PRO SIGNAL 50-14445 Quick setup guide

Universal Replacement Television Stand
www.mcmelectronics.com Model 50-14445
Assembly / Use Manual
This universal replacement television base is intended use
with televisions with 39" diagonal screen measurement
or less, and weighing less than 30 pounds. Please note
that televisions differ greatly in size and weight distribution,
and no two installation circumstances are the same. It is
the users responsibility to ensure suitability of this product
for each individual situation.
Please read this document completely prior to use.

Identify and verify all of the included hardware
Step One:
A(x1)B(x 1 )C(x1 )D( x 1 )E(x1 )F(x1)H(x1)
G(
x8)
M 4x1 4 (x4)
M-AM
-
E (x 4 )M
-
F ( x8)
M5x1 4 (x4 )
M
-
B
M6x14 (x4)
M
-
C
M8x20 ( x4)
M
-
D
1
G
H
Attach parts
(F) and (C) using the provided screws
(G) for the right stand leg. Attach parts (E) and (D)
using the provided screws (G) for the left stand leg.
C
F
D
E

Step Two:
Step Three:
2
G
H
3
TV
TV
TV
M-A
M
-
B
M-C
M-D
M
-
E
M-D
M-FM-E
M
-
FM-E
M
-
D
M-F
B
A
Attach the completed left leg of the
stand with bracket (B) using the
provided screws (G). Attach the
completed right leg of the stand with
bracket (A) using the provided screws.
With care, lay the TV face down on a
flat surface with a towel or blanket
separating the two, to protect the
screen.
Attach the TV stand to the back of the
TV using the appropriate screw size and
spacer if needed.Be sure the screw is
tighten to the TV securely.

Step Four:
4
Orient to the TV to stand straight, check
its stability, and move it to its proper
location.

This completes the assembly steps of this stand.
As noted earlier, it is the ultimate responsibility of the user to ensure safe and secure
Installation of any television on this stand. There is no guarantee that every television,
even if within the size and weight limits specified, will be secure in every situation.
Once installation is complete, the user must make certain the television set is secure.
Failure to do so could result in property damage, electrical or fire hazard and personal
injury or death, should the television fall. Pro Signal, MCM Electronics and all retail
dealers providing this product cannot be held liable for damages that result from improper
or insecure installation.
Things to remember:
Furniture including tables, dressers, entertainment centers and shelves must be tested
to ensure stability
Televisions should be installed out of reach of small children or pets that could potentially
pull or knock a set from its location
Connecting cables, including power cords, cable, antenna or satellite TV wires, cables
from other components, indoor antennas and similar items should be secured and tucked
out of the way to prevent being snagged or tripped over
Televisions should not be located in direct sunlight or in locations where they can come in
contact with rain or moisture.
To provide added security, a Television Security Cable Kit, such as the Pro Signal
Model #50-14725 should be considered. A simple internet search should quickly
identify numerous places where this kit may be found.
In the event the user is not confident in the safety of this installation it is highly
recommended that a qualified installation professional be contacted.

Warranty
This device is warranted against manufactures defects for a period of 1 year from the original date of
purchase. This warranty covers all internal components and the cost of labor to either repair or replace
the unit. This warranty covers only the unit, and does not cover connected equipment, or any loss that
may occur, regardless of cause. It will be the sole discretion of MCM Electronics to determine the
applicability of said warranty, and determination as to whether the unit will be repaired or replaced.
Questions regarding application, use, or problems with this unit should be directed to MCM Electronics
Tech Support, which can be found at www.mcmelectronics.com.
www.mcmelectronics.com Model 50-14445