PRO SIGNAL PSG3060 User manual

PSG3060
HDMI1.4 2x2 MATRIX WITH EDID

WHAT’s IN THE BOX
OVERVIEW
IMPORTANT SAFETY INFORMATION
INSTALLATION
• This device can connect and switch two HDMI sources to two HD displays.
• Either input can be switched to both displays simultaneously.
• Can be used with DVD, Blue-Ray DVD, STB, HD Player, PS3, PS4, XBOX, PC etc.
• Main unit.
• PSU.
• Remote Control.
• User’s Manual.
Please read these instructions carefully before use and retain for future reference.
• Please make sure all devices you wish to connect have been powered off.
• Connect two source devices to the switcher inputs using appropriate HDMI cables.
• Connect both the outputs to two display using appropriate HDMI cables.
• Connect the PSU power cable to the converter and connect to a mains supply.
• The power LED lights when the power is applied and the mains is switched on.
• Pressing the OUTPUT buttons on the input panel or on the remote control will switch
between the two connected input HDMI sources.
• Setting the EDID dip switches determines the output format extracted from the input
signal (see table).
(1) DC POWER INPUT PORT
(2) HDMI OUTPUT PORT A
(3) HDMI OUTPUT PORT B
(4) HDMI INPUT PORT 1
(5) HDMI INPUT PORT 2
(11) REMOTE CONTROL RECEIVER
(12) B OUTPUT PORT STATE
(13) OUTPUT B STATE
(14) OUTPUT B SELECT
(15) EDID SELECTOR SWITCH
(6) POWER SWITCH
(7) POWER INSTRUCTIONS
(8) OUTPUT A SELECT
(9) OUTPUT A STATE
(10) A OUTPUT PORT STATE
• When using electrical appliances basic safety precautions should always be followed.
• Check that the voltage indicated on the rating plate corresponds with that of the local
network before connecting the power supply to the mains power supply.

FEATURES
Number EDID Selector Description
11111 1080P,Stereo Audio 2.0
21110 1080P,Dolby/DTS 5.1
3 1101 1080P,HD Audio 7.1
4 1100 1080I,Stereo Audio 2.0
5 1011 1080I,Dolby/DTS 5.1
6 1010 1080I,HD Audio 7.1
7 1001 3D,Stereo Audio 2.0
8 1000 3D,Dolby/DTS 5.1
90111 3D,HD Audio 7.1
10 0110 4Kx2K,Stereo Audio 2.0
11 0101 4Kx2K,Dolby/DTS 5.1
12 0100 4Kx2K,HD Audio 7.1
13 0000 Auto mode(default)
• Supports display resolutions up to 4Kx2K@30Hz,1080P@120Hz, and 1080P 3D@60Hz.
• 3D HDMI 1.4a video format support including frame packing for all 3D formats up to a
297MHz TMDS clock.
• Supports deep colour up to 48-bit per pixel.
• HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT).
• Supports the reception of any audio data conforming to the HDMI specication 1.4
such as L-PCM at up to 192kHz,compressed audio (IEC 61937),DSD,DST,DTS and
HBR).
• Supports colour modes sYCC601, Adobe RGB, Adobe YCC601, xvYCC extended
gamut colour.
• Operates for TMDS clock frequencies up to 300MHz.
• Supports EDID control via EDID Dip Switch Selector.

SPECIFICATIONS
MAINTENANCE
Power requirement 5V DC @ 1A
Output DDC signal 5 Volts p-p (TTL)
Max baud rate 10.2Gbps
Max bandwidth 340MHz
Deep Colour 36 bit
Max Single Link Range 3840x2160
Dimensions 150 x 64 x 25mm
Weight (not inc PSU) 0.3kg
Operating Temperature 0oC to +70oC
Operating Humidity 10% to 85% RH (no condensation)
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
Made in China. PR2 9PP
Man Rev 1.0
• Clean the outside casing with a soft cloth lightly moistened with mild soap and water.
Never use any abrasive or solvents.
• Do not allow moisture to enter the casing.