PRO SIGNAL PSG03640 User manual

1
4x2 HDMI Matrix Switcher with Audio
PSG03640
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

2
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
When using electrical appliances basic safety precautions should always be followed.
• To prevent fire or shock hazard, do not expose this product to rain or moisture.
• Beware of static electricity which may damage the device. Use ESD precautions
when installing.
WHAT'S INCLUDED
• 1Main unit
• 5V DC Power Supply
• Remote Control
• User Manual
• Switches easily between any four HDMI sources.
• Distributes any of the four inputs to any or any combination of the two HDMI output
displays.
• Supports audio output simultaneously : Stereo, Toslink and Coaxial.
• “2CH” and “5.1CH” can be selected using Remote control for outputA. 5.1CH can
be sent by Toslink and Coaxial.
• Supports highest video resolution 1080p.
• Supports 225MHz/2.25Gbps per channel (6.75Gbps all channel) bandwidth.
• Supports 12bit per channel (36bit all channel) deep colour.
• Supports HDCP.
• Supports uncompressed audio such as LPCM.
• Supports compressed audio such as DTS Digital, Dolby Digital (including DTS-HD
and Dolby True HD).
• Support 3D all format, including [email protected]/24Hz, [email protected]/60Hz/50Hz,
bandwidth up to 225MHz.
• The HDMI SWITCH SPLITTER Matrix routes high definition video in multiple
resolutions up to 1080p plus multichannel digital audio from any of the four HDMI
sources to two displays. Two outputs give you the choices of sending high definition
audio and video signals up to two displays.
• At the same time, when you select Output A as the output, the audio signal will be
separated and transmitted to the amplifier by Stereo, Toslink or COAX (RCA).
• Any four to any two matrix switching allows for maximum versatility for integrated
systems.
• Supports HD-DVD players, Blue Ray, DVD, PS3, and satellite set top boxes that
connect to two HDMI displays.
• Every source is accessible at all times on any display by selecting it with the IR
remote.
OVERVIEW
FEATURES
CLEANING & MAINTENANCE
• Clean the outside casing and remote control with a soft cloth lightly moistened with
mild soap and water. Never use any abrasive or solvents.

3
INSTALLATION
CONNECTION DIAGRAM
• Connect the source devices using high quality HDMI cables to the input ports on
the splitter
• Connect the splitter output HDMI ports to the twin displays.
• Connect the audio outputs to external amplifiers or display sound inputs.
• Connect the 5V DC PSU output to the splitter input port and turn on the power
switch and the power indicator will illuminate.
PSG3429

4
SPECIFICATIONS
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
Made in China
PO Box 13362 Dublin 2
PR2 9PP
Man Rev 1.0
Mechanical switching.
• The Select A button can select four sources to display on the Output A device.
• The Select B button can select four sources to display on the Output B device.
Remote Control Functions.
• The two OFF buttons can control the output A and B separately, in order to switch
off unwanted output signals.
• On the panel A, the buttons 1-2-3-4 on the remote control are used select source
device connected to output A.
• On the panel B, the buttons 1-2-3-4 on the remote are used to select the source
device connected to output B.
• The Mute button will control the Audio output from Stereo, Toslink and Coaxial
•
Audio Output Select
• 2CH and 5.1CH audio can be selected using remote control for output A.
• Only when the source supports 5.1CH output (including CD), selecting this function
is possible using the 2.1CH and 5.1CH buttons on the remote control.
• Press “2CH” button, the product outputs 2CH audio and the LED turns off;
• Press “5.1CH” button, the product outputs 5.1CH audio and the LED turns on.
• By default 5.1CH audio output is selected. If the source can only supports 2CH
audio output, the “5.1CH” button will become inoperative and the LED is still lit.
Note: 5.1CH audio can only be output by Toslink and Coaxial.
WARNING.
Do not press buttons in rapid succession. Please leave aprox 1 second between each
button press to allow the switching to action or failure to output any display may occur.
Input Video Signal 5 Volts p-p (TTL)
Maximum Single Link Range 1920x1080P
Output Video HDMI
Vertical Frequency Range 50/60Hz
Video Amplier Bandwidth 2.25Gbps/225MHz
Resolution HDTV (50&60Hz) 480i,576i,1080i, 480p,576p,720p,1080p
Size (L-W-H) 258mm x 112mm x 26mm
Operating Temperature 0oC - 70oC 10% to 85 % RH
Weight (Net) 0.73KGs
External Power Supply 5V DC@2A
CPC Farnell declares that the radio equipment for wireless transmitter/receivers is in
compliance with Radio Equipment Directive 2014/53/EU