Pro-Ject Audio Systems T1 Phono SB User manual

1Unpack all items from accessory bag. 3
Remove dust cover carton from the box.
4Remove the protection covering. 67
Unpack the power supply.
8
Unpack the platter.
9
Put the drive belt on the pulley
& sub-platter.
10 11
T1 Setup Guide
Please read before unpacking.
Getting started:
• Make sure to have enough space to unpack your turntable.
• Always unpack and setup in a clean enviroment.
• Important for warranty: Do not throw packaging away.
• Setup is demonstrated with T1 Phono SB.
2Lift the wrapped turntable
out of the box.
5
Put the platter on the turntable.
a) Connect it E (RCA cable)
Detachable cable only included with T1 Phono SB & T1 BT
b) Drive belt
c) Stylus pressure gauge
d) Adapter for 7“ singles
a)
b)
c)
d)
T1
>
>
T1 Phono SB
T1 BT
Connect to any amp with integrated phono amplier or use an
external phono preamp.
Pre-mounted Connect it E (RCA cable) included.
Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and
Pro-Ject MaiA S2 (stereo integrated amplier).
Select Line Out to connect to an amplier without a phono
stage. Select Phono Out if you have an amplier with a phono
stage.
Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and
Pro-Ject Stereo Box S2 (smallest audiophile integrated amp).
Select Line Out to connect to an amplier without a phono
stage. Select Phono Out if you have an amplier with a phono
stage. Enjoy the warmth of vinyl with the comfort of wireless
technology.
Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and
Pro-Ject Stereo Box S2 (smallest audiophile integrated amp).
Speaker cable Speaker cable
Connect it E (RCA Cable)
Speaker cable Speaker cable
Connect it E (RCA Cable)
Put the felt mat on the platter. Remove tonearm twist tie. Connect to your hi-system
and enjoy your music!
Speaker cable Speaker cable
Connect it E (RCA Cable)
Speed Change:
Small pulley 33 RPM
Large pulley 45 RPM
T1 Phono SB: Speed Selector 33/45
Beware of breaking the needle!