Pro-4 Tactical Flashlight with Multi-Tool User manual

Flashlight with Multi-Tool
Instruction Manual
• Installing 3 AAA Alkaline Batteries
• Turning ON / OFF - Switching Light
Modes
• Zoom In / Out
• Tools
• Maintenance
• Warnings
• Troubleshooting
Instructions
14+
AGES
QR CODE
Designed, Imported,
and Distributed by:
Pro-4 Marketing
32411 Industrial Drive
Madison Heights, MI 48071
Tel: [phone]
Toll Free: 1-833-776-3687
www.Pro-4Tactical.com

Unscrew Flashlight head.
Remove battery pack
Insert battery pack into ashlight with positive
(+) end exposed. Replace Flashlight head
Insert 3 AAA batteries according to polarity
(+/-) as indicated on battery pack
Installing 3 AAA Alkaline Batteries
123
FRESH ALKALINE BATTERIES ARE STRONGLY RECOMMENDED.
DO NOT MIX OLD AND NEW, OR DIFFERENT TYPES OF BATTERIES
Turning ON / OFF - Switching Light Modes
To turn ashlight ON / OFF, rmly press the
ON / OFF button. You will hear a “click,”
and the light will turn ON. Firmly press
again, and the ashlight will turn OFF.
Note: The next time the button is pressed,
the light will advance to the next mode.
CLICK
To cycle through light modes (without
turning the ashlight o), press button in
halfway. The button will not click, and the
light will advance to the next mode.
4 LIGHT MODES:
High Power Light
Medium Power Light
Low Power Light
Flashing Red Hazard
1
2
3
4
Zoom In For a long, narrow, focused light beam, push
Flashlight head to the front end of Flashlight, as shown
Zoom Out For a broader light beam, push Flashlight
head toward the back end of the Flashlight, as shown
1
1
2
2
Zoom In / Out

To replace Glass Breaker, hold
switch open; manually fold
Glass Breaker into handle;
release switch
To use all other tools, unfold desired
tool from Flashlight handle. Tools
include: Flat Head
Screwdriver; Sharp
Knife; Phillips Head
Screwdriver; Bottle
and Can Opener;
Small Pry Bar;
Scissors; 6mm and
8mm Allen Wrenches
• Clean Flashlight with Multi-Tool with a
clean, dry cloth as needed; dry after use
• Remove and store batteries when not
in use for 90 days or longer
• Lubricate moving parts with standard
consumer lubricant as needed
• Use a standard consumer knife
sharpener to sharpen knives and
scissor blades as necessary
• Knives and other tools are very sharp; use
caution with these and all sharp-bladed objects
• Keep blades sharp, a dull knife can be more
dangerous to use. Use all tools for their intended
purpose only
• Follow City Ordinance Guidelines for proper
disposal of dry cell batteries
• Flashlight should be used for the intended
purpose of providing illumination only
• Recommended for Ages 14+.
Keep out of reach
of children
Maintenance
Warnings
Belt and Rope Cutter is
designed to quickly release
bound items. Slide belt or
rope into notch on side of
Flashlight; use enclosed
blade to cut belt or rope
Striker Head surrounds
Flashlight lens.
To use Glass Breaker,
slide switch toward top of
Flashlight; Glass Breaker will
deploy automatically.
Tools
1
2
3
4
1
2
3
4
If the Flashlight does not turn on, works intermittently; or has a weak light:
• Remove and replace batteries. Be
sure battery pack is properly inserted
• Be sure Flashlight head is screwed
on tightly, and batteries are inserted properly
in battery pack
Troubleshooting
• If problem persists, contact Pro-4
Tactical for technical advice
• See www.Pro-4Tactical.com for
Warranty and Replacement Information
WARNING: This product can expose you to chemicals, including benzene and ethylbenzene, which are known
to the State of California to cause cancer. For more information, go to www.p65Warnings.ca.gov

No Questions Asked!
Flashlight with Multi-Tool
1YearWarranty
Send warranty slip to: Pro-4 Marketing, 32411 Industrial Drive, Madison Heights, MI 48071
Register your unit online: www.Pro-4Tactical.com/warranty-registration.
Pro-4 Tactical will repair or replace your nonworking unit FREE of charge within one year of purchase. To register
your Pro-4 Tactical product so it becomes eligible for coverage under our 1-Year, No Questions Asked Warranty, please
complete product registration by mail or on our website.
Name: Phone:
Email:
Address:
City: State: Zip:
Store Where Purchased:
Date of Purchase:
Month Day Year
Once you have registered your new product, you can make a claim to have your Pro-4 Tactical item replaced.
You MUST send in the following: Proof of purchase (store receipt), your contact information, a description of the problem,
and your nonworking product.
NOTE: You MUST register your product before requesting service. Registration must take place within 2 weeks
of purchase. You may also complete registration and send with the above items (within 2 weeks of purchase). If you do not
have a store receipt, indicate where and when you purchased your product.
- OR -
PRO-4 TACTICAL PRODUCT REGISTRATION FORM