Prior Scientific ProScan III User manual

CONNECTIONS
IM ORTANT SAFETY
INFORMATION
LEASE READ THE MANUAL BEFORE USING!
THE MANUAL IS AVAILABLE FROM RIOR SCIENTIFIC AND
SHOULD BE READ AND UNDERSTOOD BEFORE INSTALLATION
AND USE. THE MANUAL IS AVAILABLE FROM WWW. RIOR.COM
• Adhere to all war i gs o the product a d i the user ma ual.
• This product MUST NOT be exposed to ope flames extremely hot
or cold temperature, water or moisture. DO NOT allow objects to
fall, or liquids to spill, o the product.
• The ProSca III is a Class 1 system a d must be grou ded.
• Co ect the AC power cord o ly to desig ated power sources as
marked o the product. Make sure the electrical cord is located so
that it will ot be subject to damage.
• E sure the co ectio to the power source a d the fro t pa el
power switch are easily accessible.
• Do ot co ect or disco ect a ythi g to or from the ProSca III
u less the co troller is tur ed off first.
•DANGER – Never alter the AC cord or plug. The power cord set
must be a appropriately rated a d approved cord set i accorda ce
i the regulatio s of the cou try it is used i . If the supplied plug
adapter is ot the correct fitti g for your geographic area or if you
are u sure about the releva t regulatio s, please co tact your
supplier for advice.
•Do not attempt to disassemble, tamper or repair this product; it
contains NO user serviceable parts and doing so may void the
warranty. Service should be performed ONLY by authorized service
ce ters.
• Clea o ly the exterior of this product usi g a damp, li t free cloth.
• I stalli g older revisio firmware is ever recomme ded a d may
re der u it i operable.
• Please co tact Prior for i formatio o updati g co troller firmware
if deemed ecessary. New u its ship with the latest firmware a d
should ot eed updati g.
• lease contact rior Scientific at 781-878-8442 or an approved
representative if you have any questions or comments.
ALWAYS MAKE SURE THE OWER TO THE ROSCAN III IS OFF
BEFORE CONNECTING OR DISCONNECTING ANY COM ONENTS
Focus Encoder Z Encoder Y Encoder X Stage A Axis Filter 1 Filter 2
RS232-1 RS232-2 USB Joystick
TTL Shutter
3
Shutter
2
Shutter
1
ower On/Off ower Socket CANBUS
H31ADF Add On Module

ROSCANTM III QUICK SET U
Control Stage
Focus Illumination
ALWAYS MAKE SURE THE OWER TO THE ROSCAN III IS OFF BEFORE CONNECTING OR DISCONNECTING ANY COM ONENTS
Ensure the correct encoder cable goes into the correct port. Read manual before use (www.prior.com).
Connection between roScan III and rior device Encoded connection between roScan III and encoded rior device
www.prior.com
Product-V1-1122-EN-US
Computer