Pro Xk3190-ds3 User manual

XK3190-DS3

Weighing Display Controller（control

system weighing indicator）

Operation Command

V 1.01

Chapter 1 Technical Parameter 1

Chapter2 Installation 2

I. Front and Back Functional Schematic Diagrams of Indicator

II. Connection between Lload Cell and Indicator

III. Connection between Printer and Indicator

IV. Connection of Scoreboard

V. Connection of Serial Communication Interface

Chapter3 OperationMethod 8

I. Startup and Auto Startup Zero Setting

II. Manual Zero Setting (Semi-auto Zero Setting)

III. Tare Deduction Function

IV.SetDateandTime

V.UseofBattery

VI.InternalCodeDisplay

VII.SaveDataRecord

VIII. Operation of Printing

IX. Report Printing

X. Data Inquiry

XI. Operation of Eeliminating Record

XII. Input Method of Saved Tare

XIII. Power Saving Function

XIV. Adjustment of Display Brightness

XV. Switch between Gross Weight and Net Weight

Chapter4 MaintenanceandNotes 16

Chapter5 InformationCue 17

Appendix 18

Dearcustomers,

Pleasereadthiscommandbeforeusing

the indicator.

X K 3 1 9 0 –DS3

(1)

Chapter 1 Technical Parameter

1.Model: XK3190-DS3

2. Interface of digital load cell(s):

Interface mode: RS485

Transmission distance: ≤1000 meter

Transmission speed: 9600 baud

Signal power source: DC10V，≤400mA

Interface capability: ≤16 digital load cell(s)

Compatible protocol: Digital module protocol of the Company

Supporting

manufacturers:

Zhonghang Electronic Measuring Indicators Co., Ltd.,

ZEMIC Guangzhou Electrical Measuring Indicators Factory,

Ningbo BENUI Electric Co., Ltd.BENUI and Ningbo Board

Electric Co., Ltd. etc. manufacturers support the digital

sensor (load cell) of protocol of the Company.

Note: Each manufacturer may use different protocol.

3. Display: 7-digit super brightness white light LED display, 10 status

indicating lights.

4. Keyboard: Numberkeys 0~9

Functionkeys 24(10compositekeyswithnumberkeys)

5. Clock: For displaying year, month, date, hour, minute, second, leap year/month

automatically, without the influence from power break down.

6. Scoreboard display interface

Transmission mode Serial output, 20mA electric current loop signal

(constant-current source output)

Transmission baud rate 600

Transmission distance ≤2000 meters

7. Serial communication interface

Transmission mode RS232/RS422 (optional)

Baud rate 600/1200/2400/4800/9600 optional

Transmission distance RS232 ≤30 meters; RS422 ≤1200 meters

8. Printing interface

The indicator is equipped with a standard parallel printing interface

for connecting with ESPON LQ-300K(＋), Panasonic KX-P1131

and KX-P1121 etc. wide line printers.

9. Data storage

1000 sets of vehicle numbers and tare weights, 201 sets of article

numbers and 1001 sets of weighing records.

10. Application environment

Power source AC 100～264V, 50～60Hz

DC 12V7AH battery (optional)

Operating temperature －10 ~ 40℃℃

Storage and transportation temperature -25 ~ 55℃℃

Relative humidity ≤85%RH

Preheat time ≤30 minutes

Fuse 0.5A

11. Shape (mm) 290×75×210 (do not contain the size of bracket)

12. Self weight about 2.7 kilograms

X K 3 1 9 0 –DS3

(2)

Chapter 2 Installation

I. Front and Back Function Schematic Diagrams of Indicator

(Figure 2-1) Front Functional Schematic Diagram

(Figure 2-2) Back) Function Schematic Diagram

II. Connection between Load cell and Indicator

XK3190-DS3 is a digital weighing indicator. Therefore,

it can only be connected with digital load cell

(indicator). For easy indication, the product is called

as load cell (indicator) for short.

1. The load cell is equipped with 9 core connector for

connection. Meanings of all pins are marked in Figure

2-3.

(Figure 2-3) Digital load cell interface

Shield-T-R+T+R

+V-V

Battery

Capacit

Self-calibration|Gross/Net Weight| Accumulative Printing|Clear|Weighing

XK3190-DS3 Digital Weighing Display Controller

Interface of load cell

Interface of communication and

scoreboard

Interface of printerSocket of DC power

Power switch Socket of AC power

Calibration switch

X K 3 1 9 0 –DS3

(3)

2. Load cell interface of XK3190-DS3 adopts the interface mode of four-wire RS485 mode.

Table 2-1-1 Digital Load Cell Connection

III. Connection between Printer and Indicator

1. The printer is equipped with standard parallel output interface and 25-core RS232 connector

assembly. See definition of its pins in Figure 2-4.

(Figure 2-4) Printer interface signal

2. Printing directions:

▲! The printer may be used only after completing relevant settings. All relevant

paremeters of the printer must be set before using it.

▲! Connection between printing interface output pin of the indicator and the printer must

be accurate without fault. Only dedicated connecting wire for printing may be used.

(Indicator must be connected with printer by appropriative cable accurately.) If wrong

connection occurs, output interface of the indicator or that of the printer and even the

indicator and printer may be damaged.

▲! When using printer, connect all lines accurately at first, then switch on the power of

indicator and at last the power of printer. After use, please turn off the printer first

and then turn off the power of indicator and disconnect all the cables. Any reversed

operation may damage the indicator and printer. Please be careful.

▲! Printers are of various model and parameters, they may be not be compatiable with our

indicator. Please choose printers as remmended.

The printer must be equipped with reliable ground. Otherwise, this may disturb

regular performance of the indicator or even damage the indicator and printer.

IV. Connection between Scoreboard and the Indicator and Their Use

▲ ! Output pin of the scoreboard shall be connected accurately without fault. Error connection

may damage the output interface of indicator or that of scoreboard or even damage the

indicator and scoreboard seriously. The connection requires the use of dedicated connection

wires.

1. Interface of the scoreboard is 15-core RS232 connector (use in common with the serial communication

Indicator Interface Pins Sensor (load cell) Interface Pins …… Color of Corresponding Wire

No.

Definition Connection Method

Zhonghang Electronic

Measuring Indicators

Co., Ltd.

Guangzhou Electrical

Measuring Indicators

Factory

Ningbo Benui Electric

Co., Ltd. /Ningbo

Board Electric Co.,

Ltd.

2 Signal

transmission

negative (－T)

Connect Signal

reception negative

(－R)

Brown White White

4 Signal

transmission

positive (＋T)

Connect Signal

reception positive

(＋R)

Yellow Green Green

3 Signal reception

negative (－R)

Signal transmission

negative (－T)

White Yellow Light yellow or

brown

5 Signal reception

positive (＋R)

Signal transmission

positive (＋T)

Blue Blue Blue

6 Positive pole of

power source (＋V)

Connect positive pole

of power source (＋V)

Red Red Red

9 Negative pole of

power source (－V)

Connect negative pole

of power source (－V)

Black Black Black

1 Shield Connect the shielded

wire

―― ―― ――

nal

roun

Optional

X K 3 1 9 0 –DS3

(4)

interface《sharing with serial communication interface》). See Pins 9 and 10 for definition of its pins in

Figure (2-5).

Signal of scoreboard is current loop or RS232 signal and it is output serially in binary code with

baud rate of 600. Each frame has 11 bits, i.e. one start bit (0), 8 data bits (lower bits in front), one mark

bit and one stop bit (1).

3. The indicator sends out a group of data every 100ms with 3 frames of data contained. See the

meaning in Figure (2-6).

First frame data: the mark bit is 0;

Signal ground

Connect the scoreboard

Scoreboard RS233 output interface

(Figure 2-5) Serial communication and scoreboard output interface signal back scheme of the machine housing

First frame

Bit

Start bit

Mark bit

Stop bit

(Figure 2-6.1) First frame oscillogram

Second frame

Bit

Start bit

Mark bit

Stop bit

(Figure 2-6.2) Second frame oscillogram

Third frame

Bit

Start bit

Mark bit

Stop bit

(Figure 2-6.3) Third frame oscillogram

X K 3 1 9 0 –DS3

(5)

X : D0、D1、D2 – is the position of decimal point ( 0～4 )

Y : D3 — is the symbol of weight ( 1－negative, 0－positive)

D4 — standby

G 18~G16: data of weight (net weight)

Second frame data: the mark bit is 0;

G 15~G8: data of weight (net weight)

Third frame data: the mark bit is 1;

G 7~G0: data of weight (net weight)

G0~G18: constitute the 19 bits binary codes of weight from low to high (net weight)

V. Connection between Serial Communication Interface and the Indicator and Their

Use

▲! Output lead of the communication interface and computer shall be connected accurately. Error

connection may damage the output interface of indicator, communication input interface of computer or

even damage the indicator, computer and corresponding external equipment.

▲! Operation related to computer communication requires necessary computer technology and

capability of programming. Therefore, it shall be participated or guided by professional technician.

Non-professionals are not allowed to connect the indicator.

The indicator XK3190-DS3 is equipped with RS232/RS422 (optional)/RS485(optional) serial

communication interface for communication purpose with computer.

1. Communication interface is equipped with 15 core RS233 connector assembly (shared with scoreboard). See

definition of pins 6, 7, and 8 (RS232) or 1, 2, 3, 4 and 8 (RS422/RS485) in Figure 2-5.

2. All datas are of ASCII code. Every group of data is constitute of 10 bits of data, the first bit is start bit, the 10th

bit is stop bit and the mid eight bits are data bits. Communication methods are divided into:

(1) Continuous mode:

Data being sent is the current weight (gross weight or net weight) displayed on indicator. Data of

each frame is comprised of 12 groups of data. See the forms as follows,

Byte X Content and Note

1 02(XON) Start

2 +or- Signbit

3 Weighingdata Higherbit

：Weighingdata :

8 Weighingdata Lowerbit

9 Decimalpoints Fromrighttoleft(0~4)

10 Xorchecking Fourhigherbits

11 Xorchecking Fourlowerbit

12 03(X0FF) End

Xor =2⊕3⊕……8⊕9

(2). Command mode:

Corresponding data is sent by the indicator by command from host computer. With an command sent

from the host computer, the indicator outputs a frame of corresponding data. Commands sent by host

computer are as follows,

X byte Content and Note

1 02(XON) Start

2 A~Z SerialNo.ofAddress

A~E Command （command）A: Hand shaking

CommandB:Readinggrossweight

CommandC:Readingtare

CommandD:Readingnetweight

4 Xorchecking Fourhigherbits

X K 3 1 9 0 –DS3

(6)

X byte Content and Note

5 Xor checking （Fourlowerbits

6 03(X0FF) End

Xor=2⊕3

Contents output by the indicator:

X byte Content and Note

1 02(XON) Start

2 A~Z No.ofAddress

3 A~E CommandA:Handshaking

Command B: Input the gross weight

Command C: Input the tare

Command D: Input the net weight

4 Press command to output corresponding data

: Press command to output corresponding data

n-1 Press command to output corresponding data

n Press command to output corresponding data

n+1 Xorchecking Fourhigherbits

n+2 Xorchecking Fourlowerbits

n+3 03(X0FF) End

Xor=2⊕3⊕……( n-1 )⊕n

Contents of 4~n output by the indicator are as follows,

Command

A No data Each frame is composed of six

groups of data

Command

Gross weight, form:

a: Symbol(+or-)

b: Gross weight value ( 6 bits）

: (Fromhighertolower)

Each frame is composed of 14

groups of data

h: Decimal point from right to left (0～4)

Command

Tare, form:

a: Symbol(+or-)

b: Tarevalue(6bits）

: (Fromhighertolower)

Each frame is composed of 14

groups of data

h: Decimal point from right to left (0～4)

Command

Net weight, form:

a: Symbol(+or-)

b: Netweightvalue(6bits)

: (Fromhighertolower)

Each frame is composed of 14

groups of data

h: Decimal point from right to left (0～4)

Note 1: Xor checking four higher and lower bits’ confirmation: Xor value and four higher and lower

bits are smaller than or equal to 9 will be added with 30h and turned to be ASCII code number for

sending, for example, four higher bits of Xor checking is 6, and this plus 36h is 6 in ASCII for sending

out; Xor, four higher bits and four lower bits which are larger than 9 will be added with 37h and turn to

X K 3 1 9 0 –DS3

(7)

be ASCII code letter for sending, for example, Xor checking four higher bit is B. With 37h added, it is

42h, i.e. letter B in ASCII code for sending out.

3. Command list sent by host computer (set address of the indicator as 01):

Category Content of Command Host computer sends out commands (hexadecimal)

Command A Hand shaking 02 41 41 30 30 03

Command B Reading gross weight 02 41 42 30 33 03

Command C Reading tare 02 41 43 30 32 03

Command D Reading net weight 02 41 44 30 35 03

4. Indicator communication parameter setting:

(1). Communication parameters

Communication parameters are made up of three groups of parameters, i.e. communication address, baud

rate and communication method.

(2) Steps for setting communication parameters:

Step Operation Displayed content Note

Press [Parameter

setting]

In the weighing and

displaying state

Press [9][8]

Press [Input]

[ P 00 ]

[ P 98 ]

Input the setting password “98”

Press [1]

Press [Input]

[ Ad r ** ]

[ Ad r 01]

Address ( 01～26 )

E.g.: 1

Press [1]

Press [Input]

[ b t * ]

[ b t 1]

Baud rates of serial communication (0~4)

means following baud rates respectively:

600, 1200, 2400, 4800 and 9600 baud rates.

E.g.:1

Press [0]

Press [Input]

[ t F * ]

[ t F 0 ]

Way of serial communication:

0—Continuous send mode, no reception

1—Appointed answering mode

2—Old D2+ continuous communication

format, 8 bits every frame

3—New D2+ continuous communication

format, 9 bits every frame

（See Note 2）

E.g. 0

6 Weighing state Communication parameter setting is

completed

Note 2: In the old D2+ continuous communication format, data is output in form of ASC code with 8Ⅱ

bits in every frame (including the decimal point). Lower bits of the data are sent at first and then

the higher ones. The frames are divided by “=”. Data being sent is the net weight (i.e. the value

displayed on indicator), for example, when the value 70.15 is displayed, the indicator

continuously sends out 51.0700＝51.0700＝51.0700…….

In the new D2+ (300 tons) continuous communication format, data is output in form of

ASC code with 9 bits in every frame (including the decimal point). Lower bits of the data areⅡ

sent at first and then the higher ones. The frames are divided by “=”. Data being sent is the net

weight (i.e. the value displayed on indicator), for example, when the value 70.15 is displayed,

the indicator continuously sends out 51.07000＝51.07000＝51.07000…...

Chapter 3 Operation Method

X K 3 1 9 0 –DS3

(8)

I. Startup and Auto Startup Zero Setting

1. Connect the AC power source or external battery and turn on the power to conduct stroke self-check of

“9999999”~ “0000000” and then enter into weighing state automatically after this.

2. During the process of stroke self-check, you may press any key to stop the self-check.

3. After starting up, if weight on the scale is deviated from null point but still within the setting range, the

indicator will conduct zero setting automatically. See detailed parameter selection and setting methods of

startup zero setting in relevant chapter of calibration.

During normal operation, please turn the calibration switch to non-calibration position.

II. Manual Zero Setting (Semi-auto Zero Setting)

1. Press [Zero] to make the indicator setting return to zero. At this moment, null position identifier lights up.

2. When the displayed value is deviated from null point but still within range of zero setting, the key [Zero] will

work; otherwise, it will not work. See detailed parameter selection and setting methods of zero setting in

relevant chapter of calibration.

3. Zero setting may only be conducted when the stable identifier is on.

III. Tare operation

1. There are three tare methods:

(1) Normal tare:

Under weighing displaying state, when weight is positive and stable, press [Tare] to deduct the value

displayed as tare weight. At this moment, the instrument displays the net weight 0 and the tare light is

on.

(2) Preset tare:

Under weighing displaying state, press [Tare] to see [P ***.**] displayed on the indicator. This is the

original tare weight. For setting a new tare weight, please input the value with number keys and press

[Input] for confirmation.

(3) Call tare weight by vehicle no.:

Under weighing displaying state, press [Vehicle No.] to see [o *****] displayed on the indicator.

Please input the correct vehicle no. with number keys and press [Tare]. At this moment, the indicator

may find a tare weight corresponding to the vehicle no. from its memory for use.

Under weighing displaying state, continuous tare operation may be conducted. When tare weight is 0, the tare

light is off; when the indicator meets the requirement of zero setting, press [Zero] to set the tare weight to zero.

At this moment, the tare light is off.

IV. Set Date and Time

Under weighing state, press [Clock] to see current date on the indicator. Enter the

correct date and press [Input] for confirmation. The indicator then displays current time

and runs automatically. At this moment, input the correct time and press [Input] for confirmation to

complete date and time setting.

V. Use of Battery

1. When using battery for power supply, it displays “Battery capacity” on the left side of display

window for indicating the remaining electricity; when three indicating lights are all on, there is

sufficient electricity; when the lower two identifiers are on, there is still comparatively sufficient

electricity and when only the bottom one is on, it indicates the electricity is low. When the

electricity is not sufficient, please charge the battery. Further use may decrease the battery

capacity till the instrument automatically power off for protecting the battery.

2. After connecting the battery to the indicator and switching on the AC power, the indicator may

charge the battery (full charge needs about 20 hours). Whether the power switch is turned on or

off, the battery will be charged. However, it is recommended to charge .

3. The first time the battery is used, make sure it is fully charged.

4. On the connecting line of battery, the plug marked with red color is the positive pole (+) and it

shall be connected with the positive pole of battery and the one marked with black color is the

negative pole (-) and it shall be connected with the negative pole of battery.

5. For protecting the indicator and battery, both wrong connection of the battery’s positive and

negative poles or short-circuit may cause circuit broken of DC resettable fuse to protect the

indicator and battery. Then, please connect the battery properly and restart the indicaotr for

regular service.

6. As batteries are consumables, they are not in warranty scope.

X K 3 1 9 0 –DS3

(9)

VI. Internal Code Display

1. Under weighing state, press [Set] and input [2] and [8] to enter the inner code displaying

state with inner code indicating light on; then re-press [Set] and input [2] and [8] to quit the

inner code displaying state with inner code indicating light off.

2. Under inner code displaying state, keys except [Zero] and [Set] are invalid.

3. 20 internal codes are equal to a division value. For example, a scale with its n=3000, the

full capicity inner code is 60000.

VII. Save Data Record

1. Vehicle no. of the indicator is 5-bit number and article no. is 3-bit number. 1000 vehicle

numbers and 201 article numbers can be saved.

2. The record of a group of data will be printed out at after a complete set of data is saved

(relevant printing setting shall be valid).

3. Three methods of data storage:

1) Save weight for empty vehicle at first and then for full vehicle or save weight for full vehicle at first and

then for empty vehicle, i.e. a complete record is composed of two times’ data saving.

2) For weighing full vehicle with known tare weight, one time of data saving may form a complete record.

3) For weighing just article, one time of data saving may form a complete record.

For recognizing and classifying three above situations, we make following agreement for

XK3190-DS3:

▲ The vehicle no. shall be a number within the range of 00001～99999, i.e. 00000 cannot be kept as

a real vehicle number. When being set as 00000, it means that the object being weighed is not a

vehicle with article but only a article.

▲ When [Tare] light is on, the tare is known and therefore one time data saving may constitute a

complete record.

▲ When vehicle no. is an any 5-bit number other than 00000, the highest bit of parameter Y in the

printing parameters is set as 0 and the tare light of indicator is not on, two times’ saving may

constitute a complete record.

4. Saving Method:

(Table3-1)

Step Operation Displayed content Note

Press [Print]

Under weighing displaying

state

Input the vehicle no. by pressing number

keys

Press [Input]

[ o *****]

[ o 03217]

Input the vehicle no.

E.g.: 03217

Input the article no.

Press [Input]

[hn **]

[hn 35]

Input the article no.

E.g.: 35

Press [10]

Press [Input]

[BFL **]

[BFL 10]

Input the percentage of discount

rate

E.g.: 10

Complete saving

Data saving of indicator may adopt the way of vehicle number. or not. See detailed information in the

chapter printing settings. If setting as not using vehicle number, there will be no operations, steps or

printing contents about vehicle number. Similarly, data saving of indicator may adopt the way of

article number or not. See details in the chapter about printing settings.

▲ ! When data is unstable or when gross weight ≤0 or net weight≤0, data cannot be

saved.

5. About automatic save and printing:

1) See setting about automatic save and printing in the chapter about printing settings.

2) Automatic save and printing have no operation method of two times’ saving.

3) The vehicle number and article number saved during the process of automatic saving are the vehicle number and

article number set before saving.

4) Tare weight during the process of automatic saving has following three detailed occasions,

(1) When tare light is on, the current tare weight will be recorded in the group of data.

(2) When tare light isn’t bright, the indicator will automatically search for tare weight of the vehicle from its

memory and save this tare weight in current group of record.

(3) When tare light isn’t bright and there is no tare weight of the vehicle saved in memory, 0 will be judged

X K 3 1 9 0 –DS3

(10)

as the tare weight and saved in the group of record.

6. When vehicle numbers are more than 1000, [Err 10] will be displayed on the indicator. A vehicle

number or all contents recorded may be deleted in the way introduced in Chapter 11.

VIII. Operation of Printing

1. Printing settings (Table 3-2)

Step Operation Displayed content Note

Press [Set]

Press [9] [7]

Press [Input]

[ P 00]

[ P 97]

Input the password 97

Press [1]

Press [Input]

[Auto *]

[Auto 1]

Select auto/manual printing

（0-Manual 1-Auto）

E.g.: Select 1 (Automatic printing)

Press [3]

Press [Input]

Auto identifier lights up

[Type *]

[Type 3]

Select type of printer

0--Invalid printing

1--TPup16 micro-printer (English)

2--TM800 printer

3—Panasonic KX-P1121

4--EPSON LQ-1600K, LQ300K＋,

Panasonic KX-P1131

5--Reserved

6—External thermal micro-printer POS58 and

T58D etc.

E.g.: Select 3

Press [5] [0]

Press [Input]

[ HL **]

[ HL 50]

Print only when:

00-Back to zero

25-Back to <25% F.S.

50- Back to <50% F.S.

75- Back to <75% F.S.

99- Even it’s F.S.

for example: 50

Press [3]

Press [Input]

[Arr *]

[Arr 3]

Select print form

Arr=

0: record format

1: 1-page linked format

2: 2-page linked format

3: 3-page linked format

for example: 3

Press [1] [0] [0]

Press [Input]

[L *****]

[L001.00]

Set min. weight for auto

print function

It must be lager than 10d

for example: 1.00

7 Press[0][5]

Press [Input]

[b **]

[b 05]

Rows for printer(0~30)

for example: 05

Press [1]

Press [Input]

[odE *]

[odE 0]

Select filled-in print:

0-Not select

1-Select

for example: 0

Press [1]

Press [Input]

[dct *]

[dct 0]

Select discount rate at

filled-in print form:

0-Not use discount rate

1-Use discount rate

for example: 0

10 Press [0] [0] [0][1][1]

Press [Input]

[Y *****]

[Y 00011]

Parameter Y has 5 digits, they are respectively

1st~5th digit from left to right. Their functions

are as follows,

1st digit: 0 twice weighing and printing

mode;

1 once weighing and printing

mode;

2nd digit: 0 Do not use the function of

power saving;

1 Use the function of power

saving;

X K 3 1 9 0 –DS3

(11)

Step Operation Displayed content Note

3rd digit: 0 Unit of weight is kilogram

1 Unitofweightiston;

4th digit: 0 Do not use article number in

data record

1 Usearticlenumberindata

record;

5th digit: 0 Do not use vehicle number in

data record

1 Use vehicle number in data

record;

E.g.: Select 00011

End of operation

Note: (1) When using an external printer, types of printers are 1, 2, 3, 4 and 6 according to different

style of printers.

(2) Steps 8 and 9 are only applicable to printers of type 2 and 3 Instead of others.

▲! Discount rate will be selected only when the print format is filled-in.

★ See detailed printing forms in appendix.

★ Special format carbon-free duplicating and typing paper can be used for Filled type printing

for quick print in triplicate. Special format normal typing paper may also be used for quick

print in one copy.

★ For commanding filled type printing of special format, please contact the distributor.

2. Data saving and printing of the indicator are conducted at the same time. Press [Print], you may

print the weighing record while a complete group of record is saved (setting of printing have to be

valid).

3. For printing failure of weighing record caused by some reasons (for example, printer fault),

current record may be printed by press [Suppl Print] after relevant fault is removed.

4. After weighing, you may press [Accumulated Printing] to print the accumulated recording amount

of this group.

5. When twice weighing and printing mode is set in the indicator, with the twice saving method of

empty vehicle at first and then heavy one or heavy vehicle at first and then empty one, as the

record is still not complete during the first time of saving, [LoAd] will be displayed on the

indicator for about 1.5 seconds for reminding the operator. However, printing will not be

conducted now. At this moment, you may press [Suppl Printing] to print the incomplete record

out.

Results of printing will always be: 1,Serial no.:blank;

2,Gross W, net W:0

3,Tare W: Current display

(See information about setting of twice weighing and printing mode in contents about parameter Y in

printing setting)

6. When once weighing and printing mode is set in the indicator, data for each time of weighing will

be saved and printed as a complete record. Under tare state, the indicator will regard current tare

weight as the one to be recorded. If not, the indicator will call the corresponding memorized tare

weight saved in indicator and regard the value as tare weight to be recorded (tare weight will be

recorded as 0 if there is no memorized tare weight). See information about setting of once

weighing and printing mode in contents about parameter Y in printing setting.

IX. Report Printing

1. Press [Report], input the date and press [Input] to print daily report on the basis of classified

statistics (i.e. statistical form made according to time sequence, vehicle number and article

number).

2. Press [Report] and [1] to print summary report 1 (i.e. statistical form made according to time

sequence)

3. Press [Report] and [2] to print summary report 2 (i.e. statistical form made according to vehicle

number)

4. Press [Report] and [3] to print summary report 3 (i.e. statistical form made according to article

number)

5. Press [Report] and [4] to print summary report 4 (i.e. tare report made according to vehicle

number)

X K 3 1 9 0 –DS3

(12)

X. Inquiry Record

All kinds of recorded contents in the indicator can be checked by using the key [Check] in

differentways.Seedetailedoperationwaysasfollows,

1. Check weighing record according to date (Table 4-4)

Step Operation Displayed content Note

Press [Check]

Under weighing

state

[rEAd 1]

Select the content and format to be checked

rEAd＝1-- Check all record of a day

2--Check all record of a vehicle number

3-- Check all record of a article number

4—Check vehicle number

Input the date

Press [Check]

[d **.**.**]

[d 08.08.25]

Select the date you want to check:

E.g.: August 25

Each time of record of August 25th, 2008 will then be

displayed in sequence.

Press [Check]

[no 0001]

[t**.**.**]

[o *****]

[hn ***]

[A *****]

[t *****]

[n *****]

Firsttime

Time (Hour/Minute)

VehicleNo.

ArticleNo. Recordofthefirsttime

GrossWeight

Tare

NetWeight

Press [Check]

[no 0002]

[t**.**.**]

[o *****]

[hn ***]

[A *****]

[t *****]

[n *****]

Second time

Time (Hour/Minute)

VehicleNo.

Article No. Record of the second time

GrossWeight

Tare

Net Weight

… … …

Press [Check]

[ End ] End

Return to weighing

and displaying state

(1) At Step 2, you may delete all weighing record of the date by pressing [Zero Setting]. (Reset

mode )④

(2) In Step 3 and after that, you may delete the group of weighing record you are checking by

pressing [Zero]. (Reset mode )⑦

(3) After entering in the state of checking, [Check] and [Input] keys have same functions.

2. Check weighing record according to vehicle number (Table 4-5)

Step Operation Displayed content Note

Press [Check]

Press [2]

In weighing state

[rEAd 1]

[rEAd 2]

Select 2 means check record according to vehicle number

2 Press [Check]

Input the vehicle

number

[o *****]

[o 12345]

Select the vehicle number for checking

E.g.: 12345

Then, all weighing record of vehicle 12345 will be

displayed.

3 Press [Check]

Press [Check]

[no 0001]

[d**.**.**]

[t**.**.**]

[hn ***]

[A *****]

[t *****]

[n *****]

Date (Month/Date)

Time (Hour/Minute)

ArticleNo. Recordofthefirsttime

GrossWeight

Tare

NetWeight

4 Press [Check]

Press [Check]

[no 0002]

[d**.**.**]

Date (Month/Date)

X K 3 1 9 0 –DS3

(13)

Step Operation Displayed content Note

Press [Check]

[t**.**.**]

[hn ***]

[A *****]

[t *****]

[n *****]

Time (Hour/Minute)

Article No. Record of the second time

GrossWeight

Tare

Net Weight

… … …

[ End ] End

(1) At Step 2, you may delete all record of the vehicle number but maintain its memorial tare

weight by pressing [Zero]. (Reset mode ⑤)

(2) At Step 4 and after that, you may delete the group of weighing record you are checking by

pressing [Zero Setting]. (Reset mode )⑦

(3) After entering in the state of checking, [Check] and [Input] keys have same functions.

3. Check weighing record according to article number (Table 4-6)

Step Operation Displayed

content

Note

1 Press [Check]

Press [3]

Press [Check]

In weighing

state,

[rEAd 1]

[EAd 3]

Select 3 means checking record according to

article number

2 Input the

article no.

Press [Check]

[hn **]

[hn 23]

Select the article number for record checking, e.g.:23;

Then all weighing record of article with serial

number 23 will be displayed.

3 Press [Check]

Press [Check]

[no 0001]

[o *****]

[d**.**.**]

[t**.**.**]

[A *****]

[t *****]

Vehicle Number

Date (Month/Date)

Time (Hour/Minute) Record of the first time

GrossWeight

Tare

4 Press [Check]

Press [Check]

[no 0002]

[o *****]

[d**.**.**]

[t**.**.**]

[A *****]

[t *****]

Vehicle Number

Date (Month/Date)

Time (Hour/Minute) Record of the second time

GrossWeight

Tare

… … …

[ End ] End

(1) In Step 2, you may delete all record of the article number by pressing [Zero]. (Reset mode

⑥)

(2) In Step 3 and after that, you may delete the group of weighing record you are checking by

pressing [Zero]. (Reset mode )⑦

(3) After entering in the state of checking, [Check] and [Input] keys have same functions.

4. Vehicle no. checking (Table 4-7)

Step Operation Displayed content Note

Press [Check]

Press [4]

Press [Check]

In weighing state

[rEAd 1]

[rEAd 4]

Selecting 4 means vehicle

number checking

Press [Check]

[no 001]

[o *****]

The first vehicle no.

3 [no 002]

X K 3 1 9 0 –DS3

(14)

Press [Check]

[o *****]

The second vehicle no.

… … …

Press [Check]

[no nnn]

[o *****]

The last vehicle no.

Press [Check]

[ End ]

Return to weighing

displaying state

(1) During the process of above operation, when the vehicle number is displayed, you may delete the

vehicle number, its memorial tare and all weighing record of the vehicle number by pressing

[Zero]. (Reset mode ②)

(2) After entering in the state of checking, [Check] and [Input] keys have same functions.

XI. Operation of Clearing Record

1. The indicator has following record clearing modes:

Mode : Clear all record (inlcuding all vehicle numbers and①memorized tare weight)

Mode : Clear a vehicle number,②memorized weight and all the corresponding weighing records of

the vehicle number;

Mode :Cleartheweighingrecord③saved at last time;

Mode :Clearallrecord④s of a certain date;

Mode : Clear all the corresponding weighing record⑤s of a vehicle number (but reserve the vehicle

number and its memorized tare)

Mode :⑥Clear all the corresponding weighing records of a vehicle number;

Mode :⑦Clear a random weighing record in the instrument.

2. Using any record clearing mode, [] will be displayed on the indicator for operator’s confirmation. When

[Sure]= a non-zero number, press [Input] for confirmation. For negation, set [Sure]=0 and press [Input] or

[Weighing] to quit.

3. Operation method:

1) Under weighing state, press [Clear] to clear all records. [Mode ①]

2) Under weighing state, press the key [Vehicle No.], input the vehicle number with number keys and

press [Clear] to clear the vehicle number, its corresponding memorized tare weight and record.

[Mode ②]

3) Under weighing state, press [Clear], [9] and then [Input] to clear the record saved at last time. [Mode

③]

4) See clearing modes , , and in the chapter of data record and check.④⑤⑥ ⑦

▲! The 1000 groups of records contain the records cleared by modes ②, ③, ⑤, ⑥and ,⑦i.e.

clear records by pressing ②, ③, ⑤, ⑥and ⑦may cause the decreasing of max capacity of

record quantity. Clearing by mode ①, the max capacity of record quantity will be recovered to

1000 groups. If not clearing records by mode ①all the while, decreased records will be recovered

gradually.

▲! Cleared data is nonrecoverable. So please be careful to avoid incorrect operation and

data loss.

▲! All weighing records shall be cleared after calibration or printing parameter

modification.

X K 3 1 9 0 –DS3

(15)

XII. Input Method of Saving Tare weight

The indicator can save 1000 tare weight for a long time. Three input modes are as follows,

1. Input tare with number keys: (* is the original setting value) (Table 3-8)

Step Operation Displayedcontent Note

Press [Vehicle

No.]

Under weighing and

displaying state

Input the

vehicle no.

Press [Input]

[o *****]

[o 35790]

Input the vehicle number, e.g.: 35790

Input the tare

Press [Input]

[P *****]

[P 01000]

Input the tare, e.g.: 1000(kg)

4 Return to weighing and

displaying state

End

2. Tare saving by weighing

Under tare displaying state, load an empty vehicle on the weighing platform, wait until the scale is

stable, press [Tare Storing], input the vehicle number and press [Input].

3. For saving a group of weighing record, if there is no memorized tare weight of the vehicle number

in memory of the indicator, the tare value of this group recorded will be regarded as memorized tare

of the vehicle and saved in memory.

XIII. Power Saving Function

When the function of power saving is set as valid, the indicator will automatically come into

power saving state after at null position (before tare) for 30 seconds (LED display is off and state

indicating sign maintain). At this moment, it will be back to normal display state by pressing any key

or getting out of the null position state.

See information about setting of power saving in contents about parameter Y in print setting)

XIV. Adjustment of Brightness

XK3190-DS3 has 6 levels of brightness for adjustment.

Press [Brightness] once to adjust the brightness to a higher level. When the brightness is adjusted

to the highest level, the buzzer will send out a long alarm sound to remind the operator. At highest

brightness level, the brightness will be darkest by pressing [Brightness] again. Repeat this procedure

for proper brightness.

XV. Switch between Gross Weight and Net Weight

Under weighing state, when there is tare weight(net weight displaying state), the indicator may be

switched to gross weight displaying state by pressing [Gross/Net Weight] and then switched back to

the original net weight displaying state by pressing [Gross/Net Weight] again.

After tare or preset tare weight, the indicator enters into net weight displaying state automatically.

When there is no tare weight, the indicator will stay under gross weight displaying state and the

key [Gross/Net Weight] will be invalid.

X K 3 1 9 0 –DS3

(16)

Chapter Four Maintenance and Attentions

1. To ensure clarity of display and service life of indicator, the indicator should be used off direct

sunlight and should be kept at flat place.

2. Do not use the indicator in place of much dust, serious vibration or humidity .

3. Connection between load cell and indicator shall be reliable and the system should have valid

grounding. Keep them away from high electric and high magnetic fields. Load cell and indicator

shall be kept away from highly corrosive object and inflammable and explosive materials.

▲ ! Do not use in occasion with inflammable gas or stream or system with pressure vessel tank.

▲ ! Do not use in area with high frequency of thunder. Reliable lightning protectors shall be

installed for ensuring personnel security of operators and preventing damage of indicator and

relevant equipment caused by thunder.

▲ ! As load cell and indicator are both static-sensitive equipment, feasible anti-static precautions

must be taken during the process of use. Welding operation or other high electric field

operations are strictly prohibited on weighing platform; in the season of thunder storm,

reliable lightning protection measures must be taken for preventing load cell and indicator

from damage caused by thunder and ensuring personnel security and safe operation of

weighing equipment and relevant equipment.

4. Do not use strong solvent (e.g. benzene or nitro oil) for cleaning the machine housing.

5. Do not inject fluid or other conductive particle into the indicator so as to prevent damage of

instrument and electric shock.

6. Before plugging or unplugging connecting wire between indicator and external equipment, please

cut off the electricity supply of indicator and relevant equipment.

▲ ! Before plugging or unplugging connecting wire of load cell, please cut off the power

supply of indicator at first.

▲ ! Before plugging or unplugging connecting wire of printer, please cut off the power

supply of printer and indicator at first.

▲ ! Before plugging or unplugging connecting wire of scoreboard, please cut off the power

supply of scoreboard and indicator at first.

▲ ! Before plugging or unplugging connecting wire for communication, please cut off the

power supply of indicator and host computer at first.

7. The Company advises our customers to check and accept before using instrument products

of the Company. We are only responsible to quality of the indicator itself. The highest

compensation amount is within double value of the fault indicator. We assume no

responsibility for system problem of the indicator.

8. External interfaces of the indicator shall be used according to methods defined in the operation

commands. No unauthorized modification to the connection is allowed. In case of any failure,

please unplug the plug and send the indicator to professional manufacturer for maintenance.

Unprofessional weighing apparatus manufacturers are not allowed to fix the indicator by

themselves in command to avoid greater damage. The indicator shall not be opened at random.

Otherwise, we will provide no warranty service.

9. Batteries are consumables and they are not in warranty scope.

▲! For extending service life of battery, please use it after full charge.

For long time unused, please charge the battery once every two months for 20 hours each time.

▲! Handle with care during transportation and installation. Avoid strong vibration, strike or impact in

command to avoid short circuit inside the batteries and damage of batteries.

10. Within 1 year since the indicator is sold, under normal use conditions, damages not caused by

man-made fault belong to the warranty scope. Please mail the product and warranty card (with

matched ID) to authorized maintenance point or the supplier. The manufacturer provides life-long

maintenance service for the indicator.

X K 3 1 9 0 –DS3

(17)

Chapter Five Information Cue

I. Regular information cue:

1. means:Please wait, the indicator is conducting internal calculation. Do not carry

out any operation now.

2. Prnt means: Please wait; data is transmitted between the indicator and printer.

3. LoAd means: Data save. It will be displayed for less than two seconds for giving a cue

to the operator.

II. Error operation information cue:

1. Err 03 means: overload alarm, all or part of the load must be unloaded at once.

2. Err 08 means: No matched record is found or inquiry condition is wrong.

3. Err 10 means: Vehicle numbers saved are more than 1000.

4. Err 17 means: Parameter setting does not meet the requirement, please reset it.

5. Err 19 means: Printing cannot be conducted in occasion of zero or negative weighing,

unstable weighing or unfulfilled zero reset condition.

6. Err 28 means: When the print date is earlier than that saved in weighing record, please

reset date and clear all record.

III. Error connection information cue:

1. Err P means: Error printer connection or printer fault. Press any key to exit and

re-connect the printer or replace it with another one.

2. Erd ** means: The digital load cell with address “**” has communication failures.

(1) If this is a scale in use, we may judge whether there is a connection failure or the

communication interface of load cell is damaged.

(2) If this is the scale is not debugging, you can check according to the following command

a. Check carefully if the connection wire of load cell is connected properly.

b. Check if address of load cell is right without replication.

c. Please re-set the quantity of load cells.

IV. Information cue of components and parts failure and elimination methods

1. Err 18 means: The keyboard fails. This will be displayed for 10 seconds before entering

into weighing displaying page. The keyboard shall be replaced.

2. Err 20 means: a part of the data in RAM has been lost. Plug the calibration socket into

the indicator and restart it for self-check. After this, without finding the

occurrence of Err 20, the calibration socket may be unplugged.

3. Err21 means:RAMandE

2PROM calibration data are data lost. Please plug the

calibration socket, re-enter the original calibration data and restart the indicator

or conduct calibration again.

4. Err 22 means: RAM destroyed; please replace it with a new chip and then conduct

calibration again.

5. Err23 means:E

2PROM destroyed; please replace it, re-enter the original calibration

X K 3 1 9 0 –DS3

(18)

data and then restart the indicator or conduct calibration again.

6. Err 25 means: illegally duplicated software or E2PROM. destroyed

Appendix 1: (applicable to printers of TYPE=2, 3 and 4)

Bills in a set:

WeighingSheet WeighingSheet WeighingSheet

No. 0001 No. 0001 No. 0001

Date 1999-07- Date 1999-07-28 Date 1999-07-28

Time 12.02.31 Time 12.02.31 Time 12.02.31

Vehicle No. 12345 Vehicle No. 12345 Vehicle No. 12345

Article No. 022 Article No. 022 Article No. 022

Gross Wei

ht 2.000

(

Gross Wei

ht 2.000

(

Gross Wei

ht 2.000

(

）

Tare Wei

ht 0.300

(

Tare Wei

ht 0.300

(

Tare Wei

ht 0.300

(

Net Wei

ht 1.700

(

Net Wei

ht 1.700

(

Net Wei

ht 1.700

(

Recording format:

Weighing Sheet Date: July 28, 1999

No. Time Vehicle No. Article No. Gross Wei

(

Tare

(

Net Wei

(

0002 12.03.24 12345 033 2.000 0.300 1.700

0003 12.03.24 00888 033 2.000 0.300 1.700

0004 12.04.11 00888 022 2.000 0.300 1.700

Accumulated amount: Gross weight: 8.000(kg) Net weight: 6.800(kg)

Filled type: (the printing procedure will take only 5 seconds)

WEIGHT BILL

erator

SERIAL No. 123

DATE 1999-07-28

TIME 12 .35 .28

VEHICLE No.

ARTICLE No.

GROSS 1580

TARE 80

DISCOUNT RATE 10

NET 1350

REMAR

Appendix 2: (applicable to printers of TYPE=2, 3 and 4)

Daily Sheet 1 Date: July 28, 1999

No. Time Vehicle No. Article No. Gross Weight (kg) Tare (kg) Net Weight (kg)

0002 12.03.24 12345 033 2.000 0.300 1.700

0003 12.03.24 00888 033 2.000 0.300 1.700

0004 12.04.11 00888 022 2.000 0.300 1.700

Accumulated amount: Gross weight: 8.000(kg) Net weight: 6.800(kg)

Daily Sheet 2 Date: July 28, 1999

No. Vehicle No.

Vehicle Weight

(kg)

Times Gross Weight (kg) Total Net Weight

(kg)

0001 12345 0.300 0002 4．000 3．400

0002 00888 0.300 0002 4．000 3．400

Table of contents

Popular Controllers manuals by other brands

Stagnoli

Stagnoli D241000 Instructions for use

Johnson Controls

Johnson Controls VA7820-HG*-2 Series installation guide

YASKAWA

YASKAWA CDBR-****D User & installation manual

oventrop

oventrop DN 15 quick start guide

Elko

Elko iNels SA3-022M quick start guide

Joy-it

Joy-it BUTTON22 quick start guide

Arturia

Arturia KEYLAB mkII user manual

ABB

ABB AC 800M user manual

Novatech

Novatech Pulsafeeder MicroVision Timer Installation & operation manual

Jäger

Jäger OPUS RADIO PLUS Installation and operating instructions

Hunter

Hunter NODE-BT quick start guide

S&C

S&C BankGuard PLUS Installation

Santerno

Santerno Sinus Penta Basic user manual

Samson

Samson 43-1 Mounting and operating instructions

NuForce

NuForce AVP-16 brochure

Victron energy

Victron energy CCGX manual

YASKAWA

YASKAWA GA800 Series Installation & Primary Operation

Rinnai

Rinnai MC-601Q Operation & installation manual

Pro XK3190-DS3 User manual

Popular Controllers manuals by other brands