2” Socket w/Ratchet
IMPORTANT: Wheels mount on the outside of chair
frame. See figure 1.
3. Insert axle of wheel assembly through chair frame.
4. Install washer on inside of frame, then install
locking nut.
5. Using wrench on outside of wheel, with socket
wrench on inside of frame, tighten the lock nut.
6. Repeat steps 1-3 for second wheel.
OPERATION
CAUTION: When a child is in the chair
always fasten his/her seat-belt. Never
leave a child unattended. Any child using
the high chair should be secured by the
restraining strap and crotch strap at all
times.
To use the seat belt simply push the clasp into the
buckle. To release squeeze the top and bottom edge
of the buckle and pull apart. See figure 2.
CLEANING
Wipe the entire chair with a clean cloth soaked in a
mild soap solution. Afterwards, wipe the chair down
with a dry, clean cloth.
PARTS LIST
Item Part No. Description
1 470-4 Restraining Strap Kit
2 470-2 Crotch Strap Kit
3 470-12 Wheels (Pkg. of 2)
WHEEL
FLAT WASHER
FLAT
WASHER
5/16”
LOCK NUT
figure 1
figure 2
1
2
3